PL-900RG-N SERIES Plastic Shell Auto-Coupling Connectors 52 pole capacity disposable receptacle and support interconnects PL-900RG-N FEATURES Specifically designed for electro-surgical catheter applications, the compact and cost effective PL-900 Series offers more features, contacts, and termination options than the competition. Packaging (intuitive, compact, configurable) Performance (for harsh environments) Water proof (IP-67 rated) Pulse-Lok auto-latch / mating confirmation Sterilizable mechanism confirms continuity in critical surgical Chemical resistant housing applications Up to 5,000 mating cycles (with std.Contacts) 14 standard color combinations Factory terminated, overmolded cable Proprietary keying protects your single-use from being copied, or mated with the wrong connector assemblies for enhanced flex and stain relief Custom configurations including passive and active devices for coding or limiting catheter usage SPECIFICATIONS Mechanical Environmental Electrical (see below) Mating Cycles: 5K cycles max Operating Temp: -20C to +85C** Mating Life: 5,000 cycles min. Retention Force: Moisture Resistance: to IP-67 (encapsulated) Contact Resistance: < 10 milliohms* Mated Connectors: 50 lbs. Minimum Sterilizable: gamma, EtO & Autoclave Cable to Connector: 50 lbs. Typical Chem. Resistance: common OR cleaning solvents Material Backshell to Connector: 50 lbs. Minimum Shelf Life: 3 years (min) Disposable Connectors Connector Housing: Thermoplastic Flex Reliefs: Thermoplastic Rubber Contacts/Sockets: Brass / BeCu, * post conditioning Gold Plate per MIL-G-45204 **Dependent on overmold material Reusable Socket = 30-45 Gold over 50- 200 Nickel strike Disposable Pin = 10-30 Gold over 50-200 Nickel strike TABLE A: STANDARD CONTACT CONFIGURATIONS & SPECFICATIONS Contact Number of Contact Size Max Wire Operating Operating Current Resistance Poles Gauge Voltage Max Max (A) Pin (mm) (ohms) Up to 52 Contact 52 0.5 26 300 V RMS 2.0 <10m Positions 41 0.5 22 300 V RMS 2.0 <10m 35 0.5 26 300 V RMS 2.0 <10m 28 0.5 26 300 V RMS 2.0 <10m 24 0.5 26 300 V RMS 2.0 <10m 24 0.7 22 300 V RMS 5.0 <10m 17 0.5 26 300 V RMS 2.0 <10m 15 0.7 22 300 V RMS 5.0 <10m 11 0.5 26 300 V RMS 2.0 <10m 9 0.7 22 300 V RMS 5.0 <10m Custom contact inserts are available. Consult factory. STANDARD HOUSING OPTIONS Rear Panel-Mount Disposable Receptacle Assembly In-Line Plug Assembly Receptacle Assembly .90 .90 0.460 typ. 2.37 1.00 2.90 Shown with optional backshell (See Table C) Showm with Overmolded Strain Relief Disposable Receptacle In-Line Plug Kit (For overmolding) 1.02 2.00 1.05 Panel Thickness Range = 0.063 to 0.250 Select this component from Table B Select this component from Table B Select this component from Table B Connector housings and backshells are illustrated in light gray with gray couplers. Standard color is black on black. *All dimensions shown in inches except where indicated Phone: 508-427-7000 For additional information about this, or any other Amphenol Alden product, please contact Fax: 508-583-0164 1 an Amphenol Alden specialist today. www.amphenolalden.com PL-900RG-N SERIES Plascti Shell Auto-Coupling Connectors 52 pole capacity disposable receptacle and support interconnects TABLE B: STANDARD PART NUMBERS Number of Rear Panel-Mount Disposable Receptacle In-Line Plug Poles Receptacle Solder Cup PCB Solder Cup PCB Solder Cup 341406 342946 342512 342519 341252 52 341392 342932 342484 342491 341224 41 35 341378 342918 342456 342463 341196 28 341364 342904 342428 342435 341168 24 (26AWG) 341350 342890 342541 342407 341140 24 (22AWG) 341336 342876 342372 342379 341112 17 341322 342862 342344 342351 341084 15 341308 342848 342316 342323 341056 11 341294 342834 342288 342295 341028 9 341280 342820 342260 342267 341000 Note: Part numbers cover black housings in Key 1 configuration. For other color and housing options utilize the Amphenol Alden connector configurator located at www.amphenolalden.com/configurator Options Include: Indicator Color Options Black (std.), Gray, White, Blue, Red, Green, Yellow Mating Key Options 2 Standard Keys, Proprietary Keys Available Panel-Mount Thickness Options .125 (std.), .063, .187,.250 CONTACT TERMINATION OPTIONS Termination Styles Panel 1 Pin Length & Application Pin Length & Applications Flex Circuits Benefits Facilitates the automated internal application of passive and active electronic components Facilitates the introduction of automated mass termination techniques. These termination 0.040 methods are extremely cost effective when terminating 52 pole connectors Intended for termination to flex circuit Intended for mounting on rigid PC Board Panel 2 PCB (Panel-Mount Receptacles only) Panel-Mount, Cut-Out Template .880 Features & Benefits Features & Benefits 1.05 mounting Tiered solder cups Available in most pole counts Flange Footprint from 9 to 52 Poles provide easy access to PCB stand-offs ensure proper center positions. Canted positioning cups facilitate quick and Convenient packaging high easy wire positioning. temperature contect cures may Standard on 9-52 pole be soldered to PCB and snapped configurations .775 into panel-mounted receptacle Request Sales Drawing for PCB housing later Applies to Rear Panel-Mount mounting template Receptacles ASSEMBLY INSTRUCTIONS Receptacles: Plugs: AI-PL900RGN-P01 (3Pole, 12AWG) AI-PL900RGN-ILR01 (3Pole, 12AWG) AI-PL900RGN-P02 (7Pole, 16AWG) AI-PL900RGN-ILR02 (7Pole, 16AWG) AI-PL900RGN-P03 (10-14Pole, 22AWG) AI-PL900RGN-ILR03 (10-14Pole, 22AWG) AI-PL900RGN-RPM01 (3Pole, 12AWG) AI-PL900RGN-RPM02 (7Pole, 16AWG) AI-PL900RGN-RPM03 (10-14Pole, 22AWG) Phone: 508-427-7000 For additional information about this, or any other Amphenol Alden product, please contact Fax: 508-583-0164 2 an Amphenol Alden specialist today. www.amphenolalden.com