Data Sheet ACD-31P 1000A Clamp-on Power Meter This instrument combines the standard features of professional clamp-on meters, with full Power analyzing capabilities. Measure: Active (W), Reactive (VAR) and Apparent (VA) Powers along with dual display Power Factor readout. Increase your ability to analyze the data with an optional PC interface kit. TRMS sensing Back light display Autotect Auto Selection of AC Volts, DC Volts or AC Amps Measurements AC/DC Voltage up to 600V, AC Current up to 1000A, Resistance, Frequency Active (W), Reactive (VAR) & Apparent (VA) Power with dual-display Power Factor readout Temperature No hassle Optional PC interface capability warranty Audible continuity No waiting. Auto power off No shipping Automatic polarity charges. Low battery indication Our commitment to high-quality products Peak hold and customer service is demonstrated by Data hold our industry exclusive Large, easy to read LCD display No Hassle warranty. In the unlikely event Accommodates conductors up to 1.77 (45mm) in that an Amprobe Test diameter Tool requires warranty Voltage overload protection for all functions up to 600V service, any of our local dealers are AC/DC authorized to replace Safety CAT III 600V it, on the spot. (note: 500 MSLP limit) 600V Amprobe Test Tools www.Amprobe.comACD-31P 1000A Clamp-on Power Meter Data Sheet Specifications (valid for 23 C 5 C, for less than 70 % relative humidity). Display Voltage functions 6000 counts LCD display(s) Power, Ohm & Hz functions 9999 counts LCD display(s) ACA clamp-on function 4000 counts LCD display(s) Update Rate Power function 1 per second nominal Voltage, ACA clamp-on, Ohm, Hz & Temperature functions 4 per second nominal Polarity Automatic Operating Temperature 0C to 40C < 80% RH < 31C decreasing linearly to 50% RH 40C Altitude Indoor operation, below 2000m. Storage Temperature -20C to 60C, < 80% R.H. (with battery removed) Temperature Coefficient nominal 0.15 x (specified accuracy)/ C (0C -18C or 28C -40C) Sensing True RMS sensing Power Supply standard 1.5V AAA Size (NEDA 24A or IEC LR03) battery X 2 Low Battery Below approx. 2.4V Power Consumption Voltage, ACA, Hz & Power functions 10mA typical Ohm & Temperature functions 4mA typical APO Timing Idle for 17 minutes APO Consumption 10A typical Jaw opening & Conductor diameter 45mm max Dimension 224 x 78mm x 40mm (8.9 x 3.1 x 1.6 in.) Weight 224 gm approx Safety LVD Meets EN60101-1:2001 EN61010-2-032(2002), Category III- 600 Volts ac & dc pollution degree : 2 EMC EN 61326-1 Electrical Specifications AC Voltage Voltage Range Accuracy 600.0V 50Hz to 60Hz (0.5% rdg + 5d) 45 to 50Hz, 60 to 500Hz (1.5% rdg + 5d) 500Hz to 3.1kHz (2.5% rdg + 5d) CMRR > 60 dB DC to 60 Hz, Rs = 1 k Input Impedance 2 M, 30 pF nominal Crest Factor < 2.3 : 1 at full scale < 4.6 : 1 at half scale TM ACV AutoTech Threshold 30VAC (40 to 500 Hz) nominal DC Voltage Range 600.0 V Accuracy (0.5% rdg + 5d) NMRR > 50 dB 50/60 Hz CMRR >120 dB DC, 50/60 Hz, Rs = 1 k Input Impedance 2 M, 30 pF nominal TM DCV AutoTech Threshold 2.4VDC nominal PEAK-rms HOLD (ACA & ACV only) Response 65ms to 90% rdg Amprobe Test Tools