NUMBER TYPE PRODUCT SPECIFICATION GS-12-629 TITLE PAGE REVISION 1 of 13 C AUTHORIZED BY DATE Minitek 1.27MM Board to Board & Cable to Board Connector Andy Zhang Mar. 28 2013 CLASSIFICATION UNRESTRICTED Section 1: For the 20021122, 20021323, 20021444, 20021511, 20021512, 20021521, 20021611, 20021612, 20021621, 20021811, 20021813, 20021814, 20021822, 20021824, 20021831, 20021832, 20021833, 20021834 and 20021835 series parts. 1.0 GENERAL This specification defines the performance, tests and quality requirements for the 1.27MM Cable to Board (CTB) and Board to Board (BTB) plug and receptacle connectors. This document is composed of the following sections. 1. General 2. Scope 3. Applicable Documents 4. Requirements Design and Construction Material Finish 5. Test Methods and Requirements 6. Test Plan 7. Applicable Part Number and Product Drawing 8. Revision Record 2.0 SCOPE This specification is applicable to the termination characteristics of the 1.27MM cable to board and board to board connector family. 3.0 APPLICABLE DOCUMENTS 3.1 Military Standards: 3.1.1 MIL-STD-1344A: Test methods for electronic and electrical component parts. 3.1.2 MIL-STD-202: Test methods for electronic and electrical component parts. 3.2 Industry Specification/Other Standards: 3.2.1 UL-94: Tests for flammability of plastic materials. 4.0 REQUIREMENT 4.1 Design and Construction: Product shall be of the design, construction and physical dimensions specified on the applicable product drawing. 4.2 Materials 4.2.1 Housing: The insulators shall be rated flame retardant V-0 in accordance with UL-94. 4.2.2 Contact Copper Alloy, Selected plating over Nickel under-plated overall. Copyright FCI. Form E-3701 Revision C GS-01-029 PDS: Rev :C STATUS:Released Printed: May 08, 2013NUMBER TYPE PRODUCT SPECIFICATION GS-12-629 TITLE PAGE REVISION 2 of 13 C AUTHORIZED BY DATE Minitek 1.27MM Board to Board & Cable to Board Connector Andy Zhang Mar. 28 2013 CLASSIFICATION UNRESTRICTED 4.3 Ratings 4.3.1 Rated Voltage (Max.): 125 V AC. 4.3.2 Rated Current (Max.): 1A Max. per contact. 4.3.3 Operating Temperature Range: -40 to +105 .(Including temperature rise caused by application of current ) 4.4 Finish: The finish for applicable components shall be specified on the applicable product drawing 5.0 TEST METHODS AND REQUIREMENTS: TEST REQUIREMENTS AND PROCEDURES SUMMARY TEST DESCRIPTION REQUIREMENT PROCEDURED Examination of product Meets requirements of product Visual inspection drawing and Specification. No physical damage ELECTRICAL 30 m Max. (After Test 50 m Contact Resistance MIL-STD-1344A method 3002.1 Max.) 100 M Min. at 500 V DC / 2 Insulation Resistance MIL-STD-1344A method 3003.1 minute Dielectric Withstanding No breakdown at 500 V RMS MIL-STD-1344A method 3001.1 Voltage MECHANICAL Durability 100 Cycles MIL-STD-1344A method 2016 Meets requirements of product Vibration drawing and electrical MIL-STD-202 method 201 specification. Mating Force 220g Max. /Pin Speed 253mm/minute Unmating Force 20g Min. /Pin Speed 253mm/minute Male 300 g Min./Pin Contact Retention Force MIL-STD-1344A method 2007.1 Female 150 g Min./Pin ENVIRONMENTAL Meets requirements of product MIL-STD-1344A method 1002.2, Condition B Humidity(Steady state) drawing and electrical 90-95%, 40C, 96 hours specification. Meets requirements of product MIL-STD-1344A method 1003.1, Condition A Thermal Shock drawing and electrical -55C to 85C, 5 cycle specification. Meets requirements of product The connector housing shall be store at Dry Heat drawing and electrical temperature of 105 2C for 168 hours specification ICE-60998-1 Meets requirements of product The connector housing shall be store at Cold drawing and electrical temperature of -25 3C for 48 hours specification. Copyright FCI. Form E-3701 Revision C GS-01-029 PDS: Rev :C STATUS:Released Printed: May 08, 2013