5034CR Amphenol

Enabling the Electronics Revolution PT-10 / PTC-10 10-mm carbon / cermet through-hole potentiometer The PT-10 and PTC-10 potentiometers offer control where frequent adjustment is required. The shaftless design allows for employment of different engagement mechanisms, such as a customized shaft, a motor control or a human interface adjustment. This potentiometer can also control variable outputs including frequency, change in motor speed or volume. KEY FEATURES Excellent performance (up to 3% linearity) Carbon or cermet resistive element Up to 16 mechanical detents for tactile feedback Up to 100.000 life cycles IP54 protection Magazine packaging for automatic insertion available Polyester / Alumina substrate Wiper positioned at initial, 50% or fully clockwise Loose and assembled shaft and knobs Linear, logarithmic and antilogarithmic tapers Self extinguishable plastic (UL 94V-0) available SPDT switch and low torque version available U p to 100k IP 5 4 On request U p to 1 6 E xtra -lo ng F lame de te nts life re tardant Embossed tape packaging ELECTRICAL SPECIFICATIONS APPLICATIONS Appliance program selection PT-10 PTC-10 Thermostat adjustment Taper Lin, Log, Alog Timer and control relays Range of values (Decad. 1.0 - 2.0 - 2.2 - 2.5 - 4.7 - 5.0) Consumer electronics Lin 100 Rn 5M Log, Alog 1K Rn 5M Power tool controls Tolerance Test and measurement 100 Rn 1M 20% equipment 1M Rn 5M 30% Max. Voltage Lin 200 VDC Log, Alog 100 VDC Nominal power 50C (122F) 70C (158F) Lin 0.15 W 0.33 W Log, Alog 0.07 W 0.17 W Residual resistance 0.5% Rn (5 min.) Equivalent noise 3% Rn (3 min.) resistance -25C to +70C -40C to +90C Operating temperature (-13F to + 158F) (-40F to + 194F) 1 Others available on request 2 Up to 85C depending on application. 3 +120C/+248F upon request Page 1 of 10 www.piher.netPT-10 / PTC-10 10-mm carbon / cermet through-hole potentiometer MECHANICAL SPECIFICATIONS PT-10 PTC-10 Mechanical rotation angle 235 5 Electrical rotation angle 220 20 Torque Rotational 0.4 to 2 Ncm (0.6 to 2.7 in-oz) Stop > 5 Ncm (>7 in-oz) Push-pull force over the rotor > 49N Life Up to 100k cycles Up to 10k cycles 1 Endless rotation available: ST-10 2 Others check availability ENV I RONM ENTA L T EST I NG P T - 1 0 P TC - 1 0 Te st m e t h o d (CE I 393-1) R ( % ) - P i h e r t y p i cal te st re s u l t s R ( % ) - P i h e r t y p i cal te st re s u l t s Electrical life 1.000h at 50C 0.15W 5% n/a 1.000h at 70C 0.33W n/a 2% Mechanical life 1000 cycles at 10 to 15 cpm 3 % (Rn < 1M ) 2% Temperature 25C +70C 300 ppm/C (Rn < 100K) n/a coefficient -40C +90C n/a 100 ppm/C Thermal cycling 16h at 85C and 2h at -25C 2.5% n/a 16h at 90C and 2h at -40C n/a 2% Damp heat 500h at 40C and 95% relative 5% 2% humidity (RH) Vibration 2h each plane at 10Hz - 55Hz 2% 2% Storage 6 month at 23C 2C and 50% RH 2.5% 2% Out of range values may not comply with these results. Standard test conditions: temperature:23C 2C and 45% to 70% RH RECOMMENDED CONNECTIONS Recommended connection circuit for a position sensor or control application (voltage divider circuit electronic design). V CC E S R A D A R C L R 1 0 0 x R L POWER RATING CURVE PT-10 PTC-10 W (%) W (%) 100 % 100 % 40 % 40 % C 50C 70C 70 90 Page 2 of 10 www.piher.net