Type CSP Thermometrics Laboratory NTC Temperature Standards The Type CSP Temperature Standards are Data ultrastable probe thermistors which have been calibrated to an accuracy of 0.01C. The standard Two types of CSP Thermoprobes are stocked for unit has a thin, conformal coating of silicone quick delivery: rubber over the entire unit this makes it suitable for immersion in a water bath. They are also The CSP60BA252M, with a nominal resistance available with stainless steel sensor housings, or of 2500 ohms 25C, is furnishedwith they can be encapsulated into various sheaths. calibration over the range of 0 to 50C. See assemblies depicted in the figure. The CSP60BT103M has a nominal resistance of 10K ohms 25C and is furnished with Applications calibration over the range of 0 to 100C. All units can be supplied with calibrations over The calibration table normally furnished with different temperature ranges, with longer leads the CSP60BA252M provides data every 0.25C and with various coatings. between 0 and 50C. The table furnished with the CSP60BT103M provides data every 0.5C over the range of 0 to 100C. Both units are furnished with interpolation equations which are accurate to 0.01C. Tables with calibration data furnished every 0.01, 0.05 or 0.1C are also available. Amphenol Advanced SensorsNominal Curve Nominal Curve for CSP60BA252M for CSP60BT103M Temperature C Resistance Ratio Temperature C Resistance Temperature C Resistance Temperature C Resistance R /R Ratio R /R Ratio R /R Ratio R /R T 25 T 25 T 25 T 25 0.00 2.84438 30.00 0.82461 0.00 2.94227 65.00 0.23773 5.00 2.28160 35.00 0.68340 5.00 2.33994 70.00 0.20279 10.00 1.84096 40.00 0.56913 10.00 1.87383 75.00 0.17368 15.00 1.49390 45.00 0.47620 15.00 1.51049 80.00 0.14932 20.00 1.21899 50.00 0.40025 20.00 1.22532 85.00 0.12886 25.00 1.00000 25.00 1.00000 90.00 0.11159 30.00 0.82084 95.00 0.09697 35.00 0.67752 100.00 0.08455 40.00 0.56219 45.00 0.46887 50.00 0.39295 55.00 0.33087 60.00 0.27985 Coding: Ordering Code Description CSP60BA252M Nominal resistance 2500 ohms 25C, calibration table every 0.25C between 0 and 50C CSP60BT103M Nominal resistance 10K ohms 25C, calibration table every 0.5C between 0 and 100C Options A113 - CSP60B = Standard in vinyl tubing (60C Maximum Temperature) A207A - CSP60B = Standard in open tip stainless steel housing. A733F - CSP60B = Standard in closed end stainless steel housing. Standard Configuration www.amphenol-sensors.com Amphenol 2014 Amphenol Corporation. All Rights Reserved. Specifications are subject to change without notice. Other company names and product names used in this document are the registered trademarks or Advanced Sensors trademarks of their respective owners. AAS-920-615A-03/2014