ACD-15 Pro & ACD-15 TRMS Pro 2000A Digital Clamp-on Multimeters CAT TRUE RMS z 600V ACD-15 TRMSPro Wide range of measuring features built into one, professional meter. The TRMS version with backlight display, improves performance and reliability. TRMS & Backlight Screen (ACD-15 TRMS Pro only) Low battery indication Measurements: AC/DC Voltage up to Data hold 600V, AC Current up to 2000A, Large, easy to read LCD display Resistance, Frequency and Capacitance Accommodates conductors up Non-contact Voltage Level Detection to 1.77 (45mm) in diameter Diode Test Carrying case, test leads, Audible continuity batteries (installed) and Auto-check feature automatically manual included selects DCV, ACV or Resistance (W) Voltage overload protection for Auto and manual ranging all functions up to 600V AC/DC Auto power off Safety CAT III 600V Automatic polarity FEATURES ACD-15 ACD-15 TRMS ACCURACY N/A Yes TRMS Measuremaent 400.0 / 2000 A +/-(1.5% Rdg + 5 LSD) 50 and 60Hz AC Current 6.000 / 60.00 / 600V +/-(2.0% Rdg + 5 LSD) DC & 50 / 60 Hz** AC/DC Voltage 6.000 /60.00 / 600.0 kOhms 6.000 MOhms +/-(1.0% Rdg + 4 LSD) 60.00 to 600.0 kOhms ranges** Resistance 10Hz to 1kHz 0.5%+4d Frequency 100.0, 1000 nF 3.5%+5d Capacitance 10.00, 100.0, 2000 F 15V to 85V - Non-contact Voltage 40V to 130V - - 60V to 210V - - - 90V to 300V - - - - Above 120V - - - - - **For other ranges see website ( ACD-15 Pro & ACD-15 TRMS Pro 2000A Digital Clamp-on Multimeters GENERAL SPECIFICATIONS DC Voltage Diode Tester Display: 3-5/6 digits 6000 counts LCD display Open Circuit Voltage Test Current RANGE Accuracy Update Rate: 5 per second nominal Polarity: Automatic 6.000V 0.5% + 3d < 1.6 VDC 0.4mA (typical) Low Battery: Below approx. 2.4V 60.00V 1.0% + 5d Audible Threshold: between 0.015V & 0.080V Operating Temperature: 0C to 40C Relative Humidity: Maximum relative humidity 80% 600.0V 2.0% + 5d for temperature up to 31C decreasing linearly to 50% NMRR : >30dB 50/60Hz Capacitance relative humidity at 40C CMRR : >100dB DC, 50/60Hz, Rs=1k Altitude: Operating below 2000m 1) Range Accuracy Hi-Z DCV Input Impedance: 5M, 90pF nominal Storage Temperature: -20OC to 60OC, AutoCheck Lo-Z DCV input impedance: 3) < 80% R.H. (with battery removed) 100.0nF 2), 1000nF, 3.5%+5d Initially 1.6k, 90pF nominal Impedance increases signifi- Temperature Coefficient: nominal 0.15 x (specified 10.00F, 100.0F, 2000F cantly as display voltage increases from 50V (typical). Typical accuracy)/OC (0OC -18OC or 28OC -40OC), or other- 1) Accuracies with film capacitor or better impedances vs display voltages for reference are: wise specified 2) Accuracy below 50nF is not specified Sensing: Average sensing for ACD-15 PRO True 15k 100V 100k 300V 210k 600V 3) Specified with battery voltage above 2.8V (approx- RMS sensing for ACD-15 TRMS PRO AutoCheck DCV Threshold: mately half full battery). Accuracy decreases Safety: Meets IEC61010-2-032(1994), EN61010-2- > +1.5VDC or < -1.0VDC nominal gradually to 12% at low battery warning voltage of 032(1995), UL3111-2-032(1999).Category III 600 Volts AC & DC approximately 2.4V Transient Protection: 6.5kV (1.2/50s surge) for all models 600 with Continuity Beeper Pollution Degree: 2 Non-Contact EF-Detection RANGE Accuracy E.M.C.: Meets EN61326(1997, 1998/A1), EN61000-4- 2(1995), and EN61000-4-3(1996) 1) 600.0 2.0%+8d Typical Voltage Bar Graph Indication In an RF field of 3V/m: Capacitance function is not spec- 15V TO 85V - ified. Total Accuracy = Specified