Assembly Instructions-C1 Amphenol UHF UG STANDARD SOLDER TYPE PLUGS 83-1SP, 83-1SP-1050, 83-1SP-15RFX, 83-822 coupling ring plug sub-assembly Amphenol Connector Cable Attachment Data Stripping Dimensions, inches (mm) Number Type RG-/U Outer Inner a b c 83-1SP-1050 UHF Plug 8, 9, 11, 213, 214, 63, 87A, 225 Solder Solder 1.25(31.8) .687(17.4) .625(15.9) 83-1SP UHF Plug 8, 9, 11, 213, 214, 63, 87A, 225 Solder Solder 1.25(31.8) .687(17.4) .625(15.9) 83-1SP-15RFX UHF Plug 8, 9, 11, 213, 214, 63, 87A, 225 Solder Solder 1.13(28.6) .689(17.5) .625(15.9) 83-822 UHF Plug 8, 9, 11, 213, 214, 63, 87A, 225 Solder Solder 1.25(31.8) .687(17.4) .625(15.9) 83-59 UHF Angle Plug 8, 9, 11, 213, 214, 63, 87A, 225 Solder Solder .844(21.4) .391(9.9) .250(6.4) 83-67 UHF Angle Plug 8, 9, 11, 213, 214, 63, 87A, 225 Solder Solder .844(21.4) .391(9.9) .250(6.4) Step 1 Step 1 Slide coupling ring onto cable. Cut end of cable even and strip jacket, braid and dielectric to dimensions shown in aA table . All cuts are to be sharp and square. Do not nick B b braid, dielectric or center conductor. Tin exposed center STEP 1 C c conductor and braid, avoiding excessive heat. Step 2 Screw the plug sub-assembly on cable. Solder assembly to Step 2 braid through solder holes, making a good bond between SOLDER HEREsolder here braid and shell. Solder conductor to contact. Do not use STEP 2 excessive heat. Step 3 For final assembly on straight plugs, move coupling ring forward Step 3 and screw in place on plug sub-assembly. STEP 3 Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com 274Assembly Assembly Instructions-C2 Amphenol UHF UG STANDARD SOLDER TYPE WITH REDUCING ADAPTER FOR PLUGS 83-1SP, 83-1SP-1050, 83-1SP-15RFX, 83-822, USING 83-168 83-168-RFX, OR 83-185, 83-185-RFX REDUCING ADAPTER coupling ring 83-168 or 83-168-RFX for RG-59 plug sub-assembly 83-185 or 83-185-RFX for RG-58 reducing adapter Cable RG-/U Cable RG-/U Attachment Data Using 83-168 or 83-185 Using 83-168-RFX or 83-185-RFX Amphenol Connector (using 83-168 (using 83-185 Stripping Dims, inches (mm) Stripping Dims, inches (mm) Number Type Outer Inner or 83-168-RFX) or 83-185-RFX) a b c a b c 83-1SP UHF Plug 59 58 Solder Solder .750(19.1) .375(9.5) .625(15.9) .689(17.5) .375(9.5) .551(14.0) 83-1SP-1050 UHF Plug 59 58 Solder Solder .750(19.1) .375(9.5) .625(15.9) .689(17.5) .375(9.5) .551(14.0) 83-1SP-15RFX UHF Plug 59 58 Solder Solder .750(19.1) .375(9.5) .625(15.9) .689(17.5) .375(9.5) .551(14.0) 83-750 UHF Plug 59 58 Solder Solder .750(19.1) .375(9.5) .625(15.9) .689(17.5) .375(9.5) .551(14.0) 83-822 UHF Plug 59 58 Solder Solder .750(19.1) .375(9.5) .625(15.9) .689(17.5) .375(9.5) .551(14.0) Step 1 Step 1 Slide coupling ring and adapter onto cable. Cut end of A cable even and strip jacket to dimension shown in table. STEP 1 a B Step 2 Step 2 Position adapter flush with end of cable jacket. Fan braid slightly and fold back over body of adapter as b shown. Press braid down over body and trim to dimension b. C c STEP 2 Bare conductor to dimension c shown in table. Tin exposed center conductor and braid, avoiding excessive heat. Step 3 Step 3 Screw plug sub-assembly onto adapter. Solder braid to shell SOLDER HERE solder here through solder holes, making a good bond between braid STEP 3 and shell. Solder conductor to contact. Do not use excessive heat. Step 4 Step 4 For final assembly, screw coupling ring onto plug sub-assembly. STEP 4 Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com 275
