Data Sheet LCR55A Handheld Component Tester The ultimate component checker measures inductance, capacitance, resistance, transistors, diodes and microwave diodes Plug-in test slots and test leads with threaded alligator clips Oversized, digital display Data Hold and Max Hold Zero Adjust Pot for Ohms Low Battery Indication Auto-Power Off General Specifications No hassle Display 3-12 digit LCD, max reading of 1999 warranty Display Update Rate 2.5 /sec, nominal Power Standard 9 V transistor battery No waiting. Battery Life Alkaline 200 hours No shipping Operating Temperature 0 C to + 50 C (32 F to 122 F), < 70 % R.H. charges. Storage Temperature -20 C to +60 C (-4 F to 140 F), < 80 % R.H. battery removed Dimensions (WxLxH) 183 x 79 x 38 mm (7.2 in x 3.1 in x 1.5 in) Our commitment to Weight (incl. batteries) 311 g (11 oz.) high-quality products Warranty One year and customer service is demonstrated by our industry exclusive No Hassle warranty. In the unlikely event Included Accessories that an Amprobe Test TL36A Test Leads, spare fuse, battery, Tool requires warranty (1) pair alligator clips, and users manual. service, any of our local dealers are Optional Accessories authorized to replace VC221B Vinyl Case it, on the spot. DL243D Basic Test Lead Kit DL248D Deluxe Test Lead Kit (note: 500 MSLP limit) TL245A Test Lead Set Amprobe Test Tools www.Amprobe.comLCR55A Handheld Component Tester Data Sheet Specifications (23 C 5 C, < 75 % R.H. non-condensing) Function Range Accuracy Resistance 20 W 1.2 % rdg (zero adjust) 200 W (0.5 % rdg + 3 dgts) 2 k W to 2 M W (0.5 % rdg + 1 dgt) 20 M W (2.0 % rdg + 2 dgts) Resolution 10 m W in 20 W range Open Circuit Voltage 20 W range: 6.5 V dc 200 W range: 3.0 V dc All other ranges: 1.2 V dc Continuity Audible Indication 2 k W range: Tone at R < 30 W Response Time 800 ms approx. Diode Test Test Current 1 mA (approximately) Test Voltage 3.0 V DC (1.5 % rdg + 1 dgt) Display Forward junction voltage Microwave Diode Test Test Current 0.6 mA approximately Test Voltage 7.0 V DC typical (3.0 % rdg + 1 dgt) Display Forward junction voltage Capacitance 200 pF to 200 nF (1.0 % rdg + 1 dgt) 2 F to 200 F (2.0 % rdg + 1 dgt) 200 F < 1000 F (3.0 % rdg + 3 dgts) 1000 F > 2000 F (5.0 % rdg + 5 dgts) Note: In lower ranges, subtract 6 points residual offset reading from result Test Frequency 200 pF to 2 F: 1000 Hz 20 F to 200 F: 100 Hz 2000 F: 10 Hz Temperature Coefficient < 0.5 F: 0.1%/C > 0.5 F: 0.2%/C Inductance 200 H (5.0 % rdg + 30 dgts)* 2 to 200 mH (3.0 % rdg + 20 dgts)* 2 mH to 200 H (5.0 % rdg + 20 dgts)* Test Frequency 200 H to 2 H ranges: 1000 Hz 20 H to 200 H ranges: 100 Hz Temperature Coefficient < 0.5 H: 0.2%/C > 0.5 H: 0.5%/C Transistor Test hFE Range 0 to 1000 hFE Base Current 3 A approximately hFE Voltage C - E 3.0 V DC approximately Iceo Range, Leakage Current 10 nA to 20 A Overload Protection Resistance 350 V DC or AC RMS Capacitance 0.1 A/250 V fast acting fuse Continuity 350 V DC or AC RMS Diode Test 350 V DC or AC RMS Micro Wave Diode Test 350 V DC or AC RMS Inductance 0.1 A/250 V fast blow fuse *For values of Q 7 Amprobe Test Tools Amprobe Test Tools Europe website: www.Amprobe.com In den Engematten 14 email: info amprobe.com 79286 Glottertal, Germany Everett, WA 98203 Tel.: +49 (0) 7684 8009 - 0 2007 Amprobe Test Tools. All rights reserved. Tel: 877-AMPROBE 7/2007 PN: 1646419 D-EN-N Rev C Amprobe Test Tools www.Amprobe.com