Accuracy + 45 digits Continuity Beeper Response: < 100s Performance above 3V/m is not specified 40V TO 130V - - Open Circuit Voltage: 0.4VDC typical Overload Protections: ACA Clamp-on jaws: AC 2000A 1) Audible Threshold: between 10 and 300 Add 40d to 60V TO 210V - - - rms continuous + & COM terminals (all functions): specified accuracy while reading is below 20% of range 600VDC/VAC RMS 90V TO 300V - - - - Power Supply: standard 1.5V AAA Size (NEDA 24A or ABOVE 120V - - - - - IEC LR03) battery X 2 Frequency Power Consumption: 2.2mA typical for ACD-15 PRO Indication: Bar graph segments & audible 2.8mA typical for ACD-15 TRMS PRO Voltage Sensitivity Range beep tones proportional to the field strength APO Timing: Idle for 3 minutes Detection Frequency: 50/60Hz Range (Sine RMS) APO Consumption: 40A typical on all model func- Detection Antenna: Top side of the stationary jaw tions except that 230A typical on ACD-15 TRMS PRO 6.000V 4V 10Hz ~ 30kHz Probe-Contact EF-Detection: For more precise voltage & current functions 60.00V 30V 10Hz ~ 1kHz indication of live wires, use the Red (+) probe for Dimension: L224mm X W78mm X H40mm direct contact measurements Weight: 220 gm approx 600.0V 60V 10Hz ~ 1kHz Jaw opening & Conductor Diameter: 45mm max Accuracy: 0.5%+4d Max display: 9999 counts Accessories: Test leads (pair), batteries installed, ACA Current (Clamp-on) user s manual, & soft carrying pouch Electrical Specifications: Accuracy is (% reading digits + 1) 2) 3) RANGE Accuracy AC Voltage number of digits) or otherwise specified, at 23 OC 5 OC & less than 75% R.H. True RMS Model ACD-15 TRMS PRO RANGE Accuracy 50Hz / 60Hz ACV & ACA clamp-on accuracies are specified from 5% to 50Hz / 60Hz 100% of range or otherwise specified. Maximum Crest 400.0A, 2000A 1.5% + 5d Factor are as specified below, and with frequency spec- 6.000V, 60.00V 1.5% + 5d True RMS model ACD-15 TRMS PRO Crest Factor: trums, besides fundamentals, fall within the meter specified < 2.0 : 1 at full scale & < 4.0 : 1 at half scale 600.0V 2.0% + 5d AC bandwidth for non-sinusoidal waveforms. 1) Add 8d to specified accuracy while reading is Ohms 50Hz ~ 500Hz 2) below 10% of range Induced error from adjacent 6.000V, 60.00V 2.0% + 5d current-carrying conductor: < 0.06A/A 1) RANGE Accuracy 3) Specified accuracy is for measurements made at 600.0V 2.5% + 5d 2) 3) the jaw center. When the conductor is not positioned 6.000k 1.2% + 6d CMRR: >60dB DC to 60Hz, Rs=1k at the jaw center, position errors introduced are: Add Hi-Z ACV Input Impedance: 5M, 90pF nominal 60.00k, 600.0k 1.0% + 4d 1% to specified accuracy for measurements made AutoCheck Lo-Z ACV input impedance: Initially 1.6k, within jaw marking lines (away from jaw opening) 6.000M 2.0% + 4d 90pF nominal Impedance increases significantly as display Add 4% to specified accuracy for measurements Open Circuit Voltage: 0.4VDC typical voltage increases from 50V (typical). Typical impedances vs made beyond jaw marking lines (toward jaws opening) 1) display voltages for reference are: Cool down interval 2 minutes after over 50V measurements in Auto-V position 15k 100V 100k 300V 210k 600V 2) Beeper on while reading < 0.025k AutoCheck ACV Threshold: > 2VAC (50/60Hz) nominal. 3) Add 40d to specified accuracy while reading is True RMS model ACD-15 TRMS PRO Crest < 1.6 : 1 at full scale & < 3.3 : 1 at half scale Miramar, FL 33025 Toll Free: 800-327-5060 Phone: 954-499-5400 Fax: 866-287-7222 www.Amprobe.com www.AMPROBE.com