TYPE NUMBER
PRODUCT SPECIFICATION BUS-12-082
TITLE PAGE REVISION
Quickie Connector System 1 of 20 F
AUTHORIZED BY DATE
31 Jul 06
M.Barrios
CLASSIFICATION
UNRESTRICTED
1.0 GENERAL
Scope
TM
This specification covers the insulation piercing Quickie Connector designed for printed wiring board-to-
flat cable (round conductor) interconnection in low power applications. In all applications the mated system
(header to receptacle) plating should be gold to gold or tin to tin. The specification is composed of the
following sections.
Paragraph Title Page
1.0 GENERAL 1
2.0 APPLICABLE DOCUMENTS 1
3.0 REQUIREMENTS 2
3.1 Qualification 2
3.2 Material 3
3.3 Finish 3
3.4 Design and Construction 7
3.5 Electrical Characteristics 9
3.6 Mechanical Characteristics 11
3.7 Environmental Conditions 13
4.0 QUALITY ASSURANCE PROVISIONS 17
4.1 Equipment Calibration 17
4.2 Inspection Conditions 17
4.3 Qualification Inspection 17
4.4 Quality Conformance Inspection 18
4.5 Acceptance Inspection 20
2.0 APPLICABLE DOCUMENTS
The following documents, of the issue in effect on the date of the latest revision of this specification, shall
form a part of this specification to the extent specified herein.
SPECIFICATIONS
Military
MIL-M-245l9 Molding Plastics, Polyester, Thermoplastic
MIL-G-45204 Gold Plating, Electrodeposited
MIL-G-45662 Calibration System Requirement
MIL-P-55110 Printed Wiring Boards
Copyright FCI
Form E-3334 GS-01-001
Rev E
PDM: Rev:F Released .STATUS: Printed: Nov 28, 2010TYPE NUMBER
PRODUCT SPECIFICATION BUS-12-082
TITLE PAGE REVISION
Quickie Connector System 2 of 20 F
AUTHORIZED BY DATE
31 Jul 06
M.Barrios
CLASSIFICATION
UNRESTRICTED
Federal
QQ-N-290 Nickel Plating (Electrodeposited)
QQ-W-343 Wire, Electrical and Non-Electrical, Copper (Uninsulated)
QQ-B-750 Bronze, Phosphor; Bar, Plate, Rod, Sheet Strip, Flat Wire, and Structural and Special
Shaped Sections
QQ-S-763 Steel Bars, Shapes, and Forgings, Corrosion-Resisting.
QQ-C-533 Be - Cu
STANDARDS
Military
MIL-STD-l05 Sampling Procedures and Tables for Inspection by Attributes
MIL-STD-202 Test Methods for Electronic and Electrical Component Parts
MIL-STD-275 Printed Wiring Board for Electronic Equipment
MIL-STD-l344 Test Methods for Electrical Connectors
Industry Specifications/Standards
UL-94 Tests for Flammability of Plastic Materials
FCI Test Specifications
BUS-12-00l Round Conductor Flat Flexible Cable
3.0 REQUIREMENTS
3.1 Qualification
Connectors furnished under this specification shall be products capable of meeting the qualification
test requirements specified herein.
3.2 Material
The material for each part shall be as specified herein, or equivalent. Substitute material shall meet
the performance requirements of this specification.
3.2.1 Contact. Both the header and receptacle contact shall be full-hard phosphor bronze in
accordance with QQ-B-750, Composition A.
3.2.2 Latch. The standard Quickie shall have a plastic molded-in latch.
Copyright FCI
Form E-3334 GS-01-001
Rev E
PDM: Rev:F Released .STATUS: Printed: Nov 28, 2010