Assembly Instructions-C1 Amphenol UHF UG STANDARD SOLDER TYPE PLUGS 83-1SP, 83-1SP-1050, 83-1SP-15RFX, 83-822 coupling ring plug sub-assembly Amphenol Connector Cable Attachment Data Stripping Dimensions, inches (mm) Number Type RG-/U Outer Inner a b c 83-1SP-1050 UHF Plug 8, 9, 11, 213, 214, 63, 87A, 225 Solder Solder 1.25(31.8) .687(17.4) .625(15.9) 83-1SP UHF Plug 8, 9, 11, 213, 214, 63, 87A, 225 Solder Solder 1.25(31.8) .687(17.4) .625(15.9) 83-1SP-15RFX UHF Plug 8, 9, 11, 213, 214, 63, 87A, 225 Solder Solder 1.13(28.6) .689(17.5) .625(15.9) 83-822 UHF Plug 8, 9, 11, 213, 214, 63, 87A, 225 Solder Solder 1.25(31.8) .687(17.4) .625(15.9) 83-59 UHF Angle Plug 8, 9, 11, 213, 214, 63, 87A, 225 Solder Solder .844(21.4) .391(9.9) .250(6.4) 83-67 UHF Angle Plug 8, 9, 11, 213, 214, 63, 87A, 225 Solder Solder .844(21.4) .391(9.9) .250(6.4) Step 1 Step 1 Slide coupling ring onto cable. Cut end of cable even and strip jacket, braid and dielectric to dimensions shown in aA table . All cuts are to be sharp and square. Do not nick B b braid, dielectric or center conductor. Tin exposed center STEP 1 C c conductor and braid, avoiding excessive heat. Step 2 Screw the plug sub-assembly on cable. Solder assembly to Step 2 braid through solder holes, making a good bond between SOLDER HEREsolder here braid and shell. Solder conductor to contact. Do not use STEP 2 excessive heat. Step 3 For final assembly on straight plugs, move coupling ring forward Step 3 and screw in place on plug sub-assembly. STEP 3 Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com 274