Data Sheet ACD-14 TRMS-PLUS 600A Clamp-On Multimeter with Dual Display The ACD-14 TRMS-PLUS is the professionals choice for both HVAC & Electrical applications due to its complete set of measuring features. Its dual displays allows viewing amperage and voltage simultaneously. True RMS voltage and current measurements for more precise results when measuring in noisy AC environments. n Dual Displays Permits simultaneous reading of Amperage & Voltage n Micro Amps measurement for testing Flame Sensors n True RMS for precise measurement results n Capacitance to 3000 F n New thin jaws, 5mm thinner than others to access tight measurement spaces n Temperature with Type-K Thermocouple No hassle n AC and DC Voltage to 600V warranty n AC Current to 600A No waiting. n Resistance to 40MW n Continuity Buzzer No shipping charges. n Frequency measurement n Diode test Our commitment to high-quality products n Hold and Maximum reading functions and customer service n In rush current is demonstrated by n Accommodates conductors up to 28 mm ( 1.1) in diameter our industry exclusive n Auto ranging No Hassle warranty. In the unlikely event that an Amprobe Test Tool requires warranty service, any of our local dealers are authorized to replace it, on the spot. (note: 500 MSLP limit) 600V Amprobe Test Tools www.Amprobe.comData Sheet ACD-14 TRMS-PLUS 600A Clamp-On Multimeter with Dual Display General Specifications Display: 3-3/4 digits 4000 counts, dual LCD displays Update Rate: 3 per second nominal Polarity: Automatic Low Battery Indication: Below approx. 2.4V Operating Temperature: 0C to 40C (32F to 104F) Relative Humidity: Maximum relative humidity 80% for temperatures up to 31C (88F) decreasing linearly to 50% relative humidity at 40C (104F) Altitude: Indoor operation below 2000m (6,562 ft) Storage Temperature: -20C to 60C (-4F to 140F), < 80% R.H. (with battery removed) Temperature Coefficient: Nominal 0.15 x (specified accuracy)/F 0C - 18C or 28C - 40C (32F -64F or 82F - 104F), or otherwise specified Sensing: Average sensing for ACD-14 FX Power Supply: Two 3V alkaline button batteries (ANSI/NEDA-5004LC, IEC-CR2032). Battery Life: 95 hours approx. (in DCV mode) Power Consumption: 2.5 mA typical for ACD-14 FX Low Battery Indication: Below approx. 2.4V (battery symbol appears in upper right) Auto Power Off: After being idle for 30 minutes APO Consumption: ACD-14 TRMS-PLUS: 0.8A typical except 25A typical for temperature function Safety: CE EN61010-1, EN61010-2-032 - Pollution Degree 2 Transient Protection: 6.5kV (1.2/50s surge) for all models E.M.C.: Meets EN61326 Overload Protections: ACA Clamp-on jaws: AC 600A RMS continuous + & COM terminals (all functions): 600VDC/VAC RMS Dimension: L190mm X W 63mm X H 32mm (L 7.48 X W 2.48 X H 1.25) Weight: 204 g (0.450 lb approx.) Jaw opening & Conductor diameter: 28 mm ( 1.1) max Electrical Specification Accuracy (23 C 5 C & < 75% R.H.) Function Range Accuracy DC Voltage 400.0 mV (0.3% rdg + 4 digits) 4.000V, 40.00V, 400.0V (0.5% rdg + 3 digits) 600V (1.0% rdg + 4 digits) NMRR: >50dB 50/60Hz CMRR: >120dB DC, 50/60Hz, Rs=1k W Input Impedance: 10M W, 30pF nominal (1000M W for 400.0mV range) AC Voltage 50Hz -- 500Hz 4.000V, 40.00V, 400.0V (1.5% rdg + 5 digits) 600V (2.0% rdg + 5 digits) CMRR: >60dB DC to 60Hz, Rs=1k W Input Impedance: 10M W, 30pF nominal TRMS sensing from 10% to 100% of range. AC Current (Clamp-on) 50Hz / 60Hz 40.00A (1.5% rdg + 8 digits) 400.0A (1.5% rdg + 8 digits) 600A (1.5% rdg + 8 digits)* *Accuracy specified to 600A continuous. TRMS sensing from 10% to 100% of range. Amprobe Test Tools www.Amprobe.com