5 4 3 2 1 NOTES: REVISIONS 4. PACKAGING: REV DESCRIPTION DATE ECN BY A. QUANTITY: SINGLE PACK 1. MATERIALS AND FINISHES: B. MARKING: PACKAGING TO BE MARKED 1 PROTOTYPE RELEASE 17-NOV-20 -- SK BODY, BULLET CONTACT, SLEEVE, INNER FERRULE, AMPHENOL RF, 901-10752 & DATE COD 2 NO CHANGES TO THIS SHEET 15-MAR-21 -- KR HEX NUT & LOCK WASHER - BRASS, GOLD PLATING CONTACT - BeCu, GOLD PLATING 5. CABLE ASSEMBLY INSTRUCTIONS: INSULATOR & INSULATOR DISC - PTFE, NATURAL A. TRIM CABLE AS SHOWN. GASKET - SILICONE RUBBER, RED D 6.50 D B. INSERT CABLE THROUGH INNER FERRULE AND PEEL BRAID BACK, 0.256 OVER INNER FERRULE. 2. ELECTRICAL: C. INSTALL SLEEVE AND INSULATOR DISC OVER CABLE, A. IMPEDANCE: 50 OHM BOTTOMING ON INNER FERRULE. 6.00 B. FREQUENCY: DC - 6 GHz D. SOLDER BULLET CONTACT TO CABLE CENTER CONDUCTOR, 0.236 C. VSWR: 1.30 MAX. DC - 3 GHz BOTTOMING ON INSULATOR DISC. 1.40 MAX. 3 - 6 GHz E. INSERT CABLE INTO CONNECTOR UNTIL IT BOTTOMS. D. DIELECTRIC WITHSTANDING VOLTAGE: 500 VRMS, MIN. F. CRIMP BODY OVER INNER FERRULE USING 0.105 HEX. 3. MECHANICAL: 6. SHOWS CABLE ENTRY DIMENSIONS. A. DURABILITY: 500 CYCLES MIN. RECOMMENDED MOUNTING B. TEMPERATURE RANGE: -65 C TO +165 C SCALE 3.000 HOLE DIMENSIONS 5.00 0.197 CENTER CONDUCTOR & BRAID 17.83 REF 0.702 2.25 10.20 REF 2.10 REF 0.089 0.402 0.083 CENTER CONDUCTOR GASKET C C RECOMMENDED CABLE STRIPPING DIMENSIONS 6 6 6 6 3.10 REF 2.49 REF 0.34 0.41 0.50 1.22 0.122 0.098 0.013 0.016 0.020 0.048 INTERFACE PER MIL-STD-348 SERIES: SMA JACK B B BULLET INSULATOR SLEEVE INNER CONTACT DISC FERRULE 1/4-36UNS-2A 5.85 REF THREAD 0.230 D FLAT 8.00 MM WRENCH LOCK WASHER 11.00 MM WRENCH 3.00 0.118 MAX. PANEL THICKNESS CUSTOMER OUTLINE DRAWING PRELIMINARY ISSUE ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY A A MATERIAL TITLE NOTICE: These drawings, specifications, or other data (1) are, and remain the property of Amphenol corp. UNLESS OTHERWISE SPECIFIED (2) must be returned upon request and (3) are confidential and not to be disclosed to any person other DIMENSIONS ARE METRIC INCHES AND TOLERANCES ARE: Amphenol RF than those to whom they are given by Amphenol Corp. The furnishing of these drawings, specifications, <0.5mm = 0.05mm <0.020 = 0.002 SEE NOTES SMA STR BHD JACK or other data by Amphenol Corp., or to any other person to anyone for any purpose is not to be DRAWING NO. >0.5 - 6mm = 0.1mm >0.020 - 0.236 = 0.004 regarded by implication or otherwise in any manner licensing, granting rights to permitting such holder SIZE REV 901-10752 >6.00 - 30mm = 0.2mm >0.236 - 1.181 = 0.008 or any other person to manufacture, use or sell any product, process or design, patented or otherwise, FOR 0.81 MM CABLE ITEM NO. that may in any way be related to or disclosed by said drawings, specifications, or other data. >30.00 - 120mm = 0.3mm >1.181 - 4.725 = 0.012 901-10752 --------------------------------------------------------- REFERENCE EAR ENGINEER DATE PART NO. B THIRD ANGLE PROJ. ANGLES = 1 2 10132 KAVI S 17-NOV-20 SHEET NO. 2 OF 2 SCALE: 9.0:1.0 901-10752 5 4 3 2 1X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for RF Connectors / Coaxial Connectors category: Click to view products by Amphenol manufacturer: Other Similar products are found below : 8915-1511-000 89674-0827 6001-7071-019 6002-7051-003 6002-7551-202 6059674-1 619550-1 630059-000 M39030/3-01N 6500-7071- 046 6769 CX050L2AQ 7002-1541-010 7002-1542-011 7002-1572-002 7003-1542-011 7004-1512-000 7009-1511-004 7010-1511-000 7029-1511-060 7101-1541-010 7101-1571-002 7145-1521-002 7203-1571-003 7209-1511-011 7210-1511-015 7210-1511-019 73137-5015 73216-2241 73404-2300 7405-1521-005 7405-1521-802 8527 8547 FS11V 9049-9513-000 9074-9513-000 9101-9573-002 910A205F 9130-9573-002 PL11SC-026 PL375-33 PL40-5 PL74C-221 PL75MC-217 PL803-7 980-8666-005 1200690078 1-201144-1 R107003010W