PL-500FI SERIES Plastic Shell Auto-Coupling Connectors 14 pole capacity miniature circular connector Field Installable PL-500FI FEATURES Ideal for front-panel instrumentation and hand-held equipment, the compact and cost effective PL-500FI Series is designed to meet the efficient packaging demands of portable electronic devices Packaging (intuitive, compact, configurable) Performance (for harsh environments) Pulse-Lok auto-latch / mating confirmation Water proof (IP-67 rated) Miniature .520 diameter circular shell Steam, EtO, & Gamma sterilizable Up to 14 contact positions Chemical resistant housing Assemble without special tools Up to 5,000 mating cycles (with std. Multiple and proprietary keying options Contacts) Available as an overmolded cable assembly Factory overmolded endure elevated Custom configurations available strain and flex conditions SPECIFICATIONS Mechanical Environmental Electrical (see below) Mating Cycles: 20K cycles max Mating Life: 5,000 cycles min. Retention Force: Operating Temp: -40C to +105C Contact Resistance: < 10 milliohms* Mated Connectors: 25 lbs. min. Moisture Resistance: to IP-67 (encapsulated) Material Cable to Connector: to 30 lbs. typical Sterilizable: gamma, EtO & Autoclave Connector Housing: Nylon 12 Backshell to Connector: 50 lbs. min. Chem. Resistance: common operating room Flex Reliefs: Thermoplastic Rubber Cable Diameter Range = .115 to .250 cleaning solvents Contacts: Brass / BeCu, * post conditioning Plating: Gold over Nickel TABLE A: STANDARD CONTACT CONFIGURATIONS & SPECIFICATIONS Contact Size Operating Operating Contact Number of Poles Max Wire Gauge Pin f (mm) Voltage max Current Max Resistance 14 0.5 28 300 V RMS .9 A < 14m ohms Up to 14 10 0.5 28 300 V RMS 1.2 A < 14m ohms 8 0.7 22 300 V RMS 1.8 A < 6m ohms contact positions 7 0.7 22 300 V RMS 2.1 A < 6m ohms 6 0.7 22 300 V RMS 2.1 A < 6m ohms 5 0.7 22 300 V RMS 2.4 A < 6m ohms 4 0.7 22 300 V RMS 2.4 A < 6m ohms 3 0.7 22 300 V RMS 3.0 A < 6m ohms 2 0.7 22 300 V RMS 3.0 A < 6m ohms 1 0.7 22 300 V RMS 3.0 A < 6m ohms 1 1.5 16 300 V RMS 7.0 A < 2m ohms Custom contact inserts are available. Consult factory. STANDARD HOUSING OPTIONS In-Line Receptacle Assembly Panel-Mount Receptacle Assembly In-Line Plug Assembly f .52 f .52 1.35 1.45 TYP. TYP. f .625 max .320 typ In-Line Plug Kit In-Line Receptacle Kit Panel-Mount Receptacle Kit Rear Receptacle Mount Plug Core Core Back Shell Back Shell Select this component from Table B Select this component from Table B Select this component from Table B Connector housings are illustrated in blue with gray couplers and backshells. Standard color is black on black. See our online configurator for color options at: www.amphenolalden.com/connectors-cable-assemblies/configure-connector * All dimensions shown in inches except where indicated Phone: 508-427-7000 For additional information about this, or any other Alden product, please Fax: 508-583-0164 contact an Amphenol Alden Products specialist today. www.amphenolalden.com 1 2012 Amphenol Alden Pulse-Lok is a trademark of Amphenol Alden Products Company US Patents 5,067,909 , 5,167,522 , & International Patents apply. Other Patents Pending.PL-500FI SERIES Plastic Shell Auto-Coupling Connectors 14 Pole Capacity Miniature Circular Field Installable Connectors TABLE B: STANDARD PART NUMBERS Number of In-Line Receptacle Panel-Mount Receptacle In-Line Plug Poles Solder Cup Solder Cup PCB Solder Cup 14 327104 327212 327204 327004 10 327100 327208 327200 327000 8 327140 327284 327280 327040 7 327136 327276 327272 327036 6 327132 327268 327264 327032 5 327110 327220 327218 327010 4 327112 327228 327224 327012 3 327116 327236 327232 327016 2 327120 327244 327240 327020 1 (.7mm Pin) 327124 327252 327248 327024 1 (1.5mm Pin) 327128 327260 327256 327028 Note: Part numbers cover black housings in Key 1 configuration. For other color and housing options utilize the Alden connector configurator located www.aldenproducts.com/configurator Options Include: Housing Color Options: Black, Gray Mating Key Options: 2 Standard Keys, Proprietary Keys Available Panel-Mount Thickness Options: Up to .125 Standard CONTACT TERMINATION OPTIONS Termination Options Receptacles & In-Line Plug Panel-Mount, Cut-Out Template Solder Cup (available on all) PCB (Panel-Mount Receptacle only) .625 Mounting .50 Ring Footprint stand off height.050 pin length .125 Request sales drawing SD-106999 .445 for PCB mounting templates Tiered & Canted for ease of assembly ACCESSORIES SALES DRAWINGS PLUG SOAKING CAP 112058-02 Drawing Connector Type 3272XXA Panel-Mount Receptacle, 10 Pole, PCB 3272XXB Panel-Mount Receptacle, 14 Pole, PCB 3272XXC Panel-Mount Receptacle, 10 Pole, Solder Cup 3272XXD Panel-Mount Receptacle, 14 Pole, Solder Cup 3271XXA Inline Receptacle, 10 Pole, Solder Cup 3271XXB Inline Receptacle, 14 Pole, Solder Cup 3270XXA Inline Plug, 10 Pole, Solder Cup 3270XXB Inline Plug, 14 Pole, Solder Cup RECEPTACLE DUST COVER 107976 CONNECTOR ASSEMBLY INSTRUCTIONS Al-PL500FI-01 Panel-Mount Receptacle Al-PL500FI-02 Inline Receptacle Al-PL500FI-03 Inline Plug Available at: www.amphenolalden.com/connectors-cable-assemblies/configure-connector Phone: 508-427-7000 For additional information about this, or any other Alden product, please Fax: 508-583-0164 contact an Amphenol Alden Products specialist today. www.amphenolalden.com 2 2012 Amphenol Alden Pulse-Lok is a trademark of Amphenol Alden Products Company US Patents 5,067,909 , 5,167,522 , & International Patents apply. Other Patents Pending.