TITLE: DWG NO: REV: SH: OF: AT SERIES, 2-WAY, PLUG, LED, 24V ,CLEAR CAP,BLACK, RVP CIRCUIT AT06-2S-LED24VX1 A2 1 1 - + 2 1 24VDC RVPC GRN XX REVISIONS REV ECO DESCRIPTION DATE BY APPR LASER ENGRAVE POLARITY, CONTACT A1 - RELEASE NEW DRAWING 22JUN18 SULLEN TOMMY NUMBER, VOLTAGE, SEAL TYPE, SPECIAL A2 - UPDATE DRAWING 18MAR19 SULLEN TOMMY CIRCUIT TYPE (RVPC), AND LED COLOR CODE AS SHOWN IN THIS AREA. STRAIN RELIEF 17.6 END CAP - CLEAR NOTES: UNLESS OTHERWISE SPECIFIED SEE PART NUMBER CHART BELOW. 1. MATERIAL: XX = SEAL CODE. RD IF REDUCED DIA., HOUSING: THERMOPLASTIC, BLACK 9 BLANK IF STANDARD SEAL. SEAL: SILICONE RUBBER 2. MODIFICATIONS: LIGHT EMITTING DIODE (GREEN), STRAIN RELIEF END CAP, REVERSE VOLTAGE CONNECTOR BODY - BLACK PROTECTION CIRCUIT (RVPC). 3. CONNECTOR SPECIFICATIONS: 3.1 CURRENT RATING: 13 AMPS REQUIRES BLACK CONTACT 3.2 DIELECTRIC WITHSTANDING VOLTAGE: LESS THAN 2 RETENTION WEDGE: AW2S-LED MILLIAMPS CURRENT LEAKAGE 1500 VOLTS AC. ( SOLD SEPARATELY ) 3.3 INSULATION RESISTANCE: 1000 MEGOHMS MIN 25C. 3.4 MOISTURE RESISTANCE: IP67 ( MATED CONDITION ) 44.7 3.5 MATING CYCLE DURABILITY: 100 CYCLES 3.6 ROHS COMPLIANT - -24VDC 4. LED SPECIFICATIONS: 4.1 FORWARD CURRENT: 30 MILLIAMPS TYPICAL 2 100 MILLIAMPS MAXIMUM 4.2 REVERSE CURRENT: 50 MICROAMPS MAXIMUM GREEN LED 4.3 POWER DISSIPATION: 120 MILLIWATTS MAXIMUM 4.4 FORWARD VOLTAGE: 4 VOLTS MAXIMUM GREEN LED SUPPRESSOR DIODE 4.5 REVERSE VOLTAGE: 5 VOLTS MAXIMUM R2 5. RESISTANCE SPECIFICATIONS: RESISTOR 5.1 RESISTANCE VALUE (R1): 680 OHMS R1 5.2 RESISTANCE VALUE (R2): 0 OHMS 1 5.3 POWER RATING: WATTS R1 8 RESISTOR (3X) 5.4 MAX.WORKING VOLTAGE: 150 VOLTS R1 COMPONENT TYPES: 6. SUPPRESSOR DIODE SPECIFICATIONS: R2 RESISTOR: TYPE 0805, R0, 1/8W + 6.1 STAND-OFF VOLTAGE: 26 VOLTS 6.2 MAX. FORWARD CURRENT: 5A 26V SMD LED: KPA-1606ZGC-G +24VDC 1 6.3 PEAK PULSE POWER DISSIPATION: 400 WATTS R1 RESISTOR: TYPE 0805, R680, 1/8W LED CONNECTOR DIAGRAM SMD T.V.S. DIODE: 400W, 26V, P4SMAJ26CA 7. MATING PART: AT04-2P* RECEPTACLE ( * = MODIFICATIONS AND COLORS ) 8. ALL DIMENSIONS ARE FOR REFERENCE USE ONLY. SEE P/N CHART PART NUMBER DESCRIPTION ITEM 9 CONTACT SIZE AND REAR SEAL WIRE RANGE: QUANTITY MATERIALS LIST UNLESS OTHERWISE SPECIFIED REDUCED DIAMETER SEAL: SIGNATURES DATE 1) All dimensions are in metric(mm). DRAWN: 2) Tolerances are as follows: Amphenol CONTACT MIN. INSUL MAX. INSUL TYPICAL SULLEN.ZHANG 18MAR19 1 PL DEC 0.30 Fractions 1/64 SIZE O.D. O.D. WIRE RANGE CHECKED: 2 PL DEC 0.15 Angles 1 18MAR19 ORION.LI Sine Systems - www.amphenol-sine.com 3 PL DEC 0.08 1.35 mm 3.05 mm PART NUMBER CHART ENGINEER: 44724 Morley Drive 3) Note reference = X 16 14 - 20 AWG (.053 in) (.120 in) Clinton Township, MI 48036 APPROVAL: TOMMY.XIE 18MAR19 SEAL PART NUMBER MATERIAL SPECIFICATIONS: STANDARD SEAL: CUSTOMER: AT SERIES, 2-WAY, PLUG, LED, 24V CONTACT MIN. INSUL MAX. INSUL TYPICAL STANDARD AT06-2S-LED24V01 THIS DRAWING IS SUPPLIED FOR CLEAR CAP, BLACK, RVP CIRCUIT INFORMATION ONLY. DESIGN FEATURES, SIZE O.D. O.D. WIRE RANGE PROCESS SPECIFICATIONS: SPECIFICATIONS AND PERFORMANCE DATA SIZE TYPE DWG NO: REVISION REDUCED DIAMETER AT06-2S-LED24VR1 SHOWN HEREON ARE THE PROPERTY OF 2.24 mm 3.68 mm THE AMPHENOL CORPORATION. NO RIGHTS 16 14 - 20 AWG OF REPRODUCTION ARE IMPLIED. ALL (.088 in) (.145 in) B C- AT06-2S-LED24VX1 