AMP-25 AC/DC TRMS Mini-Clamp Convenience Without Compromise Small size doesnt mean small features. The Amprobe AMP-25 Mini-Clamp is pocket-sized, enabling quick and easy spot checks of electrical systems. With its rugged construction and CAT III 600V rating, the AMP-25 is a must-have professional troubleshooting tool for commercial electricians and electrical contractors. The AMP-25 is designed to measure AC/DC load current and inrush current for motors. Essential features like True-RMS, non-contact voltage and low pass filter make this clamp stand tall next to clamps twice its size. With the AMP-25, you never have to sacrifice performance for size. AMP-25 Features True-RMS for noisy environments provides accuracy and dependability Pocket-sized AC & DC current to 300 A 5.8 height. (10mA resolution) Low pass filter for variable frequency drives Inrush current for motor start-up monitoring Non-contact voltage detection (NCV) Jaw opening to 1 in (25 mm) Autoranging DCA zero and data hold Auto power off Large LCD backlit display Safety Rated CAT III 600 V AMP-25 AC/DC TRMS Mini-Clamp Amprobe info amprobe.com Fluke Corporation, Everett, WA 98203 Tel: 877-AMPROBE (267-7623) 2014 Amprobe For detailed specifications and ordering go to www.Amprobe.com 6004358 AAMP-25 Applications Troubleshoot electrical Utilize the inrush current The non-contact voltage (NCV) Pocket-sized for quick and easy systems and measure AC/DC function for motor start-up function checks for voltage spot checks of electrical systems. load current on exposed wires monitoring. presence. in a breaker panel. AMP-25 Detailed Specifications Feature AMP-25 Best Accuracy General Specifications AMP-25 Display Digital: 6000 counts, updates 2/sec +/-(1.5% + 5 LSD) Range Autoranging 50 to 100 Hz 3 A (1) 60.00 / 300.0 A AC Current +/-(2.5% + 5 LSD) Overrange Indication OL or -OL 100 to 400 Hz 3 A 32 F to 86 F (0 C to 30 C), 80% RH Operating Temperature 86 F to 104F (30C to 40 C), 75% RH +/-(1.5% + 5 LSD) 104 F to 122F (40C to 50 C), 45% RH (2) DC Current 60.00 / 300.0 A 300 A range Operating Altitude 2000 m Storage Temperature -4 F to 140 F (-20C to +60C) +/-(3.5% + 5 LSD) 300.0 A Low Pass Filter Pollution Degree 2 50 to 60 Hz 3 A 0.2 x (specified accuracy)/ Temperature Coefficient F(<64.4F, >82.4F)/ C (<18 C, >28 C) True-RMS MIL-PRF-28800F for A Class 2 Vibration Requirement Inrush Current Drop Proof 4 feet (120 cm) Battery Two 1.5 V LR44 size button batteries Non-Contact Voltage Battery Life 20 hours typical Low Battery Indication Data Hold Auto Power Off Idle for 20 minutes (1) Note : Crest Factor (C.F.) may be up to 3.0 as 4000 counts. Overvoltage Category CAT III 600 V For non-sinusoidal waveforms: IEC/EN 61010-1, IEC/EN 61010-2-030, Safety Compliance Add 3.0% for C.F. 1.0 to 2.0 IEC/EN 61010-2-032 Add 5.0% for C.F. 2.0 to 2.5 EMC Compliance IEC/EN 61326-1 Add 7.0% for C.F. 2.5 to 3.0 Position error of clamp: +/- 1.5 % of LCD reading Agency Approval (2) Add 10 LSD in auto AC/DC sense mode Dimensions (H x W x L) 5.8 x 2.4x 1.3 in (147 x 60 x 32 mm) Approximately 0.31 lb (140 g) Weight with batteries installed Jaw Opening & Conductor 1.0 in (25 mm) max. Diameter Accessories Included: Carrying case, two 1.5 V LR44 batteries installed and user manual. Amprobe info amprobe.com Fluke Corporation, Everett, WA 98203 Tel: 877-AMPROBE (267-7623) For complete information about Amprobe test tools, visit www.Amprobe.com 2014 Amprobe Specifications subject to change without notice. Printed In U.S.A. 6004358 A