PL-500SM-N SERIES Plastic Shell Auto-Coupling Connectors 14 pole capacity miniature circular connector for overmolding PL-500SM-N FEATURES Ideal for front-panel instrumentation and hand-held equipment, the compact and cost effective PL-500 Series is designed to meet the efficient packaging demands of portable electronic devices Packaging (intuitive, compact, configurable) Performance (for harsh environments) Pulse-Lok auto-latch / mating confirmation Water proof (IP-67 rated) Miniature .520 diameter circular shell Steam, EtO, & Gamma sterilizable Up to 14 contact positions Chemical resistant housing 14 standard color combinations Up to 5,000 mating cycles (with std. Multiple and proprietary keying options Contacts) Available as an overmolded cable assembly Factory terminated, overmolded Custom configurations available cable assemblies for enhanced flex and strain relief SPECIFICATIONS Mechanical Environmental Electrical (see below) Mating Cycles: 20K cycles max Mating Life: 5,000 cycles min. Retention Force: Operating Temp: -20C to +85C Contact Resistance: < 10 milliohms* Mated Connectors: 25 lbs. Minimum Moisture Resistance: to IP-67 (encapsulated) Material Cable to Connector: to 30 lbs. typical Sterilizable: gamma, EtO & Autoclave Connector Housing: Nylon 12 Backshell to Connector: 50 lbs. Chem. Resistance: common OR cleaning solvents Flex Reliefs: Thermoplastic Rubber Minimum * post conditioning Contacts: Brass / BeCu, Gold Plate per MIL-G-45204 TABLE A: STANDARD CONTACT CONFIGURATIONS & SPECIFICATIONS Contact Size Operating Operating Contact Number of Poles Max Wire Gauge Pin f (mm) Voltage max Current Max Resistance 14 0.5 28 300 V RMS .9 A < 14m ohms Up to 14 10 0.5 28 300 V RMS 1.2 A < 14m ohms 8 0.7 22 300 V RMS 1.8 A < 6m ohms contact positions 7 0.7 22 300 V RMS 2.1 A < 6m ohms 6 0.7 22 300 V RMS 2.1 A < 6m ohms 5 0.7 22 300 V RMS 2.4 A < 6m ohms 4 0.7 22 300 V RMS 2.4 A < 6m ohms 3 0.7 22 300 V RMS 3.0 A < 6m ohms 2 0.7 22 300 V RMS 3.0 A < 6m ohms 1 0.7 22 300 V RMS 3.0 A < 6m ohms 1 1.5 16 300 V RMS 7.0 A < 2m ohms Custom contact inserts are available. Consult factory. STANDARD HOUSING OPTIONS In-Line Receptacle Assembly Panel-Mount Receptacle Assembly In-Line Plug Assembly .520 f .520 f Mounts from back of panel to achievce an IP-67 seal - .320 typ 2.05 2.00 .625 f Shown with overmolded strain relief Panel thickness range = .063 to .125 Shown with Overmolded Strain Relief (Refer to PL Series Overmolding Guide) (Refer to PL Series Overmolding Guide) In-Line Plug Kit (for overmolding) In-Line Receptacle Kit (for overmolding) Panel-Mount Receptacle Rear Mount 1.43 1.02 1.35 Select this component from Table B Select this component from Table B Select this component from Table B Connector housings are illustrated in blue with gray couplers and backshells. Standard color is black on black. See our online configurator for color options at: www.aldenproducts.com/configurator * All dimensions shown in inches except where indicated Phone: 508-427-7000 For additional information about this, or any other Alden product, please Fax: 508-583-0164 contact an Amphenol Alden specialist today. www.amphenolalden.com 1 20012 Amphenol Alden Products Company Pulse-Lok is a trademark of Alden Products Company US Patents 5,067,909 , 5,167,522 , & International Patents apply. Other Patents Pending.PL-500SM-N SERIES Plastic Shell Auto-Coupling Connectors 14 Pole Capacity Miniature Circular Connectors TABLE B: STANDARD PART NUMBERS Number of In-Line Receptacle Panel-Mount Receptacle In-Line Plug Poles Solder Cup Solder Cup PCB Solder Cup 14 320679 320483 320875 320182 10 320651 320455 320847 320126 8 320637 320441 320833 320098 7 320630 320434 320826 320084 6 320623 320427 320819 320070 5 320616 320420 320812 320056 4 320609 320413 320805 320042 3 320602 320406 320798 320028 2 320595 320399 320791 320014 1 (.7mm Pin) 320588 320392 320784 320000 1 (1.5mm Pin) 321022 321008 N/A 320980 Note: Part numbers cover black housings in Key 1 configuration. For other color and housing options utilize the Alden connector configurator located www.aldenproducts.com/configurator Options Include: Housing Color Options Black, Gray, White, Blue, Red, Green, Yellow Mating Key Options 2 Standard Keys, Proprietary Keys Available Panel-Mount Thickness Options Up to .125 Standard CONTACT TERMINATION OPTIONS Termination Options Receptacles & In-Line Plug Panel-Mount, Cut-Out Template Solder Cup (available on all) PCB (Panel-Mount Receptacle only) stand off height.050 pin length .125 Request sales drawing SD-106999 for PCB mounting templates Tiered & Canted for ease of assembly ACCESSORIES Receptacle Dust Cover Assembly Instructions Al-PL500-01 Receptacle Al-PL500-02 Plug Available at: www.aldenproducts.com Alden P/N 107976 Receptacles CONNECTOR ASSEMBLY TOOLS Panel-Mount In-Line Receptacles Item Alden P/N Description Application 1 109099-77 Solder Nest Receptacle Core 2 2 390052 Insertion Tool Receptacle Core 224 IGA 1 3 390253 Insertion Tool Receptacle Core 224 IGA 1 Receptacle Housing 4 390032-77 Spanner Wrench Receptacle Mounting Ring 2 Receptacle Core In-Line Plug In-Line Plug Item Alden P/N Description Application 1 108077-77 Solder Nest/Assembly Plug Core 2 Base 1 1 Plug Core 2 Plug Housing Assembly Phone: 508-427-7000 For additional information about this, or any other Alden product, please Fax: 508-583-0164 contact an Amphenol Alden specialist today. www.amphenolalden.com 2 2012 Amphenol Alden Products Company Pulse-Lok is a trademark of Alden Products Company US Patents 5,067,909 , 5,167,522 , & International Patents apply. Other Patents Pending.