10118656-1000 Amphenol

1.25mm WIRE-TO-BOARD (CRIMP-TO-WIRE) HAND TOOL P/N: 10118656-1000 FCI MANUAL P/N 10118656-9090 FCI USA LLC Manual Part. No. 10118656-9090 Issued: (2011/09/12) Page 1 of 7 Revision B Introduction General Description This instruction manual covers the use and maintenance of the 1.25mm WTB crimp-to-wire hand tool, as designed for the strip version of 1.25mm WTB terminal with use of 28-32 awg wire. Cautions This tool is designed to be used with the strip form of the reeled product o The reeled product should be cut into strips of 25mm to 50mm in length o Loose-piece terminals cannot be terminated with this tool and should not be attempted This tool is designed for prototype or field repair work only and is not intended for production o Request information regarding the availability of a Mini-Applicator from FCI for production quantities using the reeled fed terminals. o Do not add extensions to the handles or install this hand tool into any power assisted device. Doing so will damage the hand tool and void any remaining warranty. ******Please read these instructions thoroughly before using the hand-tool****** Safety Eye Protection: Eye protection should be worn at all times when operating or servicing hand tools. Safety glasses equipped with side-shields will increase protection against flying debris resulting from other operations in the proximity. CHECK DAMAGED PARTS. Before further use of the tool, a misused hand tool that appears to be damaged should be carefully checked to determine that it would operate properly and perform its intended function check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that may affect the operation. FCI USA LLC Manual Part. No. 10118656-9090 Issued: (2011/09/12) Page 2 of 7 Revision B