PL-500FI SERIES Plastic Shell Auto-Coupling Connectors 14 pole capacity miniature circular field installable connector PL500FI FEATURES Ideal for rear-panel instrumentation and hand-held equipment, the compact and cost effective PL-500FI Series is designed to meet the efficient packaging demands of portable electronic devices Packaging (intuitive, compact, configurable) Performance (for harsh environments) Pulse-Lok auto-latch / mating confirmation Water proof (IP-67 rated) Miniature .520 diameter circular shell Steam, EtO, & Gamma sterilizable Up to 14 contact positions Chemical resistant housing 14 standard color combinations Up to 5,000 mating cycles (with std. Multiple and proprietary keying options Contacts) Available as an overmolded cable assembly Factory terminated, overmolded cable Custom configurations available assemblies for enhanced flex and strain relief SPECIFICATIONS Mechanical Environmental Electrical (see below) Mating Cycles: 5K cycles Operating Temp: -40C to +105C** Mating Life: 5,000 cycles min. Retention Force: Moisture Resistance: to IP-67 (encapsulated) Contact Resistance: < 10 milliohms* Mated Connectors: 15 lbs. Minimum Sterilizable: gamma, EtO & Autoclave Cable to Connector: 25 lbs. Typical Chem. Resistance: common OR cleaning solvents Material Backshell to Connector: 35 lbs. Minimum * post conditioning Connector Housing: Nylon 12 Cable Diameter range = .115 to .250 **Dependent on overmold material Flex Reliefs: Thermoplastic Rubber Contacts: Brass / BeCu, Gold Plate per MIL-G-45204 TABLE A: STANDARD CONTACT CONFIGURATIONS & SPECFICATIONS Up to 14 Contact Contact Contact Size Pin Operating Operating Positions Number of Poles Max Wire Gauge Resistance (mm) Voltage Max Current Max (A) (ohms) 14 0.5 26 300 V RMS 0.9 <14m 10 0.5 26 300 V RMS 1.2 <14m 8 0.7 22 300 V RMS 1.8 <6m 7 0.7 22 300 V RMS 2.1 <6m 6 0.7 22 300 V RMS 2.1 <6m 5 0.7 22 300 V RMS 2.4 <6m 4 0.7 22 300 V RMS 2.4 <6m 3 0.7 22 300 V RMS 3.0 <6m 2 0.7 22 300 V RMS 3.0 <6m 1 0.7 22 300 V RMS 3.0 <6m 1 1.5 16 300 V RMS 7.0 <2m Custom contact inserts are available. Consult factory. STANDARD HOUSING OPTIONS Rear Panel-Mount In-Line Receptacle Assembly In-Line Plug Assembly Receptacle Assembly .520 .520 Mounts from back of panel 1.35 to achieve an IP-67 Seal In-Line Plug Kit .320 typ .625 1.45 1.02 Panel thickness range = .063 to .125 Select this component from Table B Select this component from Table B Select this component from Table B Connector housings are illustrated in gray with black couplers and backshells. Standard color is black on black. See our online configurator for color options at : www.amphenolalden.com/configurator *All dimensions shown in inches except where indicated Phone: 508-427-7000 For additional information about this, or any other Amphenol Alden product, please contact Fax: 508-583-0164 1 an Amphenol Alden specialist today. www.amphenolalden.com PL-500FI SERIES Plastic 14 pole capacity miniature circular field installable connector TABLE B: STANDARD PART NUMBERS Number of Poles In-Line Receptacle Rear Panel-Mount Receptacle In-Line Plug Solder Cup Solder Cup PCB Solder Cup 14 327104 327212 327204 327004 10 324100 327208 327200 327000 8 324140 327276 327280 327040 7 327136 327268 327272 327036 6 327132 327220 327264 327032 5 327110 327228 327218 327010 4 327112 327236 327224 327012 3 327116 327236 327232 327016 2 327120 327244 327240 327020 1 (22 AWG) 327124 327252 327248 327024 1 (16 AWG) 327128 327260 327256 327028 Note: Part numbers cover black housings in Key 1 configuration. For other color and housing options utilize the Amphenol Alden connector configurator located at www.amphenolalden.com/configurator Options Include: Housing Color Options Black (std.) Gray Mating Key Options 2 Standard Keys, Proprietary Keys Available Panel-Mount Thickness Options Up to .125 Standard CONTACT TERMINATION OPTIONS CONTACT TERMINATION OPTIONS Receptacles & In-Line Plug PCB (Panel-Mount Receptacles only) Solder Cup (Available for All) Panel-Mount, Cut-Out Template .500 .625 Mounting Ring Stand off height 0.050 Footprint Tiered solder cups provide easy access to center positions. Request sales drawing for PCB .45 Canted cups facilitate quick and easy wire positioning. Mounting Templates Standard on 2-14 pole configurations ACCESSORIES Plug Soaking Cap Receptacle Dust Cover P/N 107976 P/N 112058-02 Note: accessories sold separately ASSEMBLY INSTRUCTIONS Receptacles: Plugs: AI-PL500FI-IR01 (1Pole, 16AWG) AI-PL500FI-P01 (1Pole, 16AWG) AI-PL500FI-IR02 (1Pole, 22AWG) AI-PL500FI-P02 (1Pole, 22AWG) AI-PL500FI-IR03 (2-8/10-14 Pole, 22/26AWG) AI-PL500FI-P03 (2-8/10-14 Pole, 22/26AWG) AI-PL500FI-PMR01 (1Pole, 16AWG) AI-PL500FI-PMR02 (1Pole, 22AWG) AI-PL500FI-PMR03 (2-8/10-14 Pole, 22/26AWG) Phone: 508-427-7000 For additional information about this, or any other Amphenol Alden product, please contact Receptacles Fax: 508-583-0164 2 an Amphenol Alden specialist today. www.amphenolalden.com