IDS-34-2 Amphenol ePower Connectors The ePower series of connectors are designed for the Features: demanding requirements of hybrid, electric vehicles, and Two or three circuit power utility truck electrical systems, operating at 800vdc to Crimp, lug or bus bar termination 1000vdc with a 200A to 500A rating. The product IP2X on pin and socket incorporates the patented RADSOK technology for higher Environmental IP67 rating amperage, lower T-rise, less resistance and mating force. Two HVIL circuits Meantime, it offers a 40% smaller footprint than three EMI 1,000vdc rating shielding cable glands and easier operation of termination 5.7mm - 14mm RADSOK technology for 200 to 500A with shielded cable by a washer compressing the shield to current capability the inside surface of the shell. The connector series covers 2 Strain relief for jacketed cable incorporated into shell or 3 power contacts. As an example, one ePower 400A Integrated EMI shielding connector can replace three conventional connectors, saving Excellent vibration resistance space and cost. All aluminum shell www.amphenol-industrial.comThe markets and application for the ePower series include but are not limited to the following found in both the Military Aerospace and Industrial segments: Power converters Hybrid electric vehicles Heavy equipment electrification Two and three phase motors Starter generators Receptacle Plug How to order 1 2 3 4 5 6 7 e P 2 2 25 1 1 Product line Connector Amp Level Number of Poles Wire Size Key Position Plating e ePower P Plug 2 200A 2 2 Pole BB Busbar (Receptacle Only) 1 Available in 2 & 3 Pole 1 Electroless Nickel 2 R Receptacle 4 400A 3 3 Pole 25 25 mm (200A Only) 2 Available in 2 & 3 Pole FG Tin over Nickel 2 35 35 mm (200A Only) 3 Available in 2 & 3 Pole B No Plating 2 50 50 mm (200A or 400A) 4 Available in 2 & 3 Pole 2 70 70 mm (400A Only) 5 Available in 3 Pole Only 2 95 95 mm (400A Only) 6 Available in 3 Pole Only 7 Available in 3 Pole Only 8 Available in 3 Pole Only The information contained in this data sheet is for reference only. Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors. AMPHENOL is a registered trademark of Amphenol Corporation. For further information on your individual application requirements, contact: Amphenol Corporation North America: Europe: Middle East: Asia: Amphenol Industrial Operations Amphenol Industrial Operations Europe Amphenol Middle East Enterprises FZE Amphenol Technology Shenzhen Ltd 180 N. Freeport Drive, Plant 4 Via Barbaiana 5 Office C-37 PO Box 21107 Block 5 Fuan 2nd Industrial Park Nogales, AZ 85621 1-20020 Lainate (MI) Italy Ajman Free Zone, UAE Dayang Rd, Fuyong Baoan Tel: (520) 285-5130 Tel: +39 02 93254.204 Tel: +9 716-7422494 Baoan, Shenzhen, China 518103 Fax: (520) 285-5134 Fax: +39 02 93254.444 Fax: +9 716-7422941 Tel +86 755 2881 8389 Fax +86 755 2991 8310 Email: tech amphenol-aio.com Email: info amphenol-aio.com Email: jhussain amphenol-industrial.com Email: enquiry amphenol-aio.com