Data Sheet ACDC-400 Digital AC/DC Clamp-on Multimeter The Amprobe ACDC-400 clamp meter is full featured with wide measurement capabilities. It measures both AC and DC Current to 400 amps, AC and DC Voltage to 600V, plus Re- sistance and Continuity. The ACDC-400 also offers software features of Min/Max and Relative measurements with a large digital and analog combined display and backlight. AC/DC Current up to 400A AC/DC Voltage up to 600V Resistance measurement Continuity test Data Hold MAX/MIN recording Relative measurement No hassle warranty Backlight No waiting. Analog bargraph Auto or Manual range selection No shipping charges. Max Conductor 29.97 mm (1.18) Our commitment to Includes carrying case high-quality products and customer service CAT III 600V is demonstrated by our industry exclusive No Hassle warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot. (note: 500 MSLP limit) Amprobe Test Tools www.Amprobe.comData Sheet ACDC-400 Digital AC/DC Clamp-on Multimeter Specifications General Specifications Display 3-3/4 digits 4000 counts LCD display Update Rate 2 per second nominal Polarity Automatic Power Supply 2 standard 1.5V AAA Size (NEDA 24G or IEC R03) battery Battery Life typical 25 hours APO Timing idle for 30 minutes Low battery on LCD approx. 2.4V Environment Indoor operation, below 2000 m Temperature / Humidity Operating: 5C to 40C (41F to 104F), < 80% RH Storage: -10C to 60C (14F to 122F), < 80% RH Jaw opening 27mm (1.1 in) max Dimension 202 x 70 x 40mm (7.9 x 2.7 x 1.6 in.) Weight 254 gm (0.6 lb) Safety LVD Meets EN60101-1:2001 EN61010-2-032(2002), Category II- 600 Volts ac & dc pollution degree : 2 class 2 EMC EN61326-1:2006 Electrical Specifications (23 C 5 C) < 75%RH DC Voltage Range Accuracy 400.0 mV 4.000V, 40.00V, 400.0V (0.8% rdg + 2 dgts) 600V (1.0% rdg + 2 dgts) Input impedance 10M , 30pf nominal ( 100 M for 400.0mV range) Max input 600 VDC AC Voltage (sinusoidal) Range Frequency Accuracy 400.0mV 40Hz to 60Hz (1.0% rdg + 50 dgts) 4.000V, 40.00V, 400.0V 50Hz to 500Hz (1.0% rdg + 3 dgts) 600V 50Hz to 500Hz (1.2% rdg + 3 dgts) Input impedance 10M , 30pf nominal ( 100 M for 400.0mV range) Max input 600 VAC rms DC Current (Clamp-On) Range Accuracy 0.00A to 40.00A (2.0% rdg + 10 dgts) 40.0A to 400.0A (2.0% rdg + 10 dgts) Max current 400A rms continuous 600 A rms ( 60 seconds) ACA Current (Clamp-On) (sinusoidal) Range Frequency Accuracy 0.00A to 40.00A 50Hz to 60Hz (2.0% rdg + 10 dgts) 40.0A to 400.0A 50Hz to 60Hz (2.0% rdg + 10 dgts) Max current 400A rms continuous 600 A rms ( 60 seconds) Resistance Range Accuracy 400.0 (1.0% rdg + 5 dgts) 4.000k , 40.00k , 400.0k , 4.000M (1.0% rdg + 3 dgts) 40.00M (3.0% rdg + 3 dgts) Open Circuit Voltage 0.45 Vdc typical 1.5 Vdc typical for 400.0 Continuity Tester Open Circuit Voltage: 1.4Vdc typical Audible threshold: < 40 Amprobe Test Tools Amprobe Test Tools Europe website: www.Amprobe.com Amprobe Test Tools Europe email: info amprobe.com Beha-Amprobe GmbH Everett, WA 98203 In den Engematten 14 Tel: 877-AMPROBE 79286 Glottertal, Germany 2008 Amprobe Test Tools. All rights reserved. 10/2008 3320124 Rev A Tel.: +49 (0) 7684 8009 - 0 Amprobe Test Tools www.Amprobe.com