PT04A-8-2S Amphenol

26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I Amphenol PT/PT-SE MIL-DTL-26482 Series I MATES WITH ITT CANNON AND SOURIAU MIL-DTL-26482 The Amphenol MIL-DTL-26482 Series I PT/PT-SE offers high-density contact arrangements in a circular shell. PT offers solder contacts, PT-SE offers high- performance crimp contacts, and PT-CE offers a commercial crimp option. These circular connectors provide quick-disconnect bayonet coupling for rapid mating and unmating, and several mounting styles and shell sizes. Intermateable, intermountable and interchangeable with all MIL-DTL-26482 connectors APPLICATIONS Power generators Off-road vehicles Industrial machinery Engines Earth-moving equipment Telecommunications Sensors Ships Traffic control Motion control Mobile equipment FEATURES RUGGED SHELL Aluminum alloy shell and hardware create a rugged connector with minimal weight. These connectors have been used extensively in commercial, military, and aerospace environments. Standard shells accept all MIL-DTL-26482 accessories. ENVIRONMENTALLY-SEALED Complete moisture sealing is achieved by combining four seals: shell, peripheral, interfacial, and wire. Wire seal is accomplished by multiple ripple design, exceeding the wire sealing requirements of MIL-DTL-26482. RESISTANT TO MILITARY ENVIRONMENTS These connectors will operate in temperatures from -67F to +257F (-55C to +125C) under the harshest possible conditions. WIDE RANGE OF WIRE GAUGES AND CURRENT-CARRYING CAPACITY Up to 23 amps with wire gauges from 24 to 12 AWG wire. RESILIENT INSULATOR & GROMMET A resilient neoprene insulator and integrated rear wire sealing grommet guarantees a liquid-tight assembly. Crimp contacts that can be inserted from the rear of the connector are available. Solder contacts are permanently bonded into the insulator. SOLDER OR CRIMP GOLD-PLATED CONTACTS PT connector contacts are gold-plated per MIL-G-45204 type II. PT-CE commercial crimp contacts are not military-approved, but the PT-SE crimp contacts are built in accordance to MIL-C-39029. Both types of contacts are crimped with the standard M22520/1 crimp tool. Socket contacts are closed to eliminate damage from test probes and to help prevent misaligned pins during engagement. Contact insertion is from the rear of the connector. When the contact is fully inserted, it snaps securely into retention tines embedded in the insulator. Contact extraction is accomplished from the front with the proper extraction tool. Pressing the tool plunger pushes the contact out through the rear of the connector. AGENCY APPROVALS MIL-DTL-26482 UL E115497, for solder contacts only For assistance in Europe and China, please see the back cover for a complete listing of our branch offices and contact numbers. 123 Specifications subject to change. 26482 - AMPHENOL PT/PT-SE MIL-DTL-26482 SERIES I TECHNICAL MATERIALS & FINISHES SPECIFICATIONS Shell Aluminum alloy Plating Anodic coating (alumilite), olive drab chromate over cadmium over nickel, electroless nickel, olive drab zinc, non-conductive black zinc, conductive black zinc and gray zinc nickel Contacts Copper alloy Platings Gold-plated, 50 microinches minimum per MIL-G-45204 type II. Insulator Resilient neoprene. PT-SE and PT-CE insulators encase a tough plastic wafer with contact retention tines for high-reliability retention of crimp contacts. ELECTRICAL DATA Operating Voltage & Test Voltage TEST VOLTAGE MAXIMUM OPERATING VOLTAGE SERVICE TEST RATING* ALTITUDE DC AC (RMS) DC AC (RMS) 1 850 600 2,100 1,500 Sea Level 2 1,400 1,000 3,200 2,300 1 400 300 535 375 70,000 feet 2 600 450 700 500 * Each insulator layout has a specific service rating. The service ratings for each layout are listed on pages 127, 129-131. a Current Rating POTENTIAL DROP CONTACT SIZE RATED CURRENT TEST CURRENT (MILLIVOLTS) AMPS (MAX.) AMPS (WORKING) INITIAL 20 13 7.5 < 55 16 22 13 < 50 12 41 23 < 42 Wire Range Sizes 24 to 12 AWG (and coax) Contact Resistance When tested to MIL-STD-1344 Method 3004, will not exceed voltage drops listed in table. Consult MIL-DTL-26482, 3.6.4 for details. Insulation Resistance 5,000 megohms minimum at 77F (25C) MECHANICAL Operating Temperature -67F to +257F (-55C to +125C) Sealing 48 hours in 6 feet of water per MIL-DTL-26482 4.6.14. Meets 10- and 20-day 50-95% humidity testing per MIL-STD-1344 Method 1002.2 per MIL-DTL-26482. Wire Sealing Range: Per MIL-DTL-26482 1.4 INSULATION OUTSIDE DIAMETER LIMITS: INCHES (MM) CONTACT AWG WIRE SIZE SIZE MIN. (PT) MIN. (PT-SE/PT-CE) MAX. (PT/PT-SE/PT-CE) 20 24, 22, and 20 .047 (1.19) .047 (1.19) .083 (2.11) 16 20, 18, and 16 .066 (1.68) .066 (1.68) .109 (2.77) 12 12 and 14 .097 (2.46) .097 (2.46) .142 (3.61) For assistance in North America: +1 800.675.1214 www.peigenesis.com sales peigenesis.com 124