TYPE NUMBER PRODUCT SPECIFICATION BUS-12-082 TITLE PAGE REVISION Quickie Connector System 1 of 20 F AUTHORIZED BY DATE 31 Jul 06 M.Barrios CLASSIFICATION UNRESTRICTED 1.0 GENERAL Scope TM This specification covers the insulation piercing Quickie Connector designed for printed wiring board-to- flat cable (round conductor) interconnection in low power applications. In all applications the mated system (header to receptacle) plating should be gold to gold or tin to tin. The specification is composed of the following sections. Paragraph Title Page 1.0 GENERAL 1 2.0 APPLICABLE DOCUMENTS 1 3.0 REQUIREMENTS 2 3.1 Qualification 2 3.2 Material 3 3.3 Finish 3 3.4 Design and Construction 7 3.5 Electrical Characteristics 9 3.6 Mechanical Characteristics 11 3.7 Environmental Conditions 13 4.0 QUALITY ASSURANCE PROVISIONS 17 4.1 Equipment Calibration 17 4.2 Inspection Conditions 17 4.3 Qualification Inspection 17 4.4 Quality Conformance Inspection 18 4.5 Acceptance Inspection 20 2.0 APPLICABLE DOCUMENTS The following documents, of the issue in effect on the date of the latest revision of this specification, shall form a part of this specification to the extent specified herein. SPECIFICATIONS Military MIL-M-245l9 Molding Plastics, Polyester, Thermoplastic MIL-G-45204 Gold Plating, Electrodeposited MIL-G-45662 Calibration System Requirement MIL-P-55110 Printed Wiring Boards Copyright FCI Form E-3334 GS-01-001 Rev E PDM: Rev:F Released .STATUS: Printed: Nov 28, 2010TYPE NUMBER PRODUCT SPECIFICATION BUS-12-082 TITLE PAGE REVISION Quickie Connector System 2 of 20 F AUTHORIZED BY DATE 31 Jul 06 M.Barrios CLASSIFICATION UNRESTRICTED Federal QQ-N-290 Nickel Plating (Electrodeposited) QQ-W-343 Wire, Electrical and Non-Electrical, Copper (Uninsulated) QQ-B-750 Bronze, Phosphor Bar, Plate, Rod, Sheet Strip, Flat Wire, and Structural and Special Shaped Sections QQ-S-763 Steel Bars, Shapes, and Forgings, Corrosion-Resisting. QQ-C-533 Be - Cu STANDARDS Military MIL-STD-l05 Sampling Procedures and Tables for Inspection by Attributes MIL-STD-202 Test Methods for Electronic and Electrical Component Parts MIL-STD-275 Printed Wiring Board for Electronic Equipment MIL-STD-l344 Test Methods for Electrical Connectors Industry Specifications/Standards UL-94 Tests for Flammability of Plastic Materials FCI Test Specifications BUS-12-00l Round Conductor Flat Flexible Cable 3.0 REQUIREMENTS 3.1 Qualification Connectors furnished under this specification shall be products capable of meeting the qualification test requirements specified herein. 3.2 Material The material for each part shall be as specified herein, or equivalent. Substitute material shall meet the performance requirements of this specification. 3.2.1 Contact. Both the header and receptacle contact shall be full-hard phosphor bronze in accordance with QQ-B-750, Composition A. 3.2.2 Latch. The standard Quickie shall have a plastic molded-in latch. Copyright FCI Form E-3334 GS-01-001 Rev E PDM: Rev:F Released .STATUS: Printed: Nov 28, 2010