IDS-83 Amphenol Tru-Loc Splitter Amphenol Industrial Tru-Loc Splitter for Harsh Environments Amphenol Industrial introduces a Splitter connector Features: complimentary to its Tru-Loc family of products. The Tru-Loc Ingress Protection IP67 rated Splitter is designed to take a single 6-Way Tru-Loc Plug and Gold Plated 1.5mm Pin Contacts split the signal or power into two identical 6-Way Tru-Loc Plugs without degradation or intermittency. Resilient up to 32 grms vibration Dielectric Withstanding Voltage 1600 Vac RMS The Tru-Loc Splitter features a molded thermoplastic body Matched Impedance 120 Ohms, 2 pairs resistant to many fluids, including diesel fuel making this series Operating Temperature -40C to 150C ideal for harsh environments. True to the series, the Tru-Loc Splitter is vibration resistant to 32 grms, IP67 rated and can withstand operating temperatures up to 150C. Amphenols Splitter offers a means to combine many sensors into a single Engine Control Unit. The Splitter effectively branches a single six-circuit connector harness into two individual six- circuit connector harnesses while maintaining a matched impedance of 120 Ohms between the I/O power circuits and CAN circuits. The greatest benefit is being able to put both Power and CAN into a single connector harness reducing the number of connectors and harnesses produced by 2x for the CAN application. Amphenol Industrial offers a 6-Way Plug with contacts for either 16AWG or 20AWG wire and a 6-Way Terminating Resistor Plug - fitted with a 120 Ohm resistor for use at the end of the bus. www.amphenol-industrial.comIDS-16-4 Tru-loc 10-23-14:Layout 1 1/16/15 11:25 AM Page 2 Material Specification Plug with RADSOK Socket Contacts Plug Body Nylon Wire Seal Silicone Main Joint Seal Fluoroelastomer Socket Contact Copper Alloy w/ Stainless Steel Hood Receptacle with Pin Contacts Receptacle Body Nylon Pin Contact Copper Alloy Electrical Specifications Dielectric Withstanding Voltage (Test Voltage) 1600 Vac RMS Current Rating 13 amp (DC) (16 AWG Cable) Insulation Resistance 100 M Ohms Mechanical Specifications Connector Mating Force <70 N (15.7 lb) Contact Retention Primary Only: 80 N (18.0 lb) Secondary Only: 60 N (13.5 lb) Vibration 32 g RMS Operating Temperature Range -40/+125C or +150C depending on PN 100 cycles, 1 hour per cycle Ingress Protection IP67 Durability (Mating Cycle) 20 cycles AIPG Part Number Description Additional Information Receptacle Plug 10-838275-000 2way Plug (Plug Body, Locking Collar, and Main Joint Seal) 125C Tru-Loc Splitter Receptacle for 6 Way Plugs 6 Way Tru-Loc Plug 10-838275-002 2way Plug (Plug Body, Locking Collar, and Main Joint Seal) 150C 44.5 10-707003-002 4way Plug (Plug Body, Locking Collar, and Main Joint Seal) 150C 15 20 3 10-707508-02X(X: A,B,C,D) 6way Plug (Plug Body, Locking Collar, and Main Joint Seal) 4 indexes available, 150C 2.8 10-707516-001 2way receptacle 150C 5.4 23 1.3 10-707517-001 4way receptacle 150C PORT 1 6 Places 5.5 10-707509-00X(X: A,B,C,D) 6way receptacle 4 indexes available, 150C 6 Places 10-838137-00D Wire seal (silicone) To be used with insulated wires with insulation between 1.8-2.5 mm 5.46 10-838137-01D Wire seal (silicone) To be used with insulated wires with insulation between 1.2-1.8 mm 10-730605-002 Stamped and formed female socket, Au+PdNi plating Crimps to wire from 0.8-1.3 sq. mm 0.65 2.2 SOCKET PRE-LOAD 10-707515-002 Stamped and formed male pin, Au+ PdNi plating Crimps to wire from 0.8-1.3 sq. mm RECESS 5.46 POSITION 10-707515-0M2 Machined male pin, Au+PaNi plating Crimps to wire from 0.8-1.3 sq. mm 10.92 10-730179-002 Stamped and formed female socket, Au+PdNi plating Crimps to wire from 0.5-0.8 sq. mm 10-730764-002 Stamped and formed male pin, Au+ PdNi plating Crimps to wire from 0.5-0.8 sq. mm 6 Way Tru-Loc C10-708354-000 Size 20 AWG hand crimp tool 120 Omh x 0.4 PORT 2 PORT 3 44.5 C10-730690-000 Size 16-18 AWG hand crimp tool Resistor Plug Watt Resister 15 20 (Dimensions are the 3 same as the standard * Socket Contacts are on reels of 4,200 pieces and pin contacts arePart Number on reels of 4000Description pieces 6 Way Tru-Loc Plug) * For Crimp Information please contact factory 23 C10-708354-000 Hand crimper with 20-22 AWG Die WIRE GROMMETS * Cable seals are sold separately and must be used in all C10-708360-000 6 Way Tru-Loc Dummy Plug cavities and on both sides of the connection system C10-708305-000 6 Way Tru-Loc Resistor Plug REAR OF PLUG FILLED C10-708353-000 6 Way Tru-Loc Plug, Gold Contacts for 20 AWG Wire WITH POTTING COMPOUND C10-729337-18P Tru-Loc Splitter Receptacle for 6 Way Plugs For additional information on the Amphe-Power family of connectors with RADSOK 5.46 Technology, please ask for our RADSOK Catalog (SL-391) or download it from the Catalogs Ask about our custom matched impedance cable with 2 sets of section of our website. 20AWG twisted pairs, each rated for 120 Ohms impedance. Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not 0.65 2.2 recommendations to infringe any patent. The user should assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors. SOCKET PRE-LOAD For additional information on RECESS Amphenols family of Tru-Loc products, please ask for our Tru-Loc data sheet (IDS-16) or 5.46 POSITION For further information on your individual application requirements, contact: Amphenol Corporation download it from our website in the Data Sheets section. 10.92 Asia: Europe: North America: Middle East: Amphenol Technology Shenzhen Ltd Amphenol Industrial Operations Amphenol Industrial Operations Europe Amphenol Middle East Enterprises FZE Block 5 Fuan 2nd Industrial Park For further information on your individual application requirements, contact: 180 N. Freeport Drive, Plant 4 Via Barbaiana 5 Amphenol Corporation Office C-37 PO Box 21107 Dayang Rd, Fuyong Baoan Nogales, AZ 85621 1-20020 Lainate (MI) Italy Ajman Free Zone, UAE North America: Europe: Middle East: Asia: Baoan, Shenzhen, China 518103 Tel: (520) 285-5130 Tel: +39 02 93254.204 Tel: +9 716-7422494 Amphenol Industrial Operations Amphenol Industrial Operations Europe Amphenol Middle East Enterprises FZE Amphenol Technology (Zhuhai) Co., Ltd. Tel: +86 755 2881 8389 Fax: (520) 285-5134 Fax: +39 02 93254.444 Fax: +9 716-7422941 180 N. Freeport Drive, Plant 4 Via Barbaiana 5 Office C-37 PO Box 21107 No. 63 Xin Han Road, San Zao Town Fax: +86 755 2991 8310 Email: info amphenol-aio.com Nogales, Email: teAZ 85621ch amphenol-aio.com 1-20020 Lainate (MI) Italy Ajman Free Zone, UAE Jin Wan District, Zhuhai City, China 519040 Email: jhussain amphenol-industrial.com Email: enquiry amphenol-aio.com Tel: (888) 364-9011 Tel: +39 02 93254.204 Tel: +9 716-7422494 Tel: +86 756-3989760 Fax: (520) 285-5134 Fax: +39 02 93254.444 Fax: +9 716-7422941 Fax: +86 756-3989768 Email: tech amphenol-aio.com Email: info amphenol-aio.com Email: jhussain amphenol-industrial.com Email: enquiry amphenol-aio.com