RNJ LOW PROFILE Harsh Environment Rack & Panel Cylindrical Connectors AmphenolRNJ LOW PROFILE <<< INTRODUCTION Realignment capability Mechanical device ensures axial (+/-1mm), angular (+/-6) and longitudinal (0.5 mm) realignments (See gure 1) Many insert patterns All available Amphenol Mil-DTL-38999 III inserts Large contacts range M39029 contacts compatible with Mil-DTL-38999 III 22D, 20, 16, 12, 8, 4 (contact cavities for signal, coaxial, twinax, power contacts) EMI shielding Grounding ngers ensure shielding before contact mating Low prole and high density Til 128 size 22D contacts in a 25 shell size Shell sizes range 8 shell sizes from 11 to 25 RNJ Low Prole rack and panel connectors are designed to connect electrical devices Temperature range between a moving unit (rack) and a xed - 65C to 175C for olive drab cadmium & 200C for electroless nickel unit (panel). High durability The locking of the mating pair is ensured by 500 cycles minimum the mechanical device of the rack. The RNJLP design allows a short distance High corrosion resistance between the two panels. This is a big Olive drab cadmium (500 hours salt spray) or electroless nickel (48 hours salt benet for the systems where space is an spray) issue. Low tooling investment Numerous tools common with Mil-DTL-38999 series III connector ones The RNJLP realignment capability (as Light weight shown in gure 1) allows to make up the Aluminium alloy shells. For the plug : 20% weight saving versus standard RNJ tolerances of the system. version RNJLP are primarily designed for Environmental avionic/military and advanced industrial Rear membrane protected by a cap on the plug, interfacial seal on male insert application. Sealing Reinforced membrane on the oating plug ensures high pressure resistance (plug Applications : withstands 1000mBars on the rear face, 2000mBars on the front face) < Commercial & military avionic packaging < Ground / marine / defence applications Rear accessory possibility < Advanced industrial applications Fully compatible with all M-85049 backshells for Mil-DTL-38999 series III Contacts protection 100% scoop proof design Figure 1 - Floating features Axial alignment Angular alignment Longitudinal alignment Axial alignment Angular alignment 0,5 mm compression +/ 1 mm + - 6 0,5 +/ 1 mm 2