PL-1200RG-N SERIES Plastic Shell Auto-Coupling Connectors 78 pole capacity interconnect system PL-1200RG-N FEATURES Custom configurations available Specifically designed for electro-surgical including passive and active devices catheter applications, the compact and for coding or limiting catheter usage cost effective PL-1200 Series offers more features, contacts, and termination Performance (for harsh environments) options than the competition. Water proof Packaging (intuitive, compact, configurable) Sterilizable Pulse-Lok auto-latch / quick release Chemical resistant housing mechanism confirms continuity in critical Up to 5,000 mating cycles (with std. surgical applications Contacts) 14 standard color combinations Factory terminated, overmolded Proprietary keying protects your single-use cable assemblies for enhanced flex from being copied, or mated with the wrong and strain relief connector SPECIFICATIONS Electrical (See Table A) Mechanical Environmental Mating Life: 5,000 cycles min. Mating Cycles: 20K cycles max Operating Temp: -20C to +105C Contact Resistance: < 10 milliohms* Retention Force (axial): Moisture Resistance: to IP-67 Mated Connectors: 50 lbs. Minimum Sterilizable: steam, gamma & EtO Material Cable to Connector: to 50 lbs. typical Chem. Resistance: common OR cleaning Connector Housing: Thermoplastic Backshell to Connector: 50 lbs. solvents Flex Reliefs: Thermoplastic Rubber Minimum Contacts: Pins = Brass, Sockets = Bronze Alloy Gold Plate per MIL-G-45204C * post conditioning Reusable Socket = 30 - 45 Gold over 50 200 Nickel strike Disposable Pin = 10 - 30 Gold over 50 200 Nickel strike TABLE A: AVAILABLE CONTACT CONFIGURATIONS & SPECIFICATIONS Contact Size Operating Operating Contact Up to 78 Number of Poles Max Wire Gauge Pin (mm) Voltage max Current Max Resistance contact positions 78 0.5 26 300 V RMS 1.0 A < 10m ohms 59 0.5 26 300 V RMS 1.0 A < 10m ohms 52 0.5 26 300 V RMS 1.0 A < 10m ohms 45 0.5 26 300 V RMS 1.0 A < 10m ohms 26 0.5 26 300 V RMS 1.0 A < 10m ohms 19 0.5 26 300 V RMS 1.0 A < 10m ohms STANDARD HOUSING OPTIONS Disposable Receptacle Assembly Panel-Mount Receptacle Assembly In-Line Plug Assembly 1.15 1.15 Mounts from back of panel to achievce an IP-67 seal 3.0 .290 typ - - .460 typ 3.30 Shown with optional backshell (See Table C) Panel thickness range = .063 to .250 Shown with Overmolded Strain Relief (Refer to PL Series Overmolding Guide) Disposable Receptacle Panel-Mount Receptacle In-Line Plug (for overmolding) 1.00 2.0 1.00 Select this component from Table B Select this component from Table B Select this component from Table B Connector housings are illustrated in blue with gray couplers and backshells. Standard color is black on black. See our online configurator for color options at: www.aldenproducts.com/configurator * All dimensions shown in inches. Phone: 508-427-7000 For additional information about this, or any other Alden product, please Fax: 508-583-0164 contact an Alden Products specialist today. www.aldenproducts.com 11 2007 Amphenol Alden Products Company Pulse-Lok is a trademark of Amphenol Alden Products Company US Patents 5,067,909 , 5,167,522 , & International Patents apply. Other Patents Pending. PL-1200RG-N SERIES Plastic Shell Auto-Coupling Connectors 78 Pole Capacity Interconnect System TABLE B: STANDARD PART NUMBERS Number of Disposable Receptacle Panel-Mount Receptacle In-Line Plug Poles Solder Cup Solder Cup PCB Solder Cup See Panel 3 See Panel 3 See Panel 2 See Panel 3 78 380588 380700 380707 380000 59 380532 380728 380735 380056 52 380504 380756 380763 380112 45 380476 380784 380791 380168 26 380448 380812 380819 380224 19 380420 380840 380847 380280 Note: Part numbers cover black housings in Key 1 configuration. For other color and housing options utilize the Alden connector configurator located www.aldenproducts.com/configurator Options Include: Housing Color Options Black, Gray, White, Blue, Red, Green, Yellow Mating Key Options 2 Standard Keys, Proprietary Keys Available Panel-Mount Thickness Options Up to .187 Standard CONTACT TERMINATION OPTIONS PCB Terminations Disposable Receptacle & In-Line Plug Panel 1 Pin Length & Application Flex Circuit Mounting Template Flex Circuit Benefits Facilitates the automated internal application of passive and active electronic components. Facilitates the introduction of automated mass termination techniques. These termination methods are extremely .040 cost effective when terminating 78 Intended for termination to flex circuit pole connectors. PCB Terminations Panel-Mount Receptacle Panel 2 Pin Length & Application Panel-Mount, Cut-Out Template Printed Circuit Board Mounting Template .125 .050 Intended for mounting on rigid PC Board Solder Terminations Disposable Receptacle, PanelMount Receptacle, & In-Line Plug Panel 3 Solder Cup Tiered solder cups provide easy access to center positions Canted cups facilitate quick and easy wire positioning For wires up to 26 AWG Phone: 508-427-7000 For additional information about this, or any other Alden product, please Fax: 508-583-0164 contact an Alden Products specialist today. www.aldenproducts.com 22 2007 Amphenol Alden Products Company Pulse-Lok is a trademark of Amphenol Alden Products Company US Patents 5,067,909 , 5,167,522 , & International Patents apply. Other Patents Pending.