Intelligent transmitter (iT) accessories The Intelligent Transmitter series of vibration transmitters, vibration alarms, and communication modules can be used to implement online vibration monitoring and simplified machinery monitoring and alarming. 4-20 mA output can be sent directly to the facilitys existing PLC or DCS for the most cost effective continuous vibration monitoring. Some of the most common processes to benefit from iT products are pharmaceutical, food and beverage, brewing, water and wastewater, petrochemical, pulp and paper, and power generation facilities. TBUS connectors TBUS connectors TBUS connectors are used to connect an iT Transmitter module to an adjacent alarm or communications module on the DIN-rail. The connection is needed in order to transfer data iT031 between iT100/200/300 series and iT400/500 series modules. Model Size Compatible modules iT031 17.5 mm iT100/200 series iT032 22.5 mm iT400 series iT033 TBUS extenders Extenders are used to gain access to the TBUS lines of a module. They are used with standalone iT401 modules. They are the only means of supplying power to an iT401 when iT034 not coupled to an iT transmitter or another iT401. Model Position extends Connector type Cable entry iT033 8 mm male receptacle left side horizontally iT035 iT034 8 mm female plug right side horizontally iT035 12 mm female plug right side vertically Terminal connectors Terminal connection plugs are supplied with all iT series modules and are for purchase of spare plugs. Model Position Compatible unit size Compatible modules iT041 3 17.5 mm iT100/200 series iT042 4 22.5 mm iT001/002/004 and iT400 series Covers The cover is a blank which is set on the space in the connector block where no terminal connection exists. Covers can be placed over unused connectors. Model Position Compatible unit size Compatible modules iT043 3 17.5 mm iT100/200 series iT044 4 22.5 mm iT001/002/004 and iT400 series For more information or to place an order, email info wilcoxon.com or call 1 800 WILCOXON Wilcoxon Sensing Technologies Tel: +1 (301) 330-8811 8435 Progress Drive Wilcoxon Sensing Technologies Frederick, MD 21701 Fax: +1 (301) 330-8873 info wilcoxon.com www.wilcoxon.com 78014 Rev.C.1 10/18DIN rail mounting equipment Terminal block Model Size Type Description iT053 5 mm end DIN rail mounted end-stops are used to keep mounted modules iT053 stop and blocks on the DIN rail from sliding. iT054 6.2 mm fused A fused terminal block is used to pass the AC mains line connec- terminal tion to the power supply. In the US, this is usually the black wire block for single phase power. The removable pull fuse can be used as a local point to disconnect when service is required within the DIN box. iT057 iT054 iT055 6.2 mm unfused An unfused terminal block is used to pass the AC mains neutral terminal connection to the power supply. In the US, this is usually the white block wire. iT056 6.2 mm ground Terminal block includes clamp to ground DIN rail and can be used terminal as end-stop. This block is used to pass the AC mains ground con- iT055 block nection to the power supply. In the US, this is usually the green wire. The block has no disconnect pull or fuse. iT057 5 mm fuse Spare fuse holder used in the iT054. The iT054 is shipped with holder one iT057. iT056 iT058 N/A marker Zack strip with custom L N G labeling (for Line, Neutral, and strip Ground) to use with iT054/055/056. Labels have the standard terminology for AC mains connections. Fuses Fast blow, glass fuses are used with iT power supplies, and fit into the iT057 fuse holder. Model Size Amp Compatible power supply iT061 5 x 20 mm 2.5 iT001 iT062 5 x 20 mm 5 iT002 iT064 5 x 20 mm 10 iT004 Lead extractor The lead (shield) extractor is a tool to aid in removing wires from braided shield cables. The tool speeds the preparation of the ends of braided shielded cables for wiring terminations. The lead extractor tools are sized to the outer diameter of cables. Model Wire size Compatible cabling iT074 <0.100 OD J5A, J6, J8, J61, J81, J81S iT075 <0.130 OD J9A, J9T2, J9T2A, J9T2AS, J9T3, J10, J11 Screwdriver Model Description iT077 Small screwdriver for use with the module terminal block screws, large grip and small shank Power cord Model Description iT099 120 VAC, 6 power cord (US outlets), uses standard 120 VAC 3-prong plug termination Wilcoxon Sensing Technologies Tel: +1 (301) 330-8811 8435 Progress Drive Wilcoxon Sensing Technologies Frederick, MD 21701 Fax: +1 (301) 330-8873 info wilcoxon.com www.wilcoxon.com 78014 Rev.C.1 10/18