www.Amprobe.com TIC 300 PRO Non-Contact High Voltage Detector MSHA certified and intrinsically safe, trusted by utility crews for over 20 years The Amprobe TIC 300 PRO high voltage detector is a The TIC 300 PRO has a low-voltage setting (30 to 1,500VAC) non-contact voltage detector for detecting alternating current for checking voltage presence in breaker panels, breakers, (AC) on transmission lines, power distribution equipment, power outlets and wiring. It also has a high-voltage setting downed power lines, fuses, electrical outlets, and other power (1,500 to 122,000 V AC when used with the TIC 410A Hot Stick lines. It detects voltages in low, medium and high voltage attachment) for checking transmission lines, downed power applications (30-122kVAC) with bright visual and loud alerts. It is lines and substations. The presence of AC voltage is indicated rugged and reliable for utility, industrial, heavy manufacturing by an LED light and audible beeper. It is MSHA certified and and mine safety applications. The TIC tracers get thrown around intrinsically safe. The TIC 300 PRO has a self-test that verifies the in utility trucks, but the units are built to withstand the rough tester works properly and is drop-proof up to 6 feet. treatment. TIC 300 PRO Features MSHA certified and intrinsically safe Utility tool for checking transmission lines, power distribution equipment, down power lines, fuses, and load break connectors Visual and audible voltage indication High-voltage setting 1500 V ac to 122,000 V AC (with TIC 410A Hot Stick) for utility applications such as transmissions lines, power distribution Self-test equipment, down power lines, transformers and more. Low-voltage setting for checking voltage presence in breaker panels, breakers, power outlets and wiring High range A unique self-test feature so there is 1,500 V to 122k V ac no need to connect directly to a current carrying conductor saving your time Low range and keeping you safe. LED lights 30 V to 1,500 V ac Ergonomic design with a convenient handle Drop proof up to 6 feet TIC 300 PRO High Voltage Tester United States Department of Labor United States Department of Labor Shotgun adapter MSHA Mine Safety and Health Administration for hot stick attachment MSHA Mine Safety and Health Administration Amprobe info amprobe.com Fluke Corporation, Everett, WA 98203 Tel: 877-AMPROBE (267-7623) 2015 Amprobe For detailed specifications and ordering go to www.Amprobe.com 3612797 EDetailed Specifications Specications TIC 300 PRO LOW Range: 30 to 1500 VAC Operating Voltage HIGH Range: 1500 VAC to 122 kV AC *Use only with Amprobe optional accessory hot stick and proper safety equipment for voltages up to 122 kV AC Operating Temperature 0C to +52C (32F to +125F) RH < 90% RH Storage Temperature 0C to +52C (32F to +125F) battery removed. Environment < 2000m,outdoor operation Power 9 volt alkaline battery OFF: 340uA Power Consumption Low / High Detection mode: 39 mA Duty Cycle Continuous Response Time Instantaneous Dimensions 345(L) x 75(W) x 47(H)mm (13.5 x 3.0 x 1.8 in) Weight 243g (0.5 lb.) Supplied with User manual, battery and carrying case Range Non-Contact Voltage 30-1500 VAC Detection 1500- 122,000 VAC (with Hot Stick TIC 410A) Typical Sensitivity Self-Test Verification Line voltage (kV) Phase to ground Phase to phase phase to phase (ft-in) (m) (ft-in) (m) 0.03 to 1.0 note 1 note 1 note 1 note 1 1.1 to 15.0 2-1 0.64 2-2 0.66 15.1 to 36.0 2-4 0.72 2-7 0.77 36.1 to 46.0 2-7 0.77 2-10 0.85 46.1 to 72.5 3-0 0.90 3-6 1.05 72.6 to 121 3-2 0.95 4-3 1.29 Low Voltage High Voltage Detection Range (From the tip of the Detection Range (From the tip of the Voltage Voltage probe to the target line) probe to the target line) (Phase to neutral with 890k Ohm load) (Phase with no load) Average Average 30 V 1.5 1.5 kV 0.5 75 V 6.5 2.0 kV 1 100 V 8.5 4.0 kV 2 120 V 10 10.0 kV 8 220 V 11 15.0 kV 12 500 V 17 20.0 kV 18 1000 V 210 25.0 kV 22 For complete specifications please download the user manual on www.Amprobe.com. All Amprobe tools, including the Amprobe TIC 300 PRO, are rigorously tested for safety, accuracy, reliability, and ruggedness in our state-of-the-art test lab. In addition, Amprobe products that measure electricity are listed by a 3rd party safety lab, either UL or CSA. United States Department of Labor This system assures that Amprobe products meet or exceed safety regulations and will perform in a tough, professional environment for MSHA Mine Safety and Health Administration many years to come. Amprobe info amprobe.com Fluke Corporation, Everett, WA 98203 Tel: 877-AMPROBE (267-7623) 2015 Amprobe For detailed specifications and ordering go to www.Amprobe.com 3612797 E