AMP-300 Series Motor Maintenance TRMS Clamp Meters The Modern Evolution of the Professional Clamp Meter Amprobes AMP-300 Series True-RMS Clamp Meters offer a complete range of measuring functions for modern industrial environments, motor testing and HVAC applications. All models feature True-RMS sensing, low pass filters and fast response processors for quick, error-free measurements. The Amp-Tip function allows for precise measurement of current down to the tenth of an Amp, and a third input jack enables motor rotation and 3-phase sequence testing. AMP-300 Series Features True-RMS Motor Testing Capabilities - Motor rotation - 3-phase sequence testing - Inrush current monitoring during motor start-up HVAC Features - Temperature measurement User selectable F or C - DC Microamps for flame sensor testing - Capacitance measurement for start and run motor capacitors Amp-Tip Function Low Pass Filter for variable frequency drives Safety Rated: CAT III 600 V (AMP-310, AMP-320) CAT IV 600 V, CAT III 1000 V (AMP-330) AMP-310 AMP-320 AMP-330 AC Clamp Meter AC/DC Clamp Meter AC/DC 1000 A Clamp Meter HVAC Electrical Motor Industrial Motor Maintenance Maintenance Amprobe info amprobe.com Fluke Corporation, Everett, WA 98203 Tel: 877-AMPROBE (267-7623) 2014 Amprobe For detailed specifications and ordering go to www.Amprobe.com 6003578 BAMP-300 Series Product Details True-RMS Non-contact voltage Measurements: for accurate voltage detection (NCV) Model AMP-310 AMP-320 AMP-330 measurements in noisy CAT IV 600 V Safety Rating CAT III 600 V CAT III 600 V Audible continuity and environments. CAT III 1000 V Up to 600 V AC/DC Up to 600 V AC/DC Up to 1000 V AC/DC diode test Voltage AC Current Up to 600 A Up to 600 A Up to 1000 A Low pass filter DC Current Up to 600 A Up to 1000 A Data hold, relative zero, for current and voltage Frequency 5 to 999 Hz measurements on variable MAX/MIN/AVG mode Resistance 0 to 60 k frequency drives. Capacitance 0.0 to 2500 F Large LCD backlit Temperature Amp-Tip function display for precise low-current measurement of small Safety rated diameter wires down to 0.1 CAT III 600 V (AMP-310, AMP-320) Amp to help with electrical system troubleshooting. CAT IV 600 V CAT III 1000 V (AMP-330) AMP-300 Series Applications Accurate measurement of current, 3-phase Motor and Phase Rotation DC Microamps output for measurement voltage and frequency on all Tests allow proper connection of a of flame sensors. Test the proper electrical systems including distorted, motor to a 3-phase system. Improperly operation of the flame sensor safety non-sinusoidal signals (True-RMS connected motors will spin in a reverse system in gas appliances. A broken function) and variable frequency drives direction, which may destroy the motor sensor in a gas appliance will prevent (low pass filter). or equipment connected to it. the safety valve from opening and the appliance will not work. Capacitance measurement for start Low Pass filter allows measurement of and run motor capacitors. current and voltage on variable frequency Inrush current measurement for motor drives (motors with speed controlled by start-up monitoring, allowing users to Resistance and continuity functions to frequency). Without this feature, the verify that the motor is receiving the verify quality of electrical connections and meter would provide erroneous readings required inrush current to support proper to check if motor and transformer coils when measuring voltage and current. motor start. are working properly. AMP-310 AC Clamp Meter HVAC AMP-320 AC/DC Clamp Meter AMP-330 AC/DC 1000 A Clamp Meter Electrical Motor Maintenance Industrial Motor Maintenance Amprobe info amprobe.com Fluke Corporation, Everett, WA 98203 Tel: 877-AMPROBE (267-7623) 2014 Amprobe For detailed specifications and ordering go to www.Amprobe.com 6003578 B