NOTES: THIRD ANGLE PROJ. REVISIONS REV DESCRIPTION DATE ECO APPR 1. MATERIALS AND FINISHES (PLATING THICKNESS IN MICROINCHES): -- RELEASE TO MFG. ------ ------ BODY - BRASS, SILVER PLATING (200 MIN THICK) WASHER - BRASS, SILVER PLATING (200 MIN THICK) W REDRAWN IN PRO-E & UPDATED NOTES , ADD COD 9/20/13 49679 RV SHELL - BRASS, SILVER PLATING (200 MIN THICK) FERRULE - COPPER, SILVER PLATING (200 MIN THICK) CONTACT - BRASS, GOLD PLATING (100 MIN THICK) 0 .593 0.010 SPRING - BeCu, NICKEL PLATING (100 MIN) INSULATOR - PTFE 0.437 0.010 0.156 GASKET - SILICONE RUBBER REF 0.343 0.010 2. ELECTRICAL: YELLOW RED A. IMPEDANCE: 50 OHM 3. MECHANICAL: A. DURABILITY: 500 CYCLES MIN. B. TEMPERATURE RANGE: -65 C TO +165 C SCALE 2.000 4. PACKAGING: A. QUANTITY: SINGLE PACK CONTACT COLOR BANDS RECOMMENDED CABLE B. MARKING: BAG TO BE MARKED STRIPPING DIMENSIONS AMPHENOL, 31-4427, AND DATE COD 5. CABLE ASSEMBLY INSTRUCTIONS: MIL-C-39012 INSPECTION A. TRIM CABLE AS SHOWN. B. INSERT CABLE CENTER CONDUCTOR TO CONTACT. C. SOLDER CONTACT TO CABLE OR CRIMP CONTACT TO CABLE. WHEN CRIMPING CONTACT TO CABLE, CRIMP WITH AMPHENOL TOOL 227-944 (M22520/5-01) AND DIE SET 227-1221-11, CAVITY B (M22520/5-11 CLOSURE B ), .068 HEX DIE. D. INSERT CABLE INTO CONNECTOR WITH BRAID OVER KNURL UNTIL IT BOTTOMS. 0.936 REF. E. CRIMP FERRULE WITH AMPHENOL TOOL 227-944 (M22520/5-01) AND DIE SET 227-1221-11, CAVITY A (M22520/5-11, CLOSURE A ), .213 HEX DIE. 0.570 REF 6. SHOWS CABLE ENTRY DIMENSIONS. 0.09 REF 0.125 0.043 COLOR BANDS NOT SHOWN 0.250 REF 0.220 INTERFACE PER MIL-STD-348 SERIES: BNC PLUG. FERRULE CONTACT 0.500 REF 0.478 REF BODY STAMPM39012/16-0503 74868 XXX (4 DIGIT DATE CODE, YEAR/WEEK) THIS CONNECTOR IS COVERED BY U.S. PATENT 3,336,563. UNLESS OTHERWISE SPECIFIED, DIMENSIO NS ARE IN INCHES AND TOLERANCES ARE: MATERIAL DATE DRAWN TITLE 2 PLACE DECIMAL 3 PLACE DECIMAL ANGLES 09-Aug-13 RAJAVIJAYAN S .015 (0,381 mm) .005 (0,127 mm) 1 Amphenol RF BNC PLUG MIL-CRIMP SEE NOTES NOTICE - These drawings, specifications, or other data (1) are, and remain the ENGINEER DATE (CATEGORY D) property of Amphenol corp. (2) must be returned upon request and (3) are www.amphenolrf.com D. ROYCE 28-Mar-91 confidential and not to be disclosed to any person other than those to whom they FOR RG 142 & 400/U CABLE are given by Amphenol Corp. the furnishing of these drawings, specifications, or REFERENCE APPROVED DATE other data by Amphenol Corp., or to any other person to anyone for any purpose is DRAWING NO.31-4427 not to be regarded by implication or otherwise in any manner licensing, granting K. CAPOZZI 8/28/13 SCALE: 5.0:1.0 SHEET 2 OF 2 rights to permitting such holder or any other person to manufacture, use or sell any MIL-C-39012/16-0503 ITEM NO.31-4427 product, process or design, patented or otherwise, that may in any way be related to DWG SIZE CAD FILE REV or disclosed by said drawings, specifications, or other data. PART NO.31-4427 FINISH B W