TITLE: DWG NO: REV: SH: OF: KIT,PLUG AND BACKSHELL,SZ 24 AHDM06-24-16SN-059 A1 1 1 REVISIONS REV ECO DESCRIPTION DATE BY APPR 118.1 A1 -- RELEASED 11NOV2020 J. HEAD DH 18.8 LARGE BUSHING 45.7 BUSHING BACKSHELL 2X SCREW AND LOCK WASHER 2X LATCH SEGMENT 2X RECOMMENDED TORQUE : 1.5-2.0 NM NOTES: UNLESS OTHERWISE SPECIFIED 1. PLUG MATERIAL: SHELL: ZINC ALLOY, NICKEL PLATED COUPLING RING: ALUMINUM ALLOY, NICKEL PLATED INSERT AND RETAINING RING: THERMOPLASTIC KIT SEAL: SILICONE RUBBER SMALL 2. BACKSHELL MATERIAL: BUSHING PLUG SHELL: ALUMINIUM ALLOY, NICKEL PLATED AHDM06-24-16SN LATCH SEGMENT: ALUMINIUM ALLOY, NICKEL PLATED SCREW AND LOCK WASHER: STAINLESS STEEL BUSHING: EPDM. 3. SPECIFICATIONS: BACKSHELL 3.1 OPERATING TEMPERATURE: -55 TO +125. AHDMBS-24-059 3.2 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE 1500 VOLTS AC. 3.3 INSULATION RESISTANCE: 1000 MEGOHM MIN 25 . ASSEMBLED 3.4 MOISTURE RESISTANCE: IP67 & IP69K (MATED CONDITION). 3.5 MATING CYCLE DURABILITY: 100 CYCLES 3.6 RoHS COMPLIANT HD36-24-16SN-059 AHDM06-24-16SN-059 4. APPLY TO CABLE OD SIZE: 11.20-24.08 . CAN BE USED: PART NUMBER DESCRIPTION ITEM 4.1. WITH LARGE AND SMALL BUSHINGS IN PLACE. QUANTITY MATERIALS LIST 4.2. WITH ONLY LARGE BUSHING IN PLACE. UNLESS OTHERWISE SPECIFIED SIGNATURES DATE 1) All dimensions are in metric(mm). 4.3. WITH BOTH BUSHINGS REMOVED. DRAWN: 2) Tolerances are as follows: Amphenol J. HEAD 11NOV2020 1 PL DEC 0.30 Fractions 1/64 CHECKED: 2 PL DEC 0.15 Angles 1 3 PL DEC 0.08 Sine Systems - www.amphenol-sine.com 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. ENGINEER: 44724 Morley Drive 3) Note reference = X Clinton Township, MI 48036 APPROVAL: 6. SEE SPECIFIC PLUG DRAWING FOR: MATERIAL SPECIFICATIONS: CUSTOMER: 6.1 CONTACT SIZE AND WIRE RANGE. DURAMATE AHDM PLUG, SIZE 24, WD THD, THIS DRAWING IS SUPPLIED FOR KIT W/ CABLE CLAMP BACKSHELL 6.2 RETAINING RING COLOR. INFORMATION ONLY. DESIGN FEATURES, PROCESS SPECIFICATIONS: 6.3 MATING PART(S). SPECIFICATIONS AND PERFORMANCE DATA SIZE TYPE DWG NO: REVISION SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS 6.4 CONTACT LAYOUT AND ALL OTHER SPECIFICATIONS. OF REPRODUCTION ARE IMPLIED. ALL B C- AHDM06-24-16SN-059 A1 DIMENSIONS ARE SUBJECT TO NORMAL NEXT ASS Y: SCALE: MANUFACTURING VARIATIONS. SHEET OF NONE 11ATP Series - Contact Size 12 Options Stamped & Formed Contacts, Sockets & Pins Machined Contacts, Sockets & Pins Part Number Description Size AWG Type Part Number Description Size AWG Type AT60-12-0244 Male Contact - Pin, Gold-plated 12 10-12 Stamped & Formed AT60-204-12141-10 Male Contact - Pin, Nickel-plated 12 10-12 Machined AT62-203-12141-10 Female Contact - Socket, Nickel-plated 12 10-12 Machined AT62-12-0244 Female Contact - Socket, Gold-plated 12 10-12 Stamped & Formed AT60-12-0222 Male Contact - Pin, Nickel-plated 12 10-12 Stamped & Formed AT60-220-1231 Male Contact - Pin, Gold-plated 12 12-14 Machined AT62-12-0222 Female Contact - Socket, Nickel-plated 12 10-12 Stamped & Formed AT62-210-1231 Female Contact - Socket, Gold-plated 12 12-14 Machined AT60-12-0144 Male Contact - Pin, Gold-plated 12 12-14 Stamped & Formed AT60-204-12141 Male Contact - Pin, Nickel-plated 12 12-14 Machined AT62-203-12141 Female Contact - Socket, Nickel-plated 12 12-14 Machined AT62-12-0144 Female Contact - Socket, Gold-plated 12 12-14 Stamped & Formed AT60-12-0166 Male Contact - Pin, Nickel-plated 12 12-14 Stamped & Formed AT62-12-0166 Female Contact - Socket, Nickel-plated 12 12-14 Stamped & Formed DiagnosticGrade Machined Contacts, Sockets & Pins Smaller AWG for Diagnostic Applications Gold-plated Increased Mating Cycles Cost-effective Part Number Description Size AWG Type Tooling - Stamped & Formed Contacts 65-54749 Male Contact - DiagnosticGrade, Pin, Gold-plated 12 20 Machined Part Part Number Description Female Contact - DiagnosticGrade, Socket, AT62-210-1231-1820 12 20 Machined Gold-plated MFX-3973 Crimp Die - Size 12 (S&F contacts only) Tooling - Machined Contacts Part Part Number Description MFX-3985 Crimp Die - Size 12 (S&F contacts only) 10-12AWG -02XX Series Universal Hand Crimp Tool, Size 12/16/20 CA-5D12 (Machined contacts only) ATT-12-00 Hand Crimp Tool - Size 12, 12AWG (S&F contacts only) Pneumatic Crimp Tool, Size 12/16/20 CA-5E12 (Machined contacts only) Contact Removal Tools Part Part Number Description ATRT-100 Used for removal of contacts for A Series products AT11-337-1205 Contact Removal Tool, Plastic, Size 12 Amphenol Sine Systems A114017 Sealing Plug, Size 12, White 44724 Morley Drive Clinton Township, MI 48036 USA www.amphenol-sine.com 09/2021