FLA Series Dimming Receptacles, Caps and Gaskets DIMMING RECEPTACLES, CAPS AND GASKETS, FOR ROADWAY AND OUTDOOR LIGHTING FLA Series Dimming Receptacle - ANSI C136.41 is designed with power and dimming/signal contacts to provide a connection between dimmable photocell and the luminaire for commercial and utility lighting. The locking type receptacles are available in fixed or rotatable configurations and are compliant with ANSI C136.41 FLA Dimming Receptacles feature UL94V-0 high temperature resistant housings and are rated up to 15A per power contact. NEMA/ANSI FLA-C Caps are available with open circuit, short circuit and short circuit with MOV function. TARGET MARKETS FLA-2N Series mounting gaskets are also available in EPDM or Silicone Rubber versions for better water protection. 0, 2 or 4 dimming contacts options RoHS Compliant UL94V-0 high temperature resistant housing Operating temperature range from -40C to +85C FEATURES BENEFITS 0, 2 or 4 dimming contacts options Supports Power only, or power plus 1 or 2 sets of dimming and/or additional control functions UL94V-0 rated high temperature resistant housing Ensures application safety Receptacle comes pre-terminated with power wire ranging Ease of integration into new or existing light fixtures from 16AWG to 14AWG rated at 105C or 150C Rotatable configurations available Enhanced 360-degree alignment capability Tool-less rotatable configurations available Spring mounted, no tools required to install or adjust EPDM or Silicone Rubber gaskets available Silicone gasket provides higher temperature capability and enhanced set resistance Protective caps with shorting or non-shorting function and Ensure environmental protection in absence of a dimming/ integrated sealing gasket photocell module. RoHS compliant RoHS compliant Amphenol Information Communications and Commercial Products www.amphenol-icc.comFLA Series Dimming Receptacles, Caps and Gaskets TECHNICAL INFORMATION MATERIAL RECEPTACLE ELECTRICAL CHARACTERISTICS Housings: High temperature resistant thermoplastic, Power Contact Voltage Rating: 600V AC/DC UL94V-0 rated, black Power Contact Current Rating: 15A max. per circuit at 25C Material for Gasket: EPDM or silicone rubber Dimming Contact Voltage Rating: 30V DC Dimmable Contacts: Copper alloy plated with 0.76m Contact Resistance LLCR: 30m max. (30) min. gold over nickel Insulation Resistance: 500M min. at 500V DC test Dimmable Contact Wire: Copper with PVC insulation, UL voltage 10070, 18AWG Dielectric Withstanding Voltage: 2500V AC Power Contacts: Copper alloy plated with tin over nickel PACKAGING Power Contact Wire: Copper with PVC insulation, UL 10070, 14AWG or 16AWG Box MECHANICAL PERFORMANCE SPECIFICATION Thermal Shock: 25 cycles from -40C and 105C, per EIA- Amphenol Specification: S6143C 364-32 Mechanical Shock: 30 Gs, sine, 11ms, per EIA-364-27 ENVIRONMENTAL Humidity: Per EIA-364-31, Method IV, Cond. B, Omitting 7b RoHS compliant per EU directive 2011/65/EU and amendments Vibration with Load: 15A load, per EIA-364-28, Condition I Salt Spray: 240 hrs, per EIA364-26 APPROVALS & CERTIFICATION Durability: 25 cycles, per EIA-364-09 UL, Certification Number: E514916 Operating Temperature Receptacle : -40C to +85C TARGET MARKETS/APPLICATIONS Operating Temperature Gaskets: Roadway Lighting -40C to +50C (EPDM Rubber) Outdoor Lighting -40C to +150C (Silicone Rubber) Area Lighting Temperature Rise: 30C max T at rated current, per EIA- 364-70 Ingress Protection Ratings: IP66 (with approved gaskets and caps) Impact Rating: IK09/Top Side Disclaimer www.amphenol-icc.com Please note that the above information is subject to change without notice.