MRJR Rugged RJ45 Connector Product Specification S6055C Rev 1.0 About Amphenol Commercial Products Amphenols commercial connector products are used in a variety of end user applications including networking, telecom, server & computer, storage & HDD, consumer electronics and entertainment, professional audio & Industrial & Military/Aerospace. MRJ/MRJR Options: With matching RJ45 MRJR-5381-01 SHOWN RIGHT ANGLE, PCB TAIL, 8 POSITION RJ45 With Cable Header Overview This Product Specification defines the general use and performance parameters for Amphenols MRJR series of connector. Availability: Right angle PCB tail termination with 8 or 10 positions, LED options, EMI ferrite filtering and PCB options (with matching RJ connector, cable header, terminal block or for hand wiring). Vertical PCB tail termination with 8 positions and LED options. Dust covers are available With Terminal Block for enhanced mating area protection. A clear rubber boot for use with standard plugs is also available. Usage The connector system is designed to provide a standard RJ45 interface, ideal for harsh environments where Ethernet/IP protocol is used. Protection is provided for IP68 applications per IEC 60529 specification. Data rates conform to 10BaseT or 100BaseT Ethernet. With PCB for wiring Applications Intended for use in applications such as: Medical equipment Military vehicles, radios, computers ATM machines Test equipment Lottery terminals & slot Mobile communication systems machines Traffic control & monitoring systems GPS positioning equipment Revision date: May 2, 2012 Page 1 of 3 Connector Electrical Characteristics About Amphenol Current rating: 1.5A per contact Commercial Products Amphenols commercial Contact resistance: 30 m max connector products are Insulation Resistance: 500 M min used in a variety of end Dielectric Withstand Voltage: 1000/1500 V AC sea level user applications LED forward DC current: 25mA max including networking, telecom, server & LED forward Voltage: 2.5 Volts max. 20mA computer, storage & Minimum Impedance (Ferrite): 38 Ohms at 25 MHz HDD, consumer electronics and Connector Mechanical Characteristics entertainment, professional audio & Thermal Shock: 25 cycles -40 to +70 C Industrial & Physical Shock: Per EIA364-27, Condition H (11ms 30G) Military/Aerospace. Humidity: Per EIC512-6 / EIA364-11A Vibration: Per EIA364-28, Condition 5A Related Products Salt spray: Per EIA364-26, 250 Hrs Mating cycles: 2500 MDBR Assembly Process Characteristics Recommended Torque for Panel Mount Screws: 0.45 to 0.65 Nm (4.00 5.75 in-lbs). Hand or wave solder: 150C for 180 seconds (Pre-heat) and 265C for 8 seconds max (Solder tails). Solder tails suitable for PCB thickness of 1.57 to 3.18 mm (.062 to 0.125) Material Requirements MRJR connectors are RoHS compliant. 9 POSITION CONNECTOR SHOWN Unless otherwise specified, the materials for each component shall be: MUSB Contacts: Phosphor Bronze with 1.27m (50) min Gold over 1.27m (50) min Nickel Housing: High temperature thermoplastic, UL94V-0 rated, Black Front Housing: Clear Polycarbonate (customer process cleaners must be compatible) Shell: Die cast Zinc alloy, Nickel plating Gasket: Silicone rubber LED: Epoxy lens, Tin plating on steel tail MUSB-B151-34 SERIES MINI-B, RIGHT Temperature rise: Meets the requirement of 30 C T ANGLE SHOWN Operating temperature -40 to +105 C Available Documents Drawing Numbers: P-MRJR-5380-011 MRJR Receptacle, Right Angle, 8 position, Special Gasket and Seal Features P-MRJR-5381-012 MRJR Receptacle, Right Angle, 8 position, LED, 2-56 Threaded Holes for PCB Mounting P-MRJR-53XX-X1 MRJR Receptacle, Right Angle, 8 or 10 position, LED, Tail Length and Thread Options P-MRJR-5E80-031 MRJR Receptacle with 2 MUSB Type A Receptacles, Solder Cup Terminals Contact Factory, authorized Amphenol representative or website www.amphenolcanada.com for additional configurations STACKED TYPE A OVER TYPE A QTR9300463 Qualification Test Report Revision date: May 2, 2012 Page 2 of 3