TITLE: DWG NO: REV: SH: OF: KIT,PLUG AND BACKSHELL,SZ 24 AHDM06-24-47PR-059 A1 1 1 REVISIONS REV ECO DESCRIPTION DATE BY APPR 118.1 A1 -- RELEASED 16MAR2020 J. HEAD DH 18.8 LARGE BUSHING 45.7 BUSHING BACKSHELL 2X SCREW AND LOCK WASHER 2X LATCH SEGMENT 2X RECOMMENDED TORQUE : 1.5-2.0 NM NOTES: UNLESS OTHERWISE SPECIFIED 1. PLUG MATERIAL: SHELL: ZINC ALLOY, NICKEL PLATED COUPLING RING: ALUMINUM ALLOY, NICKEL PLATED INSERT AND RETAINING RING: THERMOPLASTIC KIT SEAL: SILICONE RUBBER SMALL 2. BACKSHELL MATERIAL: BUSHING PLUG SHELL: ALUMINIUM ALLOY, NICKEL PLATED AHDM06-24-47PR LATCH SEGMENT: ALUMINIUM ALLOY, NICKEL PLATED SCREW AND LOCK WASHER: STAINLESS STEEL BUSHING: EPDM. 3. SPECIFICATIONS: BACKSHELL 3.1 OPERATING TEMPERATURE: -55 TO +125. AHDMBS-24-059 3.2 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 MILLIAMPS CURRENT LEAKAGE 1500 VOLTS AC. 3.3 INSULATION RESISTANCE: 1000 MEGOHM MIN 25 . ASSEMBLED 3.4 MOISTURE RESISTANCE: IP67 & IP69K (MATED CONDITION). 3.5 MATING CYCLE DURABILITY: 100 CYCLES 3.6 RoHS COMPLIANT HD36-24-47PE-059 AHDM06-24-47PE-059 4. APPLY TO CABLE OD SIZE: 11.20-24.08 . CAN BE USED: PART NUMBER DESCRIPTION ITEM 4.1. WITH LARGE AND SMALL BUSHINGS IN PLACE. QUANTITY MATERIALS LIST 4.2. WITH ONLY LARGE BUSHING IN PLACE. UNLESS OTHERWISE SPECIFIED SIGNATURES DATE 1) All dimensions are in metric(mm). 4.3. WITH BOTH BUSHINGS REMOVED. DRAWN: 2) Tolerances are as follows: Amphenol J. HEAD 16MAR2020 1 PL DEC 0.30 Fractions 1/64 CHECKED: 2 PL DEC 0.15 Angles 1 3 PL DEC 0.08 Sine Systems - www.amphenol-sine.com 5. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. ENGINEER: 44724 Morley Drive 3) Note reference = X Clinton Township, MI 48036 APPROVAL: 6. SEE SPECIFIC PLUG DRAWING FOR: MATERIAL SPECIFICATIONS: CUSTOMER: DURAMATE AHDM PLUG, SIZE 24, WD THD, 6.1 CONTACT SIZE AND WIRE RANGE. THIS DRAWING IS SUPPLIED FOR KIT W/ CABLE CLAMP BACKSHELL 6.2 RETAINING RING COLOR. INFORMATION ONLY. DESIGN FEATURES, PROCESS SPECIFICATIONS: SPECIFICATIONS AND PERFORMANCE DATA SIZE TYPE DWG NO: REVISION 6.3 MATING PART(S). SHOWN HEREON ARE THE PROPERTY OF THE AMPHENOL CORPORATION. NO RIGHTS 6.4 CONTACT LAYOUT AND ALL OTHER SPECIFICATIONS. OF REPRODUCTION ARE IMPLIED. ALL B C- AHDM06-24-47PR-059 A1 DIMENSIONS ARE SUBJECT TO NORMAL NEXT ASS Y: SCALE: MANUFACTURING VARIATIONS. SHEET OF NONE 1 1ATM Series - Contact Size 20 Options Stamped & Formed Contacts, Sockets & Pins Machined Contacts, Sockets & Pins Part Number Description Size AWG Type Part Number Description Size AWG Type AT60-20-0144 Male Contact - Pin, Gold-plated 20 16-22 Stamped & Formed AT60-010-2031 Male Contact - Pin, Gold-plated 20 16-18 Machined AT62-005-20141 Female Contact - Socket, Gold-plated 20 16-18 Machined AT62-20-0144 Female Contact - Socket, Gold-plated 20 16-22 Stamped & Formed AT60-20-0244 Male Contact - Socket, Gold-plated 20 16-22 Stamped & Formed AT60-010-20141 Male Contact - Pin, Nickel-plated 20 16-18 Machined AT62-20-0244 Female Contact - Socket, Gold-plated 20 16-22 Stamped & Formed AT62-005-2031 Female Contact - Socket, Nickel-plated 20 16-18 Machined AT60-20-0122 Male Contact - Pin, Nickel-plated 20 16-22 Stamped & Formed AT60-202-2031 Male Contact - Pin, Gold-plated 20 20-22 Machined AT62-201-2031 Female Contact - Socket, Gold-plated 20 20-22 Machined AT62-20-0122 Female Contact - Socket, Nickel-plated 20 16-22 Stamped & Formed AT60-20-0222 Male Contact - Socket, Nickel-plated 20 16-22 Stamped & Formed AT60-202-20141 Male Contact - Pin, Nickel-plated 20 20-22 Machined AT62-20-0222 Female Contact - Socket, Nickel-plated 20 16-22 Stamped & Formed AT62-201-20141 Female Contact - Socket, Nickel-plated 20 20-22 Machined AT60-20-0277 Male Contact - Socket, Tin-plated 20 16-22 Stamped & Formed Tooling - Machined Contacts AT62-20-0277 Female Contact - Socket, Tin-plated 20 16-22 Stamped & Formed Part Part Number Description AT60-20-0422 Male Contact - Socket, Nickel-plated 20 20-22 Stamped & Formed AT62-20-0444 Female Contact - Socket, Gold-plated 20 20-22 Stamped & Formed Universal Hand Crimp Tool, Size 12/16/20 CA-5D12 (Machined contacts only) Tooling - Stamped & Formed Contacts Part Part Number Description MFX-3974 Crimp Die - Size 20 (S&F contacts only) Pneumatic Crimp Tool, Size 12/16/20 CA-5E12 (Machined contacts only) MFX-3976 Crimp Die - Size 20 (S&F contacts only) 20-22AWG -04XX Series MFX-3978 Crimp Die - Size 20 (S&F contacts only) 20-22AWG -02XX Series ATT-20-00 Hand Crimp Tool - Size 20, 20AWG (S&F contacts only) Contact Removal Tools Part Part Number Description ATRT-100 Used for removal of contacts for A Series products AT11-240-2005 Contact Removal Tool, Plastic, Size 20 AT13-204-2005 Sealing Plug, Size 20, White Amphenol Sine Systems 44724 Morley Drive Clinton Township, MI 48036 USA www.amphenol-sine.com 09/2021