CL90558C32412P Amphenol

1 www.amphenol-aerospace.com Product Data Sheet PDS-235 Amphenol Commercial Class L Wall Mount Receptacle MIL-DTL-22992 (power source) The Amphenol Class L heavy duty connectors are now available in a lower cost commercial version. The Class L meets the demands for heavy duty & heavy power connectors that are critical for rugged environmental conditions. Design features of Amphenol Class L provide: Greatest Capacity - Current ranges 40 to 200 amps, conductor sizes 6 to 4/0. Safety - Complete protection of personnel and equipment if connectors are inadvertently disconnected under load. Foolproof Mating - Design incorporates voltage, current, frequency, phase and grounding requirements Straight Plug Standardization - MIL-DTL-22992 Class L insert arrangements specify connector/ cable combinations for maximum reliability. Serviceable Contacts - Contacts are normally crimped to the cable before connector assembly. No insertion tools required. Bushings are available to adapt smaller diameter wires to larger contacts. Arc Quenching Design - Recessed socket contacts within the insert create an arc suppressing chamber which protects the user when connectors are separated under load. Programmed Coupling Sequence - Grounding and neutral contacts engage before power contacts. Waterproof Design - A unique combination of grommets and seals Cable Connecting provides waterproofing in any condition - mated or unmated, capped or uncapped. Receptacle without Coupling Ring Rugged Construction - Machined from high strength aluminum. Straight-line attachment of accessories eliminates possibility of cable twisting or misalignment. Accessories - Supplied with all Class L connectors as indicated on the individual connector descriptions. Replacement accessories may be ordered separately. Condition Configuration Description Reference MIL-STD-1344, Five complete on hour temperature Thermal Shock Unmated method 1003, cycles of 55C to +125C test condition A Moisture Ten complete 24 hour cycles of +25C to Resistance MIL-STD-202, Mated +65C temperature at 90% to 98% (Cable mounted method 106 humidity connectors) MIL- Durability Mated 500 complete mating/unmating cycles DTL-22992 Salt Spray 48 hour exposure to atomized 5% saline MIL-STD-1344, Unmated (Corrosion) solution at +35C method 1001 10 to 55 Hz, .06 inch total excursion in 1 MIL-STD-1344, Wall Mount Plug with Vibration Mated minute cycles for 6 hours, 55 to 2000 method 2005 Hz, 10G peak amplitude sweep Coupling Ring Nine hammer blows from 1, 3 and 5 feet, (equipment end) MIL-STD-202, High Impact Mated three each in three axes on mounting method 207 panel Heat Rise (Class Maximum rated DC current for four MIL- Mated L only) hours at +25C in still air DTL-22992 20 hours immersion in hydraulic fluid MIL- Fluid Immersion Unmated and lubricating oil DTL-22992 Contact Catalin Brandas for more Mated and 4 hours immersion at 1 atmosphere MIL- information at cbrandas amphenol-aao.com Water Immersion Unmated pressure differential DTL-22992 or call 607-563-5129 Amphenol The Interconnection Leader Aerospace Call 800-678-0141 or visit us at www.amphenol-aerospace.com2 Product Data Sheet Easy Steps to build a part number... Commercial Class L Series PDS-235 1. 2. 3. 4. 5. 6. 7. Commercial Shell Shell Alternate Master Key/ Insert Contact Alternate Insert Number Finish Size Keyway Position Arrangement Type Rotation CL90555* C 32 4 12 S Y Step 2. Select a Shell Finish Step 1. Select a Commercial Number Designates Designates CL90555 Wall Mount Receptacle (Power Source) C Conductive for AC circuits CL90556 Straight Plug N Non-conductive for DC circuits CL90557 Cable Connecting Receptacle without Coupling Ring Step 2. Select a Shell Finish CL90558 Wall Mount Plug with Coupling Ring (Equipment End) Grounding Assemblies: Finish C Non-grounding Assemblies: Finish N Shell Master Key/Keyway Position Shell Master Key/Keyway 60Hz & 400 Hz Position Current Current Shell 1 Phase 3 Phase Shell Rating Rating Size Size DC Amps 2 Wire 3 Wire 3 Wire 4 Wire Amps 2 Wire 120/240 450/480 120/208 240/416 277/480 120 VAC 240 VAC VAC VAC VAC VAC VAC 28 VDC 28 40 4 (120) 5 (135) 4 (120) 4 (120) 5 (135) 6 (150) 28 40 N (105) 32 60 4 (120) 5 (135) 4 (120) 4 (120) 5 (135) 6 (150) 32 60 N (105) 44 100 4 (120) 4 (120) 1 (60) 4 (120) 5 (135) 6 (150) 44 100 N (105) 52 200 4 (120) 4 (120) 5 (135) 6 (150) 52 200 N (105) 6 Step 3. Select a Shell Size - (related 5 Step 4. Select an Alternate Master 4 MASTER directly to current carrying capability) Key/Keyway Position if needed KEYWAY N Normal N designates normal position. Designates Current Carrying Capability 1 Positions 1, 4, 5 and 6 of the 28 40 amperes master key/keyway prevent cross- 32 60 amperes 15 mating of incompatible voltages. 44 100 amperes REF TYPICAL 52 200 amperes SOCKET front face of receptacle shown ARRANGEMENT Note that insert arrangement does not rotate with master key/keyway Step 6. Select a Contact Type Step 5. Select an Insert Arrangement Designates Contact Amphenol or see catalog 12-C Edition 4 P Pin Contacts Circular Interconnects for available insert S Socket Contacts arrangements for Class L connectors. Insert MS90555/CL90555 and MS90557/CL90557 are supplied with socket con- arrangements are determined by connector size tacts only. MS90556 /CL90556 and MS90558/CL90558 are supplied with (current carrying capability) and cable configuration pin contacts only. to be accommodated. *Commercial Numbers are supplied less protection caps and strain reliefs which can be added separately. Step 7. Select an Alternate Insert Rotation if needed Used to prevent cross-mating of incompatible frequencies. Absence of a letter in this space indicates Normal (0) position of the insert. See catalog 12-C Edition 4 Circular Interconnects refer to page 466. Amphenol Federal Vendor Identification FSCM77820 Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors. AMPHENOL is a registered trademark of Amphenol Corporation. Amphenol 2008 Amphenol Corporation Printed in U.S.A. 9/19/2008 Aerospace Call 800-678-0141 or visit us at www.amphenol-aerospace.com