5210NE Amphenol

SMD PS-15 & PSX-15 potentiometer FEATURES Specifically designed for leadfree reflow soldering processes (excellent performance). 15mm IP54 protection according to IEC 60529. Carbon resistive element. Full traceability. Self extinguishable plastic UL 94V-0 and moisture sensitivity level 1 (PS-15). Embossed tape according to IEC 60286-3:2007 Wiper positioned at initial, 50% or fully clockwise. Also upon request: Mechanical detents. Locating pins for accurate PCB positioning. Low torque versions. Log/alog and custom tapers. Shafts and knobs. MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS Value*: 1k to 1M Mechanical rotation angle: 265 5 Tolerance*: 30% Electrical rotation angle: 240 20 Taper*: Linear Torque: 0.5 to 2.5 Ncm. (0.7 to 3.4 in-oz) Nominal Power: 0.25W 50C (122F) Stop torque: > 10 Ncm. ( >14 in-oz) Operating temperature: PSX-15: 25C + 70C PS-15: 40C + 85C Mechanical life*: up to 10K cycles Residual resistance: Equivalent Noise Resistance: * Others upon request HOW TO ORDER STANDARD OPTIONAL EXTRAS PSX15 T V50 103 A 3030 Series Mounting Taper Life Detents Wiper position Packaging PSX15 V50 PAI A = Linear E = Long life PS15 PM = 50% B = Bulk PAM V60 PF = Final (See note 3) PAF (See note 2) P1I P1F Torque Rotors Value P02 . Tolerance = Standard . C . 102 = 1k + 3030 = 30% L = Low torque F P38 G (See note 4) N 105 = 1M R T (See note 1) NOTES: (1) Rotors C and F not available for PSX-15. (2) V50: without locating pins. V60: with locating pins. (3) E option for PSX-15 only. Higher life available upon request for both models to be studied case by case. (4) www.piher.net 47................................................................... 4.05 3.05 42.5 42.5 HOW TO ORDER CUSTOM DRAWING STANDARD OPTIONS PSX-15 PS-15 Detents ................................................................... None None Black Rotor colour ......................................................... Grey (Max. 16 digits) PS(X)-15 TV50 + DRAWING NUMBER Black Housing colour ...................................................... Grey This way of ordering should be used for options which are not included Wiper position ...................................................... Initial Initial in theHow to orde standard and optional extras. Standard Torque ................................................................... Standard ............................................................... Reel Packaging Reel Mechanical Life ........................................................ 1K cycles 10K cycles ROTORS (collector side view) Wipers positioned at initial Wiper Wiper position position N = G = Removable shaft Removable shaft or thumbwheel or thumbwheel Wipers positioned at 50% 4.05 3.35 4.02 1.2 4.4 Rotor C Rotor F Rotor R Rotor T DIMENSIONS (V50 version) 2.5 15 3 6.5 4.05 S E (final) (wiper) S A E (initial) A 2.5 6.5 4.5 4.5 4.5 4.5 DIMENSIONS (V60 version - with centering pins) 13.7 15 2.5 6.5 3 1.20 (x2) 6.5 2.5 4.05 4.5 4.5 4.5 4.5 www.piher.net 48 23 54 4.05 3.05 3.05 2.25 2.25 16 3.35 16 3.05 7.5 13.8 3.52 7.5 7.15 13.8 7.15 3.05 3.5 3.5