USBFTV2PE2G Amphenol

USBF TV USBF TV USB Connection System for Harsh Environment DescriptionDescription USB Field allows you to use a standard USB 2.0 connection in harsh environments : Sealed against fluids and dusts (IP67) Shock, Vibration and Traction resistant No cabling operation in field and no tools required Mechanical Coding / Polarization (2 positions) Improved EMI protection ROHS compliant : N : Nickel plating With USB Field, you can insert a standard USB 2.0 cordset into a metallic plug which will protect it from shocks, dust and fluids. No hazardous in-field cabling and grounding Transform your USB cordset into a Harsh Environment Connector This metallic plug is connected into a receptacle, using a Tri Applications Applications Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device for high vibrations. Embedded Computers On the receptacle side, one A USB receptacle is soldered Data Acquisition and onto a PCB allowing for the following back terminations : Transmission in harsh another USB-A receptacle environment solder : 4 tined holes on the PCB to solder your wires For : The USB 2.0 cordset shielding is transmitted to the USB Railways receptacle through grounding fingers. Battelfield Communication For an outstanding EMI protection, the conductive plated Systems shells (Ni, Cd) with metallized receptacle inserts, transmit Navy Systems the shielding to the connector shells and finally to the panel. 1 Amphenol Amphenol Amphenol Socapex Promenade de lArve -B.P.29 - 74311 THYEZ F Tel. :+ 33 (0) 4 50 89 28 00 - Fax : + 33 (0) 4 50 96 29 75 www.usbfield.com DOC-000046-ANG-D Sept 2006Main Main CharacteristicsCharacteristics Data Transmission Environmental Protection USB Specification 2.0 Sealing (when mated) : IP67 (Temporary immersion) Data Rate : Up to 480 Mb/s for High Speed USB Salt Spray : 48 h with Nickel plating Mechanical > 500 h with Olive Drab Cadmium Fire Retardant / Low Smoke : UL94 V0 and NF F 16 101 & 16 102 Tri Start Thread coupling mechanism (MIL-DTL-38999 series III type) with anti-decoupling device Vibrations : 10 500 Hz, 10 g, 3 axes : no discontinuity > 1micro s Shocks : IK06 : weight of 250 g drop from 40 cm 15.75 in onto 2 mechanical Coding / Polarization possibilities by the user (receptacle insert rotation) connectors (mated pair) USBF TV plug retent in the receptacle : 100 N in the axis Humidity : 21 days, 43C, 98% humidity Mating cycles : 500 to 1500 Temperature Range : - 55C / +85C Can be used with most of the USB cordset Brands : No tools required Assembly Instructions Plug Assembly 1. Only if you need a full sealing (IP67) : Install the white sticker around the plug, covering the 4 little holes of the overmolding 2. Insert the black O Ring around the front face of the USB A plug. This O Ring will ensure the connection sealing. 12 3. Insert the USB cordset into the metallic backshell 4. Insert laterally to the cable the retention spacer (this spacer is soft, in order to adapt to different shapes of overmolding) and slide the overmolding of the USB-A plug into this retention spacer 3 4 5. Insert laterally to the cable the the friction ring 6. Choose the right coding (2 positions) and insert the USB-A plug into the protective plug. Reference is main key. 6 5 7. Screw the backshell on the plug body. A spanner can be necessary to fully screw it, and the connection to the receptacle can help. Important Note : The connection sealing is not done by the black retention spacer (which is sloted), but by the front face ORing (see 2.) 7 7 Receptacle Assembly Insert the USB module from the rear. Reference is main key. Beware to have a coding compatible with the coding you used for the plug : on front view, the white shapes in the USBs must be on the same side. To remove the USB module, insert the removal tool USBF ODE from the Front, and push back the module. 2 Amphenol Amphenol Socapex Promenade de lArve -B.P.29 - 74311 THYEZ F Tel. :+ 33 (0) 4 50 89 28 00 - Fax : + 33 (0) 4 50 96 29 75 www.usbfield.com