IDS-18-4 Amphenol RADSOK Power to Board The Amphenol Industrial Global Operations RADSOK solution RADSOK PowerBlok provides a high current single-point offers options for high current single-point connections with connection of up to 70 Amps to the PCB utilizing our custom 3.0mm a compact footprint design that can supply up to 120 Amps to RADSOK design. The compliant pins are press-fit into the board the board. The hyperbolic grid contact provides more surface to secure a solid connection and even current flow. The radial area with many points of contact for heat dissipation at the pin design ensures many points of contact, reduces failure modes, and and socket interface. This lowers temperature rise and reduces eliminates burn-outs and possible stress fractures. potential failures. RADSOK Power-to-Board products are designed to be applied manually by press-fit or by a re-flow RADSOK RADSERT provides a high power to board interconnect solder process eliminating the need for additional wires and/or in a small package. The RADSERT brings power to the board special crimp tools. from busbars suspended above the board and all of the board components. Pins from the busbar plug into the RADSOKs which are installed by press fitting the RADSOK into the RADSERT. RADSOK PGY is a right angle, co-planar or orthogonal card edge connector series available in 2.4mm, 3.6mm and 5.7mm contact sizes. The 5.7mm is the highest current board level product rated to 120 amperes. Connection to the board is through a solder reflow process. The busbar pin will mate horizontally with the RADSOK slightly above the board. RADSOK RadStack was designed to address the need for high current and small foot prints for PCB mezzanine applications. The RadStack is low-profile, 10mm to 50mm in any size increment using press fit attachment with a current range of 35A to 120A. www.amphenol-industrial.com RADSOK PowerBlok High power to board interconnect in a small package Compact footprint 15.7mm x 15.7mm RADSOK 2.4mm, 3.0mm & 3.6mm (35A-60A-70A) Backplane power interface with compliant pins for power Touchproof cover Hyperbolic socket design ensures many points of contact Reduces failure modes, eliminates burn outs No threaded fasteners No special crimp tools required Eliminates possible stress fractures in board Faster through-put RoHS compliant RADSOK RADSERT High power to board interconnect in a small package Hyperbolic socket design ensures many points of contact Solder version or pre-loaded RADSERTs are installed during board fabrication RADSERT 2.4mm (35A), 3.0mm (60A), 3.6mm (70A) 5.7mm (120A) No special crimp tools required No threaded fasteners Eliminates risk of PTH cracking or delamination in board Faster through-put RoHS compliant RADSOK PGY Orthogonal, co-planar & right angle connections between PCBs or PCB to bus bar Compact footprint Legs of the PGY distribute high power evenly 2.4mm carries up to 35 Amps 3.0mm carries up to 60 Amps 3.6mm carries up to 70 Amps 4.8mm carries up to 100 Amps 5.7mm carries up to 120 Amps No threaded fasteners No special crimp tools required Faster through-put RoHS compliant RADSOK RadStack Mezzanine connection between parallel PCBs Compact footprint Low-profile, 10mm to 50mm in any size increment 2.4mm carries up to 35 Amps 3.0mm carries up to 60 Amps 3.6mm carries up to 70 Amps 4.8mm carries up to 100 Amps 5.7mm carries up to 120 Amps Pressfit Faster through-put RoHS compliant Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors. For further information on your individual application requirements, contact: Amphenol Corporation North America: Europe: Middle East: Asia: Amphenol Industrial Operations Amphenol Industrial Operations Europe Amphenol Middle East Enterprises FZE Amphenol Technology (Zhuhai) Co., Ltd. 180 N. Freeport Drive, Plant 4 Via Barbaiana 5 Office C-37 PO Box 21107 No. 63 Xin Han Road, San Zao Town Nogales, AZ 85621 1-20020 Lainate (MI) Italy Ajman Free Zone, UAE Jin Wan District, Zhuhai City, China 519040 Tel: (888) 364-9011 Tel: +39 02 93254.204 Tel: +9 716-7422494 Tel: +86 756-3989760 Fax: (520) 285-5134 Fax: +39 02 93254.444 Fax: +9 716-7422941 Fax: +86 756-3989768 Email: tech amphenol-aio.com Email: info amphenol-aio.com Email: jhussain amphenol-industrial.com Email: enquiry amphenol-aio.com