TIMES MICROWAVE SYSTEMS LMR 100A Flexible Low Loss Communications Coax Ideal for Drop-in Replacement for RG-316/RG-174 (uses standard connectors) Jumper Assemblies in Wireless Communications Systems Short Antenna Feeder runs Any application (e.g. WLL, GPS, LMR, WLAN, WISP, WiMax, SCADA, Mobile Antennas) requiring an easily routed, low loss RF cable Construction Specifications Part Description Stock Description Material In. (mm) Part Number Application Jacket Color Code Inner Conductor Solid BCCS 0.018 (0.46) LMR-100A-FR Indoor/Outdoor-FR FRPE Black 54037 Dielectric Solid PE 0.060 (1.52) LMR-100A-PVC Indoor/Outdoor PVC Black 54119 Outer Conductor Aluminum Tape 0.065 (1.65) LMR-100A-PVC-W Indoor/Outdoor PVC White 54200 Overall Braid Tinned Copper 0.083 (2.11) LMR-100A-UF Indoor TPE Black 54274 Jacket See Table 0.110 (2.79) LMR-100-PUR Indoor PUR Black 54363 PVC = Poly Vinyl Chloride Attenuation vs. Frequency (typical) 100 10 1 10 100 1,000 10,000 Frequency (MHz) Frequency (MHz) 30 50 150 220 450 900 1500 1800 2000 2500 5800 80000 Attenuation dB/100 ft 3.9 5.1 8.9 10.9 15.8 22.8 30.1 33.2 35.2 39.8 64.1 77.3 Attenuation dB/100 m 12.9 16.7 29.4 35.8 51.9 74.9 98.7 109.0 115.5 130.6 210.3 253.8 Avg. Power kW 0.230 0.180 0.100 0.083 0.057 0.039 0.029 0.027 0.025 0.022 0.013 0.01 Calculate Attenuation = (0.709140) FMHz + (0.001740) FMHz (interactive calculator available at TIMES MICROWAVE SYSTEMS Environmental Specifications Electrical Specifications 0 o Performance Property F C Performance Property Units US (metric) Installation Temperature Range -40/+185 -40/+85 Velocity of Propagation % 66 Storage Temperature Range -94/+185 -70/+85 Dielectric Constant NA 2.30 Operating Temperature Range -40/+185 -40/+85 Time Delay nS/ft (nS/m) 1.54 (5.05) Impedance ohms 50 Capacitance pF/ft (pF/m) 30.8 (101.1) Mechanical Specifications Inductance uH/ft (uH/m) 0.077 (0.25) Performance Property Units US (metric) Shielding Effectiveness dB >90 Bend Radius: installation in. (mm) 0.25 (6.4) DC Resistance Bend Radius: repeated in. (mm) 1 (25.4) Inner Conductor ohms/1000ft (/km) 81.0 (266) Bending Moment ft-lb (N-m) 0.1 (0.014) Outer Conductor ohms/1000ft (/km) 9.5 (31.2) Voltage Withstand Volts DC 500 Weight lb/ft (kg/m) 0.0092 (.014) Jacket Spark Volts RMS 2000 Tensile Strength lb (kg) 15 (6.8) Peak Power kW 0.6 Flat Plate Crush lb/in. (kg/mm) 10 (0.18) 2 1 3 4 TC-100-NF TC-100-SM TC-100-TM TC-100-NM 3190-3030 3190-1551 3190-1552 3190-3029 Inner Outer Finish* Connectors Par t Stock VSWR ** Coupling Contact Contact Body Length Width Weight Interface Description Number Code Freq. (GHz) Nut Attach Attach /Pin in (mm) in (mm) lb (g) 1. SMA Male Straight Plug TC-100-SM 3190-1551 <1.25:1 (3) Hex Solder Crimp SS/G 1.0 (25.4) 0.32 (8.1) 0.015 (6.8) 2. TNC Male Straight Plug TC-100-TM 3190-1552 <1.25:1 (3) Knurl Solder Crimp S/G 1.4 (35.6) 0.59 (15.0) 0.045 (20.4) 3. N Female Straight Jack TC-100-NF 3190-3030 <1.25:1 (3) N/A Solder Crimp A/G 1.3 (32.4) 0.62 (15.8) 0.055 (25.0) 4. N Male Straight Plug TC-100-NM 3190-3029 <1.25:1 (3) Hex Solder Crimp A/G 1.1 (28.2) 0.9 (22.6) 0.066 (30.0) * Finish metals: N=Nickel, S=Silver, G=Gold, SS=Stainless Steel, A=Alballoy **VSWR spec based on 3 foot cable with a connector pair Install Tools Type Part Number Stock Code Description Crimp Tool CT-240/200/195/100 3190-667 Crimp tool for LMR-100, 195, 200 and 240 connectors Cutting Tool CCT-02 3192-165 Cable end flush cut tool Replacement Blade RB-02 3192-166 Replacement blade for cutting tool CT-240/200/195/100 - 3190-667 CCT-02 3192-165 (800) TMS-COAX www.timesmicrowave.com 11 LMR-100A