TITLE: DWG NO: REV: SH: OF: KIT,PLUG AND BACKSHELL,SZ 18 AHDM06-18-08SR-059 A1 1 1 REVISIONS REV ECO DESCRIPTION DATE BY APPR 120.7 A1 -- RELEASED 16MAR2020 J. HEAD DH 15.9 39.0 BUSHING BACKSHELL 2X SCREW AND LOCK WASHER 2X LATCH SEGMENT 2X RECOMMENDED TORQUE : 1.5-2.0 NM NOTES: UNLESS OTHERWISE SPECIFIED 1. PLUG MATERIAL: SHELL: ZINC ALLOY, NICKEL PLATED KIT COUPLING RING: ALUMINUM ALLOY, NICKEL PLATED INSERT AND RETAINING RING: THERMOPLASTIC SEAL: SILICONE RUBBER PLUG AHDM06-18-08SR 2. BACKSHELL MATERIAL: SHELL: ALUMINIUM ALLOY, NICKEL PLATED LATCH SEGMENT: ALUMINIUM ALLOY, NICKEL PLATED SCREW AND LOCK WASHER: STAINLESS STEEL BUSHING: EPDM. BACKSHELL AHDMBS-18-059 3. SPECIFICATIONS: 3.1 OPERATING TEMPERATURE: -55 TO +125. 3.2 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE 1500 VOLTS AC. ASSEMBLED 3.3 INSULATION RESISTANCE: 1000 MEGOHM MIN 25 . 3.4 MOISTURE RESISTANCE: IP67 & IP69K (MATED CONDITION). 3.5 MATING CYCLE DURABILITY: 100 CYCLES HD36-18-18SE-059 AHDM06-18-08SR-059 3.6 RoHS COMPLIANT PART NUMBER DESCRIPTION ITEM QUANTITY MATERIALS LIST 4. APPLY BACKSHELL TO CABLE OD SIZE: 11.20-19.30 . CAN BE UNLESS OTHERWISE SPECIFIED SIGNATURES DATE USED WITH OR WITHOUT BUSHING. 1) All dimensions are in metric(mm). DRAWN: 2) Tolerances are as follows: Amphenol J. HEAD 16MAR2020 1 PL DEC 0.30 Fractions 1/64 CHECKED: 2 PL DEC 0.15 Angles 1 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. 3 PL DEC 0.08 Sine Systems - www.amphenol-sine.com ENGINEER: 44724 Morley Drive 3) Note reference = X Clinton Township, MI 48036 APPROVAL: 6. SEE SPECIFIC PLUG DRAWING FOR: MATERIAL SPECIFICATIONS: CUSTOMER: 6.1 CONTACT SIZE AND WIRE RANGE. DURAMATE AHDM PLUG, SIZE 18, WD THD, 6.2 RETAINING RING COLOR. THIS DRAWING IS SUPPLIED FOR KIT W/ CABLE CLAMP BACKSHELL INFORMATION ONLY. DESIGN FEATURES, PROCESS SPECIFICATIONS: 6.3 MATING PART(S). SPECIFICATIONS AND PERFORMANCE DATA SIZE TYPE DWG NO: REVISION SHOWN HEREON ARE THE PROPERTY OF 6.4 CONTACT LAYOUT AND ALL OTHER SPECIFICATIONS. THE AMPHENOL CORPORATION. NO RIGHTS OF REPRODUCTION ARE IMPLIED. ALL B C- AHDM06-18-08SR-059 A1 DIMENSIONS ARE SUBJECT TO NORMAL NEXT ASS Y: SCALE: MANUFACTURING VARIATIONS. SHEET OF NONE 1 1ATP Series - Contact Size 12 Options Stamped & Formed Contacts, Sockets & Pins Machined Contacts, Sockets & Pins Part Number Description Size AWG Type Part Number Description Size AWG Type AT60-12-0244 Male Contact - Pin, Gold-plated 12 10-12 Stamped & Formed AT60-204-12141-10 Male Contact - Pin, Nickel-plated 12 10-12 Machined AT62-203-12141-10 Female Contact - Socket, Nickel-plated 12 10-12 Machined AT62-12-0244 Female Contact - Socket, Gold-plated 12 10-12 Stamped & Formed AT60-12-0222 Male Contact - Pin, Nickel-plated 12 10-12 Stamped & Formed AT60-220-1231 Male Contact - Pin, Gold-plated 12 12-14 Machined AT62-12-0222 Female Contact - Socket, Nickel-plated 12 10-12 Stamped & Formed AT62-210-1231 Female Contact - Socket, Gold-plated 12 12-14 Machined AT60-12-0144 Male Contact - Pin, Gold-plated 12 12-14 Stamped & Formed AT60-204-12141 Male Contact - Pin, Nickel-plated 12 12-14 Machined AT62-203-12141 Female Contact - Socket, Nickel-plated 12 12-14 Machined AT62-12-0144 Female Contact - Socket, Gold-plated 12 12-14 Stamped & Formed AT60-12-0166 Male Contact - Pin, Nickel-plated 12 12-14 Stamped & Formed AT62-12-0166 Female Contact - Socket, Nickel-plated 12 12-14 Stamped & Formed DiagnosticGrade Machined Contacts, Sockets & Pins Smaller AWG for Diagnostic Applications Gold-plated Increased Mating Cycles Cost-effective Part Number Description Size AWG Type Tooling - Stamped & Formed Contacts 65-54749 Male Contact - DiagnosticGrade, Pin, Gold-plated 12 20 Machined Part Part Number Description Female Contact - DiagnosticGrade, Socket, AT62-210-1231-1820 12 20 Machined Gold-plated MFX-3973 Crimp Die - Size 12 (S&F contacts only) Tooling - Machined Contacts Part Part Number Description MFX-3985 Crimp Die - Size 12 (S&F contacts only) 10-12AWG -02XX Series Universal Hand Crimp Tool, Size 12/16/20 CA-5D12 (Machined contacts only) ATT-12-00 Hand Crimp Tool - Size 12, 12AWG (S&F contacts only) Pneumatic Crimp Tool, Size 12/16/20 CA-5E12 (Machined contacts only) Contact Removal Tools Part Part Number Description ATRT-100 Used for removal of contacts for A Series products AT11-337-1205 Contact Removal Tool, Plastic, Size 12 Amphenol Sine Systems A114017 Sealing Plug, Size 12, White 44724 Morley Drive Clinton Township, MI 48036 USA www.amphenol-sine.com 09/2021