62IP-56T08-03PN Amphenol

62IP / 162IP Industrial Plastic IP Series Connectors The Industrial Plastic (IP) range of miniature bayonet locking connectors, has both 62IP as solder non-removable contacts, and 162IP as crimp removable contacts. These are fully interchangeable with Amphenol Ltd 62 Series connectors and accessories. The designs are based on BS 9522 F0017. The shells are moulded from Thermoplastic, as are the applicable panel nuts, coupling nuts and accessories. This gives a smooth, low lustre black finish that, once moulded, does not require any plating or further processes. Insert material is neoprene rubber and the contacts are machined and gold plated, the same as the GB range of connectors for both 62 and 162. Other key benefits are: Salt Spray 500 hours Rated to IP67 500 mating cycles minimum Contact resistance 5 milliohms maximum Insulation resistance 5000 Megohms 500VDC minimum Contact Rating: - 7.5A for Size 20 contacts - 13A for Size 16 contacts o o Temperature range 20 C to +70 C 2 62IP / 162IP Available Inserts 62IP Available Inserts 08-04 08-02 08-03 08-33 4 x 20 2 x 20 3 x 20 3 x 20 10-02 10-06 10-07 2 x 16 6 x 20 7 x 20 12-03 12-10 3 x 16 10 x 20 162IP Available Inserts 08-33 08-98 3 x 20 3 x 20 10-02 10-06 10-07 2 x 16 6 x 20 7 x 20 12-03 12-10 3 x 16 10 x 20 Contact Rating: 7.5A for Size 20 Contacts 13A for Size 16 Contacts 3