TITLE: DWG NO: REV: SH: OF: KIT,RECPT AND BACKSHELL,SZ 24 AHDM04-24-47SR-059 A1 1 1 REVISIONS REV ECO DESCRIPTION DATE BY APPR 26.0 96.8 A1 -- RELEASED 16MAR2020 J. HEAD DH 18.8 LARGE BUSHING 39.7 BUSHING BACKSHELL 2X SCREW AND LOCK WASHER 2X LATCH SEGMENT 2X RECOMMENDED TORQUE : 1.5-2.0 NM NOTES: UNLESS OTHERWISE SPECIFIED 1. RECEPTACLE MATERIAL: SHELL: ZINC ALLOY, NICKEL PLATED INSERT AND RETAINING RING: THERMOPLASTIC KIT SEAL: SILICONE RUBBER SMALL BUSHING 2. BACKSHELL MATERIAL: RECEPTACLE SHELL: ALUMINIUM ALLOY, NICKEL PLATED AHDM04-24-47SR LATCH SEGMENT: ALUMINIUM ALLOY, NICKEL PLATED SCREW AND LOCK WASHER: STAINLESS STEEL BUSHING: EPDM. BACKSHELL 3. SPECIFICATIONS: AHDMBS-24-059 3.1 OPERATING TEMPERATURE: -55 TO +125. 3.2 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE 1500 VOLTS AC. 3.3 INSULATION RESISTANCE: 1000 MEGOHM MIN 25 . ASSEMBLED 3.4 MOISTURE RESISTANCE: IP67 & IP69K (MATED CONDITION). 3.5 MATING CYCLE DURABILITY: 100 CYCLES 3.6 RoHS COMPLIANT HD34-24-47SE-059 AHDM04-24-47SR-059 PART NUMBER DESCRIPTION ITEM 4. APPLY TO CABLE OD SIZE: 11.20-24.08 . CAN BE USED: 4.1. WITH LARGE AND SMALL BUSHINGS IN PLACE. QUANTITY MATERIALS LIST UNLESS OTHERWISE SPECIFIED 4.2. WITH ONLY LARGE BUSHING IN PLACE. SIGNATURES DATE 1) All dimensions are in metric(mm). DRAWN: 2) Tolerances are as follows: Amphenol 4.3. WITH BOTH BUSHINGS REMOVED. J. HEAD 16MAR2020 1 PL DEC 0.30 Fractions 1/64 CHECKED: 2 PL DEC 0.15 Angles 1 3 PL DEC 0.08 Sine Systems - www.amphenol-sine.com 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. ENGINEER: 44724 Morley Drive 3) Note reference = X Clinton Township, MI 48036 APPROVAL: MATERIAL SPECIFICATIONS: 6. SEE SPECIFIC RECEPTACLE DRAWING FOR: CUSTOMER: DURAMATE AHDM RECEPT, SIZE 24, WD THD, 6.1 CONTACT SIZE AND WIRE RANGE. THIS DRAWING IS SUPPLIED FOR KIT W/ CABLE CLAMP BACKSHELL INFORMATION ONLY. DESIGN FEATURES, 6.2 RETAINING RING COLOR. PROCESS SPECIFICATIONS: SPECIFICATIONS AND PERFORMANCE DATA SIZE TYPE DWG NO: REVISION SHOWN HEREON ARE THE PROPERTY OF 6.3 MATING PART(S). THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL B C- AHDM04-24-47SR-059 A1 6.4 CONTACT LAYOUT AND ALL OTHER SPECIFICATIONS. DIMENSIONS ARE SUBJECT TO NORMAL NEXT ASS Y: SCALE: MANUFACTURING VARIATIONS. SHEET OF NONE 1 1ATM Series - Contact Size 20 Options Stamped & Formed Contacts, Sockets & Pins Machined Contacts, Sockets & Pins Part Number Description Size AWG Type Part Number Description Size AWG Type AT60-20-0144 Male Contact - Pin, Gold-plated 20 16-22 Stamped & Formed AT60-010-2031 Male Contact - Pin, Gold-plated 20 16-18 Machined AT62-005-20141 Female Contact - Socket, Gold-plated 20 16-18 Machined AT62-20-0144 Female Contact - Socket, Gold-plated 20 16-22 Stamped & Formed AT60-20-0244 Male Contact - Socket, Gold-plated 20 16-22 Stamped & Formed AT60-010-20141 Male Contact - Pin, Nickel-plated 20 16-18 Machined AT62-20-0244 Female Contact - Socket, Gold-plated 20 16-22 Stamped & Formed AT62-005-2031 Female Contact - Socket, Nickel-plated 20 16-18 Machined AT60-20-0122 Male Contact - Pin, Nickel-plated 20 16-22 Stamped & Formed AT60-202-2031 Male Contact - Pin, Gold-plated 20 20-22 Machined AT62-201-2031 Female Contact - Socket, Gold-plated 20 20-22 Machined AT62-20-0122 Female Contact - Socket, Nickel-plated 20 16-22 Stamped & Formed AT60-20-0222 Male Contact - Socket, Nickel-plated 20 16-22 Stamped & Formed AT60-202-20141 Male Contact - Pin, Nickel-plated 20 20-22 Machined AT62-20-0222 Female Contact - Socket, Nickel-plated 20 16-22 Stamped & Formed AT62-201-20141 Female Contact - Socket, Nickel-plated 20 20-22 Machined AT60-20-0277 Male Contact - Socket, Tin-plated 20 16-22 Stamped & Formed Tooling - Machined Contacts AT62-20-0277 Female Contact - Socket, Tin-plated 20 16-22 Stamped & Formed Part Part Number Description AT60-20-0422 Male Contact - Socket, Nickel-plated 20 20-22 Stamped & Formed AT62-20-0444 Female Contact - Socket, Gold-plated 20 20-22 Stamped & Formed Universal Hand Crimp Tool, Size 12/16/20 CA-5D12 (Machined contacts only) Tooling - Stamped & Formed Contacts Part Part Number Description MFX-3974 Crimp Die - Size 20 (S&F contacts only) Pneumatic Crimp Tool, Size 12/16/20 CA-5E12 (Machined contacts only) MFX-3976 Crimp Die - Size 20 (S&F contacts only) 20-22AWG -04XX Series MFX-3978 Crimp Die - Size 20 (S&F contacts only) 20-22AWG -02XX Series ATT-20-00 Hand Crimp Tool - Size 20, 20AWG (S&F contacts only) Contact Removal Tools Part Part Number Description ATRT-100 Used for removal of contacts for A Series products AT11-240-2005 Contact Removal Tool, Plastic, Size 20 AT13-204-2005 Sealing Plug, Size 20, White Amphenol Sine Systems 44724 Morley Drive Clinton Township, MI 48036 USA www.amphenol-sine.com 09/2021