HM1F51TBP000H6LF Amphenol

TYPE NUMBER PRODUCT SPECIFICATION GS-12-177 TITLE PAGE REVISION Metral T Series Solder to Board Signal Receptacle 1 of 8 B AUTHORIZED BY DATE J.R. Volstorf 20-Sep-05 CLASSIFICATION UNRESTRICTED 1.0 OBJECTIVE This specification defines the performance, test, quality, and reliability of the T series solder to board signal receptacle, which is part of the Metral connector system. 2.0 SCOPE This specification is applicable to the termination characteristics of both the vertical and right angle T series solder to board signal receptacle. 3.0 GENERAL 3.1 Table of Contents 1.0 OBJECTIVE 2.0 SCOPE 3.0 GENERAL 3.1 Table of Contents 3.2 Band Substances 3.3 Manufacturing Processability 4.0 APPLICABLE DOCUMENTS 5.0 REQIREMENTS 5.1 Qualification 5.2 Materials 5.3 Contact Finish 5.4 Design and Construction 6.0 ELECTRICAL CHARACTERISTICS 7.0 MECHANICAL CHARACTERISTICS 8.0 ENVIROMENTAL CONDITIONS 9.0 QUALITY ASSURANCE PROVISIONS 9.1 Equipment Calibration 9.2 Inspection Conditions 9.3 Sample Quality and Description 9.4 Acceptance 9.5 Qualification Testing 9.6 Re-qualification Testing TABLE 1 Product Qualification Plan 3.2 Band Substances All products where the part number ends in LF meet the European Union directives and other country regulations as described in GS-22-008. The part numbers that do not end in LF meet all regulations except for Pb in SnPb plating. 3.3 Manufacturing Processability All products covered by this specification will withstand exposure to 260C for 60 seconds in a convection, infra-red or vapor phase reflow oven. Copyright 2005 FCI Form E-3334 GS-01-001 Rev B 06/06/05 V05-0553 PDM: Rev:B Released .STATUS: Printed: Nov 28, 2010TYPE NUMBER PRODUCT SPECIFICATION GS-12-177 TITLE PAGE REVISION Metral T Series Solder to Board Signal Receptacle 2 of 8 B AUTHORIZED BY DATE J.R. Volstorf 20-Sep-05 CLASSIFICATION UNRESTRICTED 4.0 APPLICABLE DOCUMENTS The following documents, of the issue in effect on the date of the latest revision to this specification, shall form a part of this specification to the extent specified herein. 4.1 FCI Specification 4.1.1 Engineering Drawings 4.1.1.1 SE96846 Standard 4 Row Right Angle Receptacle Product 4.1.1.2 SE96860 Standard 4 Row Vertical Receptacle Product 4.1.1.3 SE96847 Standard 5 Row Right Angle Receptacle Product 4.1.1.4 SE96872 Standard 5 Row Vertical Receptacle Product 4.2 Industry Product Specifications 4.2.1 IEC 61076-4-104 Printed Board Connectors With Assessed Quality Detail Specification for Two-Part Modular Connectors, Basic Grid of 2mm, With Terminations on a Multiple Grid of 0.5mm 4.2.2 EIA 616 2 Millimeter, Two-Part Connectors for Use with Printed Boards an and Backplanes 4.3 Industry Performance Standards and Procedures 4.3.1 Telcordia GR-1217-CORE Generic Requirements for Separable Electrical Connectors Used In Telecommunications Hardware 4.3.2 IEC 60512 Electromechanical components for electronic equipment Basic Testing Procedures and Measuring Methods 4.3.3 EIA-364 Electrical Connector / Socket Test Procedures Including Environmental Classifications 4.4 Military Standards 4.4.1 MIL-C-45662 Calibration System Requirement 4.5 Other Standards and Specifications 4.5.1 UL 94 Test for Flammability of Plastic Materials 4.5.2 ISO 9000 Quality System Requirements 4.6 Test Reports EL-2000-10-016 Copyright 2005 FCI Form E-3334 GS-01-001 Rev B 06/06/05 V05-0553 PDM: Rev:B Released .STATUS: Printed: Nov 28, 2010