FLB Series Bases and Domes ANSI C136.41 COMPATIBLE BASES AND DOMES FOR ROADWAY AND OUTDOOR LIGHTING The FLB series base assembly provides a platform for a customer supplied PCBA providing photocell or other control functionality. The FLB base mates with the FLA series receptacle and utilizes twist lock technology to provide a secure, integrated power and signal interface solution for use in roadway and area lighting applications. The FLB series cover couples with the base to provide IP66 protection (per IEC 60529) for the mated photocell/ control assembly. All base assembly components meet the UL94V-0 flammability rating, and the cover meets the UL94-5VA flammability rating. TARGET MARKETS 0, 2 or 4 dimming contacts options RoHS Compliant Bases available in 76mm diameter Domes available in 35mm, 50mm, 60mm, 75mm, 100mm & 130mm heights Domes available in Grey, Clear, Red, Black, White and Translucent colors FEATURES BENEFITS 0, 2 or 4 dimming contacts options Supports power only, or power plus 1 or 2 sets of dimming and/or additional control functions UL94V-0 rated engineering thermoplastic bases and Meets critical safety standards UL94-5VA Polycarbonate domes RoHS compliant Meets environmental, health and safety requirement Vented and non-vented base options are available for Venting allows air pressure equalization while preventing moisture control moisture ingress to the photocell assembly Utilizes twist lock technology Provides securely latched power and signal interface Integrated mating gaskets and O-rings on the bases Ensures IP66 rating performance to protect equipment from moisture ingress Amphenol Information Communications and Commercial Products www.amphenol-icc.comFLB Series Bases and Domes TECHNICAL INFORMATION MATERIAL PACKAGING Bases: Engineering thermoplastic, UL94V-0 flammability Box rated SPECIFICATION Domes: Polycarbonate, UL94V-5V flammability rated Amphenol Specification: S6169C Mating Gasket: Self-adhesive EPDM/SILICONE foam rubber with self-adhesive, UL94V-0 flammability rating ENVIRONMENTAL O-Ring: Silicone rubber, UL94V-0 flammability rating RoHS compliant per EU directive 2011/65/EU and Dimming Contacts: Copper alloy plated with Nickel overall, amendments matte Tin on the tails and 0.76m Gold in the mating area APPROVALS & CERTIFICATION Power Contacts: Copper alloy plated with tin over nickel UL Pending MECHANICAL PERFORMANCE TARGET MARKETS/APPLICATIONS Thermal Shock: 25 cycles between -40C and +105C, per EIA-364-32 Roadway Lighting Mechanical Shock: 30 Gs, sine, 11 ms, per EIA-364-27 Outdoor Lighting Humidity: Per EIA-364-31, Method IV, Cond. B, Omitting 7b Vibration with load: 15 A load, per EIA-364-28, Cond. I Salt Spray: 240 hrs, per EIA364-26 Durability: 25 cycles, per EIA-364-09 Operating Temperature: -40C to 85C Temperature Rise: 30C max T rated current, per EIA- 364-70 Ingress Protection Ratings: IP66 (with approved domes) Impact Rating: IK09/Top Side and IK07 (side) ELECTRICAL CHARACTERISTICS Power Contact Voltage Rating: 600V AC/DC Power Contact Current Rating: 15A max. per circuit 25C Dimming Contact Current Rating: 1.5A max per circuit 25C, 30C max T Dimming Contact Voltage Rating: 30V DC Contact Resistance LLCR: 30m max. Insulation Resistance: 500M min. 500VDC test voltage Dielectric Withstanding Voltage: 2500V AC Disclaimer www.amphenol-icc.com Please note that the above information is subject to change without notice.