SF9321-60086 Amphenol

REVISION HISTORY ROHS COMPLIANT REV DESCRIPTION DATE APPROVED CUI BASIC - NRN 42359 06/18 DAL A 06/18 JDT DCN 47627 PRODUCT DATA DRAWING HOLE CHART D4 D3 D2 D1 HOLE No. X Y ORIGIN 0.000 0.000 C2 C3 C1 A1 0.423 0.217 A2 0.200 0.217 A3 -0.023 0.217 B3 B2 B1 0.584 0.365 B4 B1 B2 0.315 0.408 B3 0.085 0.408 B4 -0.184 0.365 A3 A2 A1 C1 0.476 0.557 C2 0.200 0.600 Y C3 -0.076 0.557 D1 0.584 0.749 D2 0.362 0.749 D3 0.038 0.749 D4 -0.184 0.749 X ORIGIN MATERIAL: NOTES: 1. USES 3221-40066 CONTACT OR SIMILAR. BODY: STAINLESS STEEL PER AMS-5640, ALLOY UNS S30300, TYPE 1 2. MATES TO SF9301-60042 OR SF9311-60147 PLUG-IN MODULE. OR ASTM A582 TYPE 303, COND. A DIMENSIONS ARE IN INCHES TOLERANCES: MATERIAL: SEE NOTES UNLESS OTHERWISE SPECIFIED ALIGNMENT PINS: STAINLESS STEEL PER ASTM A313, FRACTIONAL: 1/64 ANGULAR: X 1 0 1) ALL DIMENSIONS ARE IN INCHES MILLIMETERS X X 15 ALLOY UNS S30200, TYPE 302 FINISH: 2400 Centrepark West Drive, Suite 100 2) ALL DIMENSIONS ARE AFTER PLATING. SEE NOTES DECIMAL: .X .030 3) BREAK CORNERS & EDGES .005 R. MAX. West Palm Beach, FL 33409 .XX .010 4) CHAM. 1ST & LAST THREADSXXX .005 5) SURFACE ROUGHNESS 63 MIL-STD-10. TITLE: e SURFACE AREA: 6) DIA.S ON COMMON CENTERS TO BE CONCENTRIC N/A FINISH: INTERPRET DIMENSIONS AND TOLERANCES WITHIN .005 T.I.R. VITA 67.3 BACKPLANE MODULE C 7) REMOVE ALL BURRS PER ASME Y14.5M - 1994 PROPRIETARY 14 PORT, SMPM DRAWN: JDT 04/05/18 THE INFORMATION CONTAINED IN THIS DRAWING THIRD ANGLE PROJECTION BODY & SIZE CAGE CODE DWG. NO. IS THE SOLE PROPERTY OF SV MICROWAVE, INC. ANY REPRODUCTION IN PART OR AS A WHOLE ALIGNMENT PINS: PASSIVATED PER AMS-2700 CHECKED: DAL 04/05/18 SF9321-60086 B 95077 WITHOUT THE WRITTEN PERMISSION OF SV MICROWAVE, INC IS PROHIBITED. APPROVED: DAL 04/05/18 SCALE: 4:1 SHEET 1 OF 2REVISION HISTORY ROHS COMPLIANT REV DESCRIPTION DATE APPROVED CUI BASIC SEE SHEET 1 PRODUCT DATA DRAWING X +.002 +0.05 2X .068 1.73 -.001 -0.03 .320.002 8.130.05 3X .100 2.54 4X .200 5.08 .080.002 2.030.05 .427 10.85 .790.002 20.070.05 GUIDE MODULE MOUNTING POSITION CLOSEST TO J0 1.040.002 26.420.05 4X R.062 1.57 RECOMMENDED PCB CUTOUT CONNECTOR LOCATION ON BACKPLANE PCB POSITION DIM X J2 2.385 60.58 J3 3.942 100.13 J4 5.276 134.00 J5 6.409 162.80 J6 7.557 191.95 DIMENSIONS ARE IN INCHES TOLERANCES: MATERIAL: SEE NOTES UNLESS OTHERWISE SPECIFIED FRACTIONAL: 1/64 ANGULAR: X 1 0 1) ALL DIMENSIONS ARE IN INCHES MILLIMETERS X X 15 FINISH: 2400 Centrepark West Drive, Suite 100 2) ALL DIMENSIONS ARE AFTER PLATING. SEE NOTES DECIMAL: .X .030 3) BREAK CORNERS & EDGES .005 R. MAX. West Palm Beach, FL 33409 .XX .010 4) CHAM. 1ST & LAST THREADSXXX .005 5) SURFACE ROUGHNESS 63 MIL-STD-10. TITLE: e SURFACE AREA: 6) DIA.S ON COMMON CENTERS TO BE CONCENTRIC N/A INTERPRET DIMENSIONS AND TOLERANCES WITHIN .004 T.I.R. VITA 67.3 BACKPLANE MODULE C 7) REMOVE ALL BURRS PER ASME Y14.5M - 1994 PROPRIETARY 14 PORT, SMPM DRAWN: JDT 04/05/18 THE INFORMATION CONTAINED IN THIS DRAWING THIRD ANGLE PROJECTION SIZE CAGE CODE DWG. NO. IS THE SOLE PROPERTY OF SV MICROWAVE, INC. ANY REPRODUCTION IN PART OR AS A WHOLE CHECKED: DAL 04/05/18 SF9321-60086 B 95077 WITHOUT THE WRITTEN PERMISSION OF SV MICROWAVE, INC IS PROHIBITED. APPROVED: DAL 04/05/18 SCALE: 4:1 SHEET 2 OF 2