MRJ Rugged RJ45 Connector Product Specification S6043C Rev 1.0 About Amphenol Commercial Products Amphenols commercial connector products are used in a variety of end user applications MRJ-5480-01 SHOWN including networking, VERTICAL, PCB TAIL, telecom, server & 8 POSITION RJ45 computer, storage & HDD, consumer electronics and entertainment, professional audio & Industrial & Military/Aerospace. With matching RJ45 MRJ-5380-01 SHOWN RIGHT ANGLE, PCB TAIL, 8 POSITION RJ45 With Cable Header Overview This Product Specification defines the general use and performance parameters for Amphenols MRJ series of connector. Availability: Right angle PCB tail termination with 8 or 10 positions, LED options, EMI ferrite filtering and PCB options (with matching RJ connector, cable header, terminal block or for hand wiring). Vertical PCB tail termination with 8 positions and LED options. Both termination styles With Terminal Block have dust covers for enhanced mating area protection. A clear rubber boot for use with standard plugs is also available. Usage The connector system is designed to provide a standard RJ45 interface, ideal for harsh environments where Ethernet/IP protocol is used. Protection is provided for IP67 applications per IEC 60529 specification. Data rates conform to Gigabit Ethernet (1000Base-T) protocols. With PCB for wiring Applications Intended for use in applications such as: Medical equipment Military vehicles, radios, computers ATM machines Test equipment Lottery terminals & slot Mobile communication systems machines Traffic control & monitoring systems GPS positioning equipment Revision date: May 04, 2011 Page 1 of 3 S6043C Rev 1.0 Connector Electrical Characteristics About Amphenol Current rating: 1.5A per contact Commercial Products Amphenols commercial Contact resistance: 30 m max connector products are Insulation Resistance: 500 M min used in a variety of end Dielectric Withstand Voltage: 1000/1500 V AC sea level user applications LED forward DC current: 25mA max including networking, telecom, server & LED forward Voltage: 2.5 Volts max. 20mA computer, storage & Minimum Impedance (Ferrite): 38 Ohms at 25 MHz HDD, consumer electronics and entertainment, Connector Mechanical Characteristics professional audio & Thermal Shock: 25 cycles -40 to +70 C Industrial & Physical Shock: Per EIA364-27, Condition H (11ms 30G) Military/Aerospace. Humidity: Per EIC512-6 / EIA364-11A Vibration: Per EIA364-28, Condition 5A Related Products Salt spray: Per EIA364-26, 250 Hrs Mating cycles: 2500 MDB Assembly Process Characteristics Recommended Torque for Panel Mount Screws: 0.45 to 0.65 Nm (4.00 5.75 in-lbs). Hand or wave solder: 150C for 180 seconds (Pre-heat) and 265C for 8 seconds max (Solder tails). Solder tails suitable for PCB thickness of 1.57 to 3.18 mm (.062 to 0.125) Material Requirements MRJ connectors are RoHS compliant. 9 POSITION CONNECTOR SHOWN Unless otherwise specified, the materials for each component shall be: MUSB Contacts: Phosphor Bronze with 1.27m (50) min Gold over 1.27m (50) min Nickel Housing: High temperature thermoplastic, UL94V-0 rated, Black Front Housing: Clear Polycarbonate (customer process cleaners must be compatible) Shell: Die cast Zinc alloy, Nickel plating Gasket: Silicone rubber LED: Epoxy lens, Tin plating on steel tail MUSB-B151-34 SERIES MINI-B, RIGHT Temperature rise: Meets the requirement of 30 C T ANGLE SHOWN Operating temperature -40 to +105 C Available Documents Drawing Numbers: P-MRJ-53XX-X1 MRJ Receptacle, Right Angle, 8 or 10 position P-MRJ-548X-X1 MRJ Receptacle, Vertical, 8 position P-MRJ-55XX-X1 MRJ Receptacle, Right Angle on PCB with Right Angle Cable Header P-MRJ-578X-X1 MRJ Receptacle, Right Angle on PCB with RJ connector P-MRJ-59XX-X1 MRJ Receptacle, Right Angle on PCB with Terminal Blocks P-MRJ-63XX-X1 MRJ Receptacle, Right Angle, EMI filtered P-MRJ-758X-X1 MRJ Receptacle, Right Angle on PCB with Transient Voltage Protection and Cable Header MUSB-C111-30 SERIES A, RIGHT ANGLE, Contact Factory, authorized Amphenol representative or website www.amphenolcanada.com for additional configurations STACKED SHOWN QTR9300376 Quality Test Report Amphenol Canada Corp. Page 2 of 3 605 Milner Avenue Toronto, Ontario, Canada, M1B 5X6 Copyright Amphenol Corporation 2011 All rights reserved +1 416 291 4401 www.amphenolcanada.com THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY PURPOSE OR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM AMPHENOL CANADA CORP.