LP18-240 Silverline 041594 4/29/2016 11:47 AM Page 1 ISO 9001 Certified Times Protect LP-18-240-N Connector Protector Eliminates the Need for Separate Cable Connector Attaches Directly to LMR -240 Cable Uses EZ-240-X (No Braid Trim) Connector Interface DC Pass Multi-Strike Broadband Bidirectional Design Fully Weatherized Housing Solid Brass Construction White Bronze Plated for Cable Connector and Durability and Long Life Lightning Protector in One The Times Protect LP-18-240-N series is an exceptional in-line broadband DC pass surge protection design incorporating lightning protection circuitry and the EZ-240-X series crimp style connector interface unit. This combination allowing the in-line surge protector to be attached directly to the LMR -240 cable eliminates the cable connector needed when using conventional lightning protectors. The LP-18-240-N series protectors exhibit outstanding RF performance over the entire frequency spectrum from DC through 6000MHz and the elimination of the extra connector further reduces return loss, insertion loss and lowers cost. In addition, its fully weatherized housing meets the IP-67 standard for outdoor as well as indoor installation. LP-18-240-N Series: LP-18-240-NF-X (150W) N Female connector on one side and EZ-240-X crimp style interface on the other side - bidirectional LP-18-240-NMH-X (150W) N Male connector on one side and EZ-240-X crimp style interface on the other side - bidirectional The LP-18-240-N series protectors install easily onto LMR-240 cable using the standard CST-240A (3192-152) prep tool and either the CT-240/200/195/100 (3190-667) crimp tool or the An Amphenol Company HX-4 crimp handle (3190-200) with the Y375 (0.255) hex dies (3190-608).LP18-240 Silverline 041594 4/29/2016 11:47 AM Page 2 Times-Protect Electrical Specifications Impedance 50 Frequency Range DC-6000 MHz VSWR/Return Loss < 1.3:1 / <18dB (DC-6000MHz) Insertion Loss <0.6dB (DC-6000MHz) 10kA multiple (8x20 s wave-form) Maximum Surge Current LP-18-240-NF-X Impulse Sparkover 700V (1kV/ s) DC Pass N Type Female Turn on 180Vdc Average Power 150 Watts Protection Circuit DC Pass Mechanical / Environmental Specifications Temp Range Storage/Operating -40C - +85C IEC 60068 40/085/21 & IP67 Weatherization Thermal Shock US MIL-STD 202, Meth.107,Cond.B LP-18-240-NMH-X Vibration US MIL-STD 202, Meth.204,Cond.B DC Pass N Type Male US MIL-STD 202, Meth.213,Cond.I Shock *All Dimensions shown in inches RoHS Compliant Yes 500 minimum Wear/Mating Cycles Installation Tools: 7 to 10 in-lb Recommended Coupling Nut Torque CST-240A (3192-152) Prep Tool 3.4 oz / 95 grams Unit Weight CT-240/200/195/100 (3190-667) Crimp Tool or Material Specifications HX-4 Crimp Tool with Y375 (0.255) hex dies Component Material Plating Brass Body White Bronze CST-240A Brass Silver Inner Conductor Male Inner Conductor Female Phosphor Bronze Silver Washer Brass White Bronze Coupling Nut Brass White Bronze Insulator PTFE -- CT-240/200/195/100 HX-4 and Y375 -- O-Ring Silicone Rubber Note: IL and RL data without LMR cable World Headquarters: 358 Hall Avenue, Wallingford, CT 06492 Tel: 203-949-8400, 1-800-867-2629 Fax: 203-949-8423 International Sales: (800) 867-2629 (203) 949-8423 China Sales: No. 318 Yuan Shan Road, Shanghai 201108 China Tel: 86-21-51761234 Fax: 86-21-64424098 www.timesmicrowave.com LP-18-240 12/14 2012, Times Microwave Systems, Wallingford, CT 06492