www.Amprobe.com LT-10 Lamp Tester The compact tool The Amprobe LT-10 Lamp Tester is a pocket-size tool that takes the guesswork out of troubleshooting fluorescent lighting systems. Quickly determine by process of elimination, whether its the bulb, pins, voltage or ballast. The highly responsive 4-foot antenna, will save you trips up and down the ladder. The LT-10 Lamp Tester will go from your pocket to answers in seconds. Tests fluorescent (electroluminescent) Ultra-compact design for portability lights 4 Foot removable and retractable Built-in VolTect non-contact voltage antenna to test bulbs and voltage detection without use of a ladder removable, fully retractable antenna included Lamp and filament test to check to test lights and voltage without a fluorescent light bulbs ladder Simple one-handed, single button Insulated antenna sleeve and tip operation provided to safely extend and retract during use Compatible with fluorescent (electroluminescent) light bulbs: Includes: 4 foot antenna, users manual, - T2, T4, T5, T8, T9, T10, T12, T17, PG17 battery (installed) and carrying case - Fluorescent energy saving light bulbs Troubleshooting Lighting Systems is Easy as 1-2-3: 1. Check if fluorescent light bulb is damaged with Lamp and Pin test functions 2. Verify if voltage is present at the ballast with non-contact voltage detection 3. If light bulb passes the test in step 1 and the voltage is present in step 2, but the lamp is not working, then replace ballast. LT-10 Specifica TionS Specications LT-10 Compatible lamps T2, T4, T5, T8, T9, T10, T12, T17, PG17 and Fluorescent energy saving light bulbs Test voltage Approximately 3 kV / 280 kHz Field strength Approximately 100 V/m at 260 - 300 kHz Maximum antenna length 4 feet Drop proof 3 feet Operating temperature -10C to +50C (14F to 122F) 85% RH Storage temperature -10C to +50C (14F to 122F) 85% RH Operating altitude Up to 2000 meters Supplied with 4 feet antenna, users manual, battery (installed) and carrying case For more detailed specifications see users manual. For detailed specifications and ordering info go to www.Amprobe.com 4265812 A 2013 Amprobe. All rights reserved.www.Amprobe.com LT-10 DeTaiLeD Specifica TionS Specications Range Compatible lamps T2, T4, T5, T8, T9, T10, T12, T17, PG17 and Fluorescent energy saving light bulbs Test voltage Approximately 3 kV / 280 kHz Field strength Approximately 100 V/m at 260 - 300 kHz Maximum antenna length 4 feet Filament test T2, T4, T5, T8, T9, T10, T12 VolTect(tm) non-contact AC 90 V to AC 600 V, 50/60 Hz voltage detection CAT II 300 V Non-contact voltage LED illuminates and beeps at approx. 3 mm (0.12 in) distance from a wire carrying 120 Vac sensitivity with probe tip LED illuminates and beeps at approx. 5 mm (0.2 in) distance from a wire carrying 230 Vac (typical) Drop proof 3 feet Operating temperature -10C to +50C (14F to 122F) 85% RH Storage temperature -10C to +50C (14F to 122F) 85% RH Operating altitude Up to 2000 meters Battery One 9V battery, 6LR61 / 6LF22 / MN1604 or equivalent. Battery life Up to 500 tests (Alkaline typically) Dimensions (L x W x H) Approximately 170 x 40 x 24 mm (6.69 x 1.57 x 0.94 in) without antenna Weight Approximately 80 g (0.18 lb) with battery installed, excluding 4 foot antenna Safety compliance IEC 61010-1, UL 61010-1, CAN/CSA-C22.2 No. 61010-1-2004 EMC compliance IEC 61326-1 Certification CSA and CE Calibration NA Warranty 1 Year For complete specifications please download the product datasheet and the users manual on www.Amprobe.com. Amprobe Amprobe Europe info amprobe.com In den Engematten 14, Everett, WA 98203 79286 Glottertal, Germany Tel: 877-AMPROBE (267-7623) Tel.: +49 (0) 7684 8009 - 0 For detailed specifications and ordering info go to www.Amprobe.com 4265812 A 2013 Amprobe. All rights reserved.