A2 DIMENSIONS ARE SUBJECT TO NORMAL NEXT ASS Y: SCALE: MANUFACTURING VARIATIONS. SHEET OF NONE 1 1AT Series - Contact Size 16 Options Machined Contacts, Sockets & Pins Stamped & Formed Contacts, Sockets & Pins Part Number Description Size AWG Type Part Number Description Size AWG Type AT60-14-0144 Male Contact - Pin, Gold-plated 16 14-16 Stamped & Formed AT60-215-1631 Male Contact - Pin, Gold-plated 16 14 Machined AT62-209-1631 Female Contact - Socket, Gold-plated 16 14 Machined AT62-14-0144 Female Contact - Socket, Gold-plated 16 14-16 Stamped & Formed AT60-215-16141 Male Contact - Pin, Nickel-plated 16 14 Machined AT60-14-0122 Male Contact - Pin, Nickel-plated 16 14-16 Stamped & Formed AT62-14-0122 Female Contact - Socket, Nickel-plated 16 14-16 Stamped & Formed AT62-209-16141 Female Contact - Socket, Nickel-plated 16 14 Machined AT60-16-0144 Male Contact - Pin, Gold-plated 16 16-18 Stamped & Formed AT60-202-1631 Male Contact - Pin, Gold-plated 16 16-20 Machined AT62-201-1631 Female Contact - Socket, Gold-plated 16 16-20 Machined AT62-16-0144 Female Contact - Socket, Gold-plated 16 16-18 Stamped & Formed AT60-202-16141 Male Contact - Pin, Nickel-plated 16 16-20 Machined AT60-16-0122 Male Contact - Pin, Nickel-plated 16 16-18 Stamped & Formed AT62-16-0122 Female Contact - Socket, Nickel-plated 16 16-18 Stamped & Formed AT62-201-16141 Female Contact - Socket, Nickel-plated 16 16-20 Machined AT60-16-0644 Male Contact - Pin, Gold-plated 16 18-20 Stamped & Formed AT60-202-1631-22 Male Contact - Pin, Gold-plated 16 22-24 Machined AT62-201-1631-22 Female Contact - Socket, Gold-plated 16 22-24 Machined AT62-16-0644 Female Contact - Socket, Gold-plated 16 18-20 Stamped & Formed AT60-202-16141-22 Male Contact - Pin, Nickel-plated 16 22-24 Machined AT60-16-0622 Male Contact - Pin, Nickel-plated 16 18-20 Stamped & Formed AT62-16-0622 Female Contact - Socket, Nickel-plated 16 18-20 Stamped & Formed AT62-201-16141-22 Female Contact - Socket, Nickel-plated 16 22-24 Machined AT60-16-0844 Male Contact - Pin, Gold-plated 16 20-22 Stamped & Formed AT62-16-0844 Female Contact - Socket, Gold-plated 16 20-22 Stamped & Formed Tooling - Machined Contacts AT60-16-0822 Male Contact - Pin, Nickel-plated 16 20-22 Stamped & Formed Part Part Number Description AT62-16-0822 Female Contact - Socket, Nickel-plated 16 20-22 Stamped & Formed Universal Hand Crimp Tool, Size 12/16/20 CA-5D12 (Machined contacts only) Tooling - Stamped & Formed Contacts Part Part Number Description MFX-3950 Crimp Die - Size 16, 18-20AWG (S&F contacts only) Pneumatic Crimp Tool, Size 12/16/20 CA-5E12 (Machined contacts only) MFX-3953 Crimp Die - Size 16, 16-18AWG (S&F contacts only) MFX-3975 Crimp Die - Size 16, 14-16AWG (S&F contacts only) Contact Removal Tools MFX-3990 Crimp Die - Size 16, 20-22AWG (S&F contacts only) Part Part Number Description ATT-16-00 Hand Crimp Tool - Size 16, 14-16AWG (S&F contacts only) ATRT-100 Used for removal of contacts for A Series products ATT-16-01 Hand Crimp Tool - Size 16, 18-20AWG (S&F contacts only) ATT-1612-03 Hand Crimp Tool - Size 16, 20-22AWG (S&F contacts only) AT11-310-1605 Contact Removal Tool, Plastic, Size 16 Amphenol Sine Systems A114017 Sealing Plug, Size 16, White 44724 Morley Drive Clinton Township, MI 48036 USA www.amphenol-sine.com 09/2021