NUMBER TYPE BUS-12-075 PRODUCT SPECIFICATION TITLE PAGE REVISION Friction Latch Header Connector 1 of 8 E AUTHORIZED BY DATE 01 July 15 J.ZHOU CLASSIFICATION UNRESTRICTED 1.0 GENERAL 1.1 Scope This specification covers the Friction Latch Header Connector, a header designed for use in low- power applications requiring a printed wiring board mounted straight or right angle disconnect. The header provides only the male half of the interconnection, using 0.025 square female Mini Latch Housing connector to complete the connection. This product can be Lead Free and meets the requirements of the European union Directive of Restrictions for Hazardous Substances (directive 2002/95/EC. The friction latch, provided by long plastic ledges, act as locking system with female housing to prevent unmating, due to vibration in operation. The specification is composed of the following sections: Paragraph Title Page 1.0 GENERAL 1 1.1 Scope 1 1.2 Type 1 2.0 APPLICABLE DOCUMENTS 2 3.0 REQUIREMENTS 2 3.1 Qualification 2 3.2 Material 2 3.3 Finish 3 3.4 Design and Construction 3 3.5 Electrical Characteristics 4 3.6 Mechanical Characteristics 4 3.7 Environmental Conditions 5 3.8 Solderability 5 4.0 QUALITY ASSURANCE PROVISIONS 5 4.1 Equipment Calibration 4.2 Inspection Conditions 4.3 Qualification Inspection 4.4 Acceptance 1.2 Type The connector shall be available in one of the following type classifications, as limited by the appropriate product drawing. Type Plating I Gold Flash II 15 microinches Gold on contact and tail, optional 78~295 microinches tin on tail III 30 microinches Gold on contact and tail, optional 78~295 microinches tin on tail IV 50 microinches Gold on contact and tail, optional 78~295 microinches tin on tail V Tin-Lead VI 15 microinches Palladium Alloy on contact and tail, optional 78~295 microinches tin on tail VII 30 microinches Palladium Alloy on contact and tail, optional 78~295 microinches tin on tail Copyright FCI Form E-3334 GS-01-001 Rev E PDS: Rev :E STATUS:Released Printed: Jul 09, 2015NUMBER TYPE BUS-12-075 PRODUCT SPECIFICATION TITLE PAGE REVISION Friction Latch Header Connector 2 of 8 E AUTHORIZED BY DATE 01 July 15 J.ZHOU CLASSIFICATION UNRESTRICTED 2.0 APPLICABLE DOCUMENTS The following documents, of the issue in effect on the date of the latest revision of this specification, shall form a part of this specification to the extent specified herein. Military Specifications MIL-F-14256 Flux, Soldering, Liquid (Rosin Base), Activated MIL-G-45204 Gold Plating, Electrodeposited MIL-P-45209 Palladium Plating, Electrodeposited MIL-P-55110 Printed Wiring Boards MIL-P-81728 Plating, Tin-Lead (Electrodeposited) Federal Specifications QQ-N-290 Nickel Plating (Electrodeposited) QQ-W-343 Wire, Electrical and Nonelectrical, Copper (uninsulated) QQ-S-571 Solder: Lead Alloy, Tin-Lead Alloy, and Tin Alloy, Flux Cored Ribbon and Wire, and Solid Form Military Standards MIL-STD-105 Sampling Procedures and Tables for Inspection by Attributes MIL-STD-202 Test Methods for Electrical and Electronic Component Parts MIL-STD-275 Printed Wiring for Electronic Equipment MIL-STD-1130 Connections, Electrical, Solderless Wrapped MIL-STD-1344 Test Methods for Electrical Connectors MIL-STD-45662 Calibration System Requirements Industry Specifications/Standards UL-94 Tests for Flammability of Plastic Materials ASTM B-159 Phosphor Bronze Wire ASTM D-4066 Reinforced and Filled Nylon Injection Molding and Extrusion Materials FCI Labs Reports-Supporting Data ZA5-2625 L ead Free Plating investigation 3.0 REQUIREMENTS 3.1 Qualification Connectors furnished under this specification shall be products capable of meeting the qualification test requirements specified herein. 3.2 Material The material for each part shall be as specified herein, or equivalent. Substitute material shall meet the performance requirements of this specification. Copyright FCI Form E-3334 GS-01-001 Rev E PDS: Rev :E STATUS:Released Printed: Jul 09, 2015