NUMBER TYPE PRODUCT SPECIFICATION GS-12-547 TITLE PAGE REVISION 0.8mm BergStak Product Specification 1 of 8 F AUTHORIZED BY DATE Jim Meng 20 Apr 15 CLASSIFICATION UNRESTRICTED 1.0 OBJECTIVE This specification defines the performance, test, quality and reliability requirements of 0.8mm pitch BergStak product. 2.0 SCOPE This specification is applicable to the termination characteristics of 0.8mm pitch BergStak family of products (receptacle with plug mating height 5.0mm to 20.0mm), with 30u Palladium-Nickel plating and 8u Min Au plating, which provides electrical connections between parallel mounted boards. 3.0 GENERAL This document is composed of the following sections: PARAGRAPH TITLE 1.0 OBJECTIVE 2.0 SCOPE 3.0 GENERAL 4.0 APPLICABLE DOCUMENTS 4.1 Standards and Specifications 5.0 REQUIREMENTS 5.1 Qualification 5.2 Material 5.3 Finish 5.4 Design and Construction 5.5 Rating 6.0 PERFORMANCE 6.1 Performance 6.2 Test Methods 6.3 Test Sequence 4.0 APPLICABLE DOCUMENTS 4.1 Standards and Specifications 4.1.1 MIL-STD-202: Test methods for electronic and electrical component parts. 4.1.2 MIL-STD-1344: Test methods for electronic connectors. 4.1.3 EIA 364: Electronic connector/socket test procedures including environmental classifications. 4.1.4 QQ-N-290: Nickel plating. 4.1.5 QQ-N-533: BeCu strip. 4.1.6 MIL-G-45204: Gold plating electrodeposited 4.1.7 MIL-C-45662: Calibration system requirements Copyright FCI Form E-3334 GS-01-001 Rev F PDS: Rev :F STATUS:Released Printed: Apr 22, 2015NUMBER TYPE PRODUCT SPECIFICATION GS-12-547 TITLE PAGE REVISION 0.8mm BergStak Product Specification 2 of 8 F AUTHORIZED BY DATE Jim Meng 20 Apr 15 CLASSIFICATION UNRESTRICTED 5.0 REQUIREMENTS 5.1 Qualification Connectors furnished under this specification shall be capable of meeting the qualification test requirements specified herein. 5.2 Material 5.2.1 Housing: All housing materials shall be high temperature plastic, rated flame retardant 94V-0 in accordance with UL-94. 5.2.2 Receptacle Terminal: Nickel Copper 5.2.3 Plug Terminal: Brass. 5.2.4 Metal Cap: Stainless steel. 5.2.5 Hold Down: Brass. 5.3 Finish The finish for applicable components shall be specified in product drawings with plating area, plating material and plating thickness. 5.4 The thickness of the PCB solder paste Below data is FCI recommended dimension, For some customers process are different (such as, PCB thickness, solder temperature, solder paste type, etc.), customer can according to the actual application environment adjust the solder paste thickness. 5.4.1 The position less than 120pin,recommend using solder paste thickness 0.15mm Min. 5.4.2 The position greater than or equal to 120pin,recommend using solder paste thickness 0.18mm Min. 5.5 Design and Construction The connector shall be a multi-piece assembly having two rows of contacts with surface mount solder- tail terminations for installation on printed wiring board. 5.6 Rating Voltage Rating 100V AC Current Rating 0.8A Max. Temperature Rating -40C ~ 125C 6.0 PERFORMANCE Unless otherwise specified, the performance of connectors given in the attached list shall satisfy the values specified in Table 6.1. The performance test shall follow the test method and the test sequence given in Table 6.2 & 6.3 under the environmental conditions listed below. All connectors to be tested shall be free of defects such as burr, flaw, void, blister etc. which will affect the life and application of connectors. Temperature ---------- 15C ~ 35C Humidity ---------------- 25% ~ 85% Pressure --------------- 86 ~ 106KPa Copyright FCI Form E-3334 GS-01-001 Rev F PDS: Rev :F STATUS:Released Printed: Apr 22, 2015