Smart Card Connectors with PCB Mount Wiping Contacts Series C702E with board locks, Page 32 Screw/Rivet mounting Page 36 PCB Mount Wiping Contact Smart Card dip solder pins and Connectors self-cleaning switch Typical applications for Smart Card Connectors with wiping contacts and PCB mounting are set top boxes, toll road trans- with board locks, Page 32 with board locks Page 36 poders, parking meters, utility metering dip solder pins, and dip solder pins systems, etc., where limited numbers of 3 mm stand-offs and mating cycles are specified. self-cleaning switch Design features with board locks, Page 33 with board locks, Page 37 Termination: dip solder pins or SMT dual plane, 2 x 8 contacts, SMT and self-cleaning self-cleaning card presence switch on dip solder pins and switch most models detecting final card position self-cleaning switch special shape of wiping contacts minimize card scratching and wear with board locks, Page 33 with board locks, Page 37 Versions acc. to EMV (see page 6) dip solder pins, SMT, self-cleaning switch dual plane version with 2 x 8 contacts for 3 mm stand-offs, self-cleaning and card guide chip up & down card handling, suitable for switch and card guide applications with short dwell time of the card with board locks, Page 34 with board locks, Page 38 dip solder pins, dip solder pins, self-cleaning switch and self-cleaning switch and Assembly instructions: card guide card guide Soldering conditions wave soldering: 260 C 10 s max. with board locks, Page 34,35 infrared reflow 230 C 30 s max. dip solder pins, (SMT versions only) self-cleaning switch, double decker 31C702E Smart Card Connectors with PCB Mount Wiping Contacts Description Contact position Termination Part No. with board lock and ISO Dip solder pin C702 10M008 272 4 self-cleaning switch, acc. to EMV BESTCKUNGSSEITE / COMPONENTS SIDE 8,7 (40) 6,7 42 +0,1 3,2 4,6 -0,0 0,4 40 50,5 0,1 S C4 C8 C3 C7 C2 C6 C1 C5 S 2,9 20 38,1 LEITERPLATTENDICKE / PCB THICKNESS = 1,4 - 1,68 C702E Smart Card Connectors with PCB Mount Wiping Contacts Description Contact position Termination Part No. with board lock and ISO Dip solder pin C702 10M008 255 4 self-cleaning switch and 3 mm stand-offs, acc. to EMV BESTCKUNGSSEITE / COMPONENTS SIDE (40) 10 +0,1 8,7 3,2 -0,0 0,1 6,7 5 PLATZBEDARF ZAPFEN 0,4 7,5 42 50,5 SPACE FOR GUIDING PIN 14 14 2,9 S C4 C8 C3 C7 C2 C6 C1 C5 S 40 20 3,5 17,3 17,3 LAGE DER ABSTANDSBOLZEN 38,1 POSITION OF STAND - OFFS LEITERPLATTENDICKE / PCB THICKNESS = 1,4 - 1,68 32 2,5 3 62,8 62,8 4 7 22,08 3 x 2,54 (=7,62) 22,08 3 x 2,54 (=7,62) 12,7 3,81 12,7 3,81 25,8 24,4 0,7 ISO ISO 26 24,3 +0,1 1 -0,0 3 0,1 +0,1 1 -0,0 58 0,1 (62,8) 58 (62,